Samsung Telephone SCH i700 Series User Guide

SCH-i700 Series  
Portable Digital Dual Band  
Telephone  
User’s Guide  
Please read this manual before operating your phone, and  
keep it for future reference.  
LMi700_091203_D11  
 
Samsung Telecommunications America (STA), Inc.  
Headquarters:  
1130 E. Arapaho Road  
Richardson, TX 75081  
Tel: 972-761-7000  
Fax: 972-761-7001  
Customer Care Center:  
1601 E. Plano Parkway  
Suite 150  
Plano, TX 75047  
Tel: 888-987-HELP (4357)  
Fax: 972-761-7501  
Internet Address: http://www.samsung.ca  
©2002-2003 Samsung Telecommunications America.  
All rights reserved. No reproduction in whole or in part  
allowed without prior written approval. Samsung is a  
registered trademark of Samsung Electronics America,  
Inc. and its related entities.  
Printed in South Korea  
 
3
 
4
Table of Contents  
 
5
 
6
 
7
 
8
 
9
 
10  
 
11  
 
12  
Chapter 1 - Getting Started  
The following topics are discussed in this Chapter:  
Turning the Phone On  
Entering the Owner Information  
Setting up Voicemail  
Contacting Customer Care  
 
 
Turning the i700 On  
To power up the i700, press  
located on the upper  
right side of the phone. Follow the steps on the display  
screen to align or calibrate the device. This procedure  
insures that when you press the screen using the  
stylus, the desired action occurs properly.  
Entering the Owners Information  
The owners information identifies the owner or user of  
the device. Name, company, address, phone number,  
email address, and note information fields are  
available. To enter the owners information:  
1. From the Today screen, use the stylus and tap on  
Owner.  
2. Tap the Name box in the Owner Information screen.  
3. Use the stylus to tap the correct letters and spaces using  
the on-screen keyboard. (To select the keyboard, tap the  
up arrow located in the lower right corner of the screen  
and select  
.)  
4. Tap the other desired information boxes and enter the  
information using the stylus and on-screen keyboard.  
5. When you are finished entering all the desired  
information, tap  
screen.  
in the upper right corner of the  
Chapter 1 - Getting Started  
14  
 
       
Setting up Voicemail  
All unanswered calls to your phone are sent to  
voicemail, even if your phone is in use or turned off.  
Therefore, you will want to set up your voicemail and  
personal greeting as soon as your phone is activated.  
To set up voicemail:  
1. Press the  
button located on the bottom front of  
to dial the voicemail system.  
the phone to display the phone screen.  
2. Tap and hold  
Note: One has been automatically reserved in speed dial for your  
voicemail. To dial voicemail without using speed dial, simply dial  
your own phone number and when the system answers, press  
and enter your password.  
3. When the system answers, tap  
password.  
and enter your  
4. Follow the system prompts to setup your voicemail.  
Contacting Customer Care  
If you are having problems with your new phone, call  
the Customer Care Center at (888) 987-4357. Please  
call using a phone other than your i700 in case any  
troubleshooting needs to be performed.  
Chapter 1 - Getting Started  
15  
 
       
Chapter 1 - Getting Started  
16  
 
Chapter 2 - Understanding your  
Phone  
The following topics are discussed in this Chapter:  
Front View of the i700  
Viewing the Phone Screen Icons  
Features of the i700  
Battery and Charger Accessories  
Displaying your Phone Number  
Making/Answering Calls  
 
 
Front View of the I700  
Chapter 2 - Understanding your Phone  
18  
 
   
Viewing the Phone Screen Icons  
Icon  
Definition  
This icon represents the signal strength. The  
more bars displayed, the better the signal.  
This icon is displayed when the phone is Off.  
Indicates that initial programing is required  
before operating your new phone.  
Indicates that the ringer is On.  
Indicates that the ringer is Off.  
Indicates that the vibrate function is turned On.  
Indicates that the i700 supports the 1X high  
speed data transfer protocol.  
This icon displays when two or more message  
icons are being displayed.  
Indicates missed calls. If you tap the icon a  
window is displayed indicating the amount of call  
missed. It also gives you the ability to view the  
missed call information.  
Chapter 2 - Understanding your Phone  
19  
 
   
Indicates that a new voicemail messages. If you  
tap this icon a window is displayed that allows  
you to listen to new voicemail messages.  
Indicates that a new SMS text message is  
available. If you tap this icon, a window is  
displayed that allows you to access the Inbox.  
Chapter 2 - Understanding your Phone  
20  
 
Features of the i700  
The i700 uses the Microsoft Pocket PC operating  
system, which supports thousands of applications.  
Using the ActiveSync operation, you can keep your PC  
and your i700 synchronized at all times. Some of the  
i700 features are:  
Large 240x320 pixel, 65k color Transflective TFT screen  
Built in Camera  
CDMA 2000 1X Technology  
Microsoft Pocket PC 2002 Phone Edition Software  
2 way SMS Messaging  
Voice Dialing  
Voice Memo  
Wireless Internet Capability  
Multi Media Card (MMC) / Secure Digital (SD) Expansion Card  
Capability  
16 Polyphonic Ringers.  
Chapter 2 - Understanding your Phone  
21  
 
   
Battery and Charger Accessories  
Your i700 comes with a standard battery, charger, and  
headset. It is very important to use only Samsung  
approved accessories to avoid damage to your phone.  
Battery Capacity  
Your phone is equipped with a standard rechargeable  
battery. The battery can be recharged before it is fully  
drained without causing battery damage.  
When the battery becomes low, a warning window is  
displayed and the unit automatically turns off the LCD.  
When there are approximately two minutes of talk time  
left, the phone sounds an audible alert every 30  
seconds and then powers down.  
Note: Long backlight settings, searching for service, vibrate mode  
and browser use affect the battery’s talk and standby times.  
Chapter 2 - Understanding your Phone  
22  
 
       
Installing the Battery  
1. Place the battery on the back of the phone, making sure  
that the plastic tabs are aligned with the corresponding  
holes in the phone.  
2. Gently push the battery up until it snaps into place.  
Chapter 2 - Understanding your Phone  
23  
 
   
Removing the Battery  
1. Push the battery release latch and slide the battery down  
from the phone.  
Chapter 2 - Understanding your Phone  
24  
 
   
Charging the Battery  
Your cellular Phone comes with a rechargeable battery.  
You should charge the battery as soon as possible so  
you can begin using your phone.  
Keeping track of your battery’s charge is important. If  
your battery level becomes too low, your phone  
automatically turns off and you’ll lose everything you  
were just working on. For a quick check of your phone’s  
battery level, tap the time located in the upper right  
corner of the screen. A battery icon is displayed in the  
Time and Next Appointment window.  
To perform a battery check using the drop down menu:  
1. Tap Start located in the upper left corner of the screen.  
2. Tap Settings.  
3. Tap System.  
4. Tap Power.  
There is also an internal backup battery that saves all  
the settings in the phone when the regular battery is  
discharged. An internal backup battery needs to be  
charged initially for 24 hours.  
The internal battery will maintain data for about 4 hours.  
You should perform ActiveSync operations or a backup  
utility frequently to avoid loosing any information if the  
battery is fully discharged. For more information see  
Chapter 2 - Understanding your Phone  
25  
 
   
Displaying your Phone Number  
To display your phone number:  
1. Press  
to display the phone screen.  
2. Tap Tools and select Options.  
3. The Settings screen is displayed. Your phone number is  
displayed at the top of the screen.  
4. Tap  
to exit.  
Making and Answering Calls  
Making Calls  
There are several different options that allow you to  
make calls on your new i700. You can use speed dial,  
voice dial, call history, or simply enter the desired  
number and tap  
.
Making a Call using the Keypad  
1. Press  
to display the phone screen.  
2. Tap the desired number using the stylus. If you make a  
mistake while dialing, tap  
. Tap and hold  
to  
clear all the digits and start over.  
Note: Always use the stylus when touching the screen to avoid  
scratching or damage caused by other instruments.  
3. Tap  
.
Chapter 2 - Understanding your Phone  
26  
 
         
One Handed Dialing  
One handed dialing allows you to make a call while  
using just one hand. To make a call:  
1. Press the Contacts  
button.  
2. Press the OK/Navigation key up or down to select the  
desired address book entry.  
Note: If you press and hold the OK/Navigation key down, letters are  
displayed that will automatically display the first entry beginning with  
that letter.  
3. Press the OK/Navigation key to display the entry  
information and phone number.  
Note: To return to the Contacts screen, press the OK/Navigation  
button while the entry is displayed.  
4. Press  
5. Press  
to display the number in the phone screen.  
again to dial the number.  
Answering Calls  
1. Make sure that the phone is turned On.  
2. When you receive an incoming call, the Phone Incoming  
screen is displayed. Tap Answer to answer the call or  
Ignore to silence the ringer and let the call go to  
voicemail.  
Note: When you receive an incoming call, you can silence the ringer  
by tapping  
.
Chapter 2 - Understanding your Phone  
27  
 
     
Chapter 2 - Understanding your Phone  
28  
 
Chapter 3 - Personal Settings  
The following topics are discussed in this Chapter:  
Buttons  
Input  
Menus  
Password  
Phone  
Sounds & Notifications  
 
   
Personal Settings  
The personal settings allow you to set the following  
options on your i700:  
Buttons  
Input  
Menus  
Password  
Phone  
Sounds and Notifications  
Today  
Owner Information  
These settings allow you to control the look and feel of  
the i700.  
To access the Personal Settings:  
1. Tap Start located in the upper left corner of the screen.  
2. Tap Settings.  
3. Tap the Personal tab.  
Buttons  
The Buttons setting allows you to configure which  
application launches when the record, contacts, or  
calendar buttons are pressed. The following table gives  
you the default settings and available applications for  
each button:  
To access the Button settings:  
Chapter 3 - Personal Settings  
30  
 
     
1. Tap Start located in the upper left corner of the screen.  
2. Tap Settings.  
3. Tap the Personal tab.  
4. Tap the Buttons icon.  
Button  
Applications  
Input Panel  
None  
Infrared Receive  
Internet Explorer  
Microsoft Reader  
MSN Messenger  
Notes  
Scroll Down  
Scroll Left  
Scroll Right  
Scroll Up  
Start Menu  
Today  
ActiveSync  
Calculator  
Calendar  
Camera  
Phone  
Pocket Excel  
Pocket Word  
Record (default)  
Solitaire  
Tasks  
Terminal Services Client  
Windows Media  
Contacts  
File Explorer  
Inbox  
(Same list as above)  
Contacts (default)  
Calendar (default)  
(Same list as above)  
Chapter 3 - Personal Settings  
31  
 
Input  
There are four different character input methods  
available. They are:  
Block Recognizer  
Keyboard  
Letter Recognizer  
Transcriber  
Each of these methods allow you to input alphanumeric  
characters and symbols into the i700. In addition to the  
input methods, there is Word Completion and other  
options associated with the input selected.  
To access the Input settings:  
1. Tap Start located in the upper left corner of the screen.  
2. Tap Settings.  
3. Tap the Personal tab.  
4. Tap the Input icon.  
Chapter 3 - Personal Settings  
32  
 
 
Block Recognizer  
This input method uses the traditional writing area box  
split in the middle. The left side is used to write letters  
and the right side is for number entry. Symbols and  
common functions are located in other smaller boxes  
located to the right of the writing box area. There are no  
options associated with this type of input method.  
Keyboard  
This input method displays an on-screen keyboard that  
can be used to input characters by tapping the screen  
using the stylus. The keyboard entry method has the  
following options:  
Large Keys  
Small Keys  
Use Gestures to Remove Keys from the Keyboard  
To select larger or smaller keys, simply tap the button  
next to the desired option.  
The gestures feature allows you to replace keys used  
on the keyboard for space, backspace, shift+key, and  
enter by drawing a gesture or motion. The large key  
option must be selected for this option to be available.  
Chapter 3 - Personal Settings  
33  
 
Letter Recognizer  
This option allows you to enter text using your own  
handwriting. The screen is divided into three different  
areas. A capitol letter area, small letter area, and a  
number area. Characters are entered by printing letters  
in each area. The character is then analyzed and typed  
on the screen automatically. The following options are  
associated with this method:  
Quick Stroke  
Right to Left Crossbar  
Allow Accented Characters  
Transcriber  
The transcriber option is similar to the letter recognizer,  
except instead of entering characters into a designated  
area, you can enter entire words and sentences using  
your own handwriting. Transcriber supports both  
printing and cursive writing styles and then  
automatically types the information on the screen. The  
following general options are associated with this  
method:  
Sound On - Turns the sound On or Off.  
Show intro screen - Displays the help or introduction screen  
whenever the transcriber option is selected.  
Show iconbar - Displays the iconbar.  
Inking Color - Allows you to select the color and size of the  
stroke line.  
Chapter 3 - Personal Settings  
34  
 
There are also some transcriber recognizer options.  
They are:  
Add space after - Automatically adds a space after each  
writing.  
Separate letters mode  
Speed of recognition vs Quality - Determines the speed at  
which the writing sample is analyzed. The faster the setting  
the less likely to get all words correct. Better quality is  
achieved with longer processing.  
Recognition start time - Allows you to set the time of  
recognition between new writings.  
Word Completion  
The word completion settings determine if words  
automatically display after entering a defined number of  
characters on the screen. The following options are  
available:  
Suggest words when entering text  
Suggest after entering 1-7 letters.  
Suggest 1-4 words.  
Add a space after suggest word.  
To select the desired number of letters or words, simply  
tap the drop down arrow associated with each option.  
Chapter 3 - Personal Settings  
35  
 
Options  
The options settings only apply when writing or  
recording is supported. In the options tab, you can  
select:  
Voice Recording Format  
PCM  
8,000 Hz, 8 Bit, Mono (8 KB/s)  
8,000 Hz, 8 Bit, Stereo (16 KB/s)  
8,000 Hz, 16 Bit, Mono (16 KB/s)  
8,000 Hz, 16 Bit, Stereo (31 KB/s)  
11,025 Hz, 8 Bit, Mono (11 KB/s)  
11,025 Hz, 8 Bit, Stereo (22 KB/s)  
11,025 Hz, 16 Bit, Mono (22 KB/s)  
11,025 Hz, 16 Bit, Stereo (43 KB/s)  
22,050 Hz, 8 Bit, Mono (22 KB/s)  
22,050 Hz, 8 Bit, Stereo (43 KB/s)  
22,050 Hz, 16 Bit, Mono (43 KB/s)  
22,050 Hz, 16 Bit, Stereo (86 KB/s)  
44,100 Hz, 8 Bit, Mono (43 KB/s)  
44,100 Hz, 8 Bit, Stereo (86 KB/s)  
44,100 Hz, 16 Bit, Mono (86 KB/s)  
44,100 Hz, 16 Bit, Stereo (172 KB/s)  
GSM 6.10  
8,000 Hz, Mono (2KB/s)  
Chapter 3 - Personal Settings  
36  
 
Default zoom level for writing  
- 75%  
- 100%  
- 150%  
- 200%  
- 300%  
Default zoom level for typing  
- 75%  
- 100%  
- 150%  
- 200%  
- 300%  
Capitalize the first letter of a sentence  
Scroll upon reaching the last line  
Menus  
There are two menus available in the i700 menu  
options. They are:  
Start Menu  
New Menu  
The Start menu options allow you to configure what is  
displayed when you tap the Start menu located in the  
upper left corner of the screen.  
The New menu options allow you to configure what is  
displayed when you tap on the New menu located in  
the bottom left corner of the screen.  
Chapter 3 - Personal Settings  
37  
 
 
Start Menu  
To access the Start menu:  
1. Tap Start located in the upper left corner of the screen.  
2. Tap Settings.  
3. Tap the Personal tab.  
4. Tap the Menus icon.  
5. Tap the Start Menu tab.  
6. Check the items that you want to be displayed in the  
Start menu. Items that are not checked are displayed in  
the Programs menu.  
7. Press  
to exit.  
New Menu  
To access the New menu options:  
1. Tap Start located in the upper left corner of the screen.  
2. Tap Settings.  
3. Tap the Personal tab.  
4. Tap the Menus icon.  
5. Tap the New Menu tab.  
Password  
The password option allows you to enable or disable a  
password. The available settings are:  
No password - This setting disables the password.  
Chapter 3 - Personal Settings  
38  
 
   
Simple 4-digit password - Allows you to set a four digit  
password using the on-screen keypad.  
Strong alphanumeric password - Allows you to enter a  
password that contains letters, numbers, or both.  
When a password is configured, there is a “prompt if  
device unused” option that allows a length of time  
range from 0 minutes - 24 hours. When this option is  
set, you can continue to use the i700 until the screen  
turns off due to inactivity. If the device is inactive for a  
greater amount of time than specified in the unused  
setting, a password must be entered when you turn the  
device back on. To set the password:  
1. Tap Start located in the upper left corner of the screen.  
2. Tap Settings.  
3. Tap the Personal tab.  
4. Tap the Password icon.  
5. Tap the desired password option and enter the  
password.  
6. If desired, set the “Prompt if device unused” time by  
tapping the drop down arrow and selecting the proper  
time increment.  
7. Tap  
.
8. Confirm the password setting by tapping Yes in the  
Password dialog box.  
Chapter 3 - Personal Settings  
39  
 
Phone  
The phone options displays all the available options for  
the phone. The options are divided into the following  
tabs:  
Phone - Allows you to configure a voicemail phone number.  
View your existing phone number. Select the desired sounds  
associated with the phone. Volume notification settings are  
also included.  
Option - Allows you to configure the Roaming, Answer, and  
Data/Fax settings.  
Sound - Allows you to turn on or off the minute beep,  
connect tone, or disconnect tone.  
Security - Allows you to set special numbers, change the  
password, or reset the phone to the factory default settings.  
Etc - Allows you set the time to auto or manual. Displays the  
current hardware and software version of the i700.  
Phone Tab  
These options allow you to configure several different  
settings that are specific to the phone including:  
Changing the Voicemail Dialup Number  
System Volume  
Notifications  
System Sounds  
Chapter 3 - Personal Settings  
40  
 
 
Voicemail settings  
To access the voicemail settings:  
1. Tap Start located in the upper left corner of the screen.  
2. Tap Settings.  
3. Tap the Personal tab.  
4. Tap the Phone icon.  
5. Tap the Phone tab.  
6. The number to call your voicemail is displayed in the  
Voicemail box. To change the number, tap the box and  
enter the desired number.  
Note: This number is automatically setup when you receive your  
phone. You will probably not need to change it unless otherwise  
instructed by your carrier.  
Chapter 3 - Personal Settings  
41  
 
Option Tab  
The option tab allows you to configure the following  
settings:  
Answer Options - Allows you to set up how the phone is  
answered. The Talk key or Any Key on the keypad can be  
used to answer an incoming call.  
Auto (Carkit/Headset) - This option can only be used with the  
optional carkit accessory. When using the carkit, the phone  
is automatically answered after 3, 5, or 10 seconds. The  
setting is independent of the carkit and can be set up before  
connecting.  
Data/Fax - The i700 can be used to receive an incoming fax  
or data call.  
Roaming - Allows you to select a desired roaming option. For  
To access the option settings:  
1. Tap Start located in the upper left corner of the screen.  
2. Tap Settings.  
3. Tap the Personal tab.  
4. Tap the Phone icon.  
5. Tap the Option tab.  
Chapter 3 - Personal Settings  
42  
 
Sounds  
These options allow you to configure the sounds for the  
i700. These include the ring type, ring tone, keypad  
sounds, and other sound settings. To access the sound  
settings:  
1. Tap Start located in the upper left corner of the screen.  
2. Tap Settings.  
3. Tap the Personal tab.  
4. Tap the Phone icon.  
5. Tap the Phone tab.  
6. Tap the Ring Type drop down arrow and select one of  
the following ring types:  
Ring  
Increasing Ring  
Ring Once  
Vibrate  
Vibrate and ring  
Vibrate then ring  
None  
7. Tap the Ring Tone drop down arrow and select one of  
the following ring tones:  
BellDitty  
Chime  
DefaultRing  
Digital  
Guitar  
Chapter 3 - Personal Settings  
43  
 
OldPhone  
RoaringGuitar  
Trio  
Welcome  
Hopmix  
Nobeat  
Scratch  
Solo  
SpanishGuitar  
Techie  
Voice  
Note: To hear the ring tone, use the player controls located to the  
right of the ring tone box. Tap the arrow to play the tone and then tap  
the square to stop.  
8. Tap the Keypad drop down arrow and select:  
Short Tones - When the on-screen keypad for the phone is  
tapped, a short tone is played.  
Long Tones - When the on-screen keypad for the phone is  
tapped, a long tone is played.  
Off - No tones are played when the on-screen keyboard for  
the phone is tapped.  
9. Tap  
to exit.  
Chapter 3 - Personal Settings  
44  
 
Other Sound Settings  
The other settings box located in the phone tab  
contains the settings for volume and notifications. The  
volume settings control the system volume and enable  
sounds for common functions.  
The notification settings allow you to select an  
individual event and then add a sound to the function.  
You can also select how to be notified when the event  
occurs or performs the intended function. To change  
the volume and select an event with notification:  
1. Tap Start located in the upper left corner of the screen.  
2. Tap Settings.  
3. Tap the Personal tab.  
4. Tap the Phone icon.  
5. Tap the Phone tab.  
6. Tap the Other Settings box.  
7. Tap the Volume tab.  
8. Tap the slider and select the desired System volume  
between Silent and Loud.  
9. Tap the desired check boxes under “Enable sounds  
for”.  
Note: Some choices are greyed out unless the proper check box is  
selected above the item.  
10. Tap the Notifications tab.  
11. Tap the event drop down arrow and select the desired  
event.  
Chapter 3 - Personal Settings  
45  
 
12. Tap the check box next to Play Sound to designate a  
notification sound for that event.  
13. Tap the drop down arrow next to the available sounds  
and select the desired sound.  
Note: Use the player controls to listen to the sounds.  
14. Select the other desired choices by tapping the check  
boxes. When finished, tap  
to exit.  
Chapter 3 - Personal Settings  
46  
 
Chapter 4 - Windows  
Applications and Text Entry  
The following topics are discussed in this Chapter:  
Navigating your PDA  
Shortcuts  
 
 
Navigating your PDA  
Your i700 provides the power of a personal computer  
with exceptional portability and integration. Unlocking  
its power begins with customizing the i700 so that it  
becomes an extension of your desktop or laptop  
computer.  
The i700 is Pocket PC 2002 Windows Powered,  
providing the power and familiarity of Windows that you  
are used to. Pocket versions of popular Microsoft  
applications such as Word, Excel, Windows Media  
®
®
Player and Outlook eliminate the need to learn new  
software.  
Start Menu  
The start menu contains links to all the applications and  
settings information, similar to a Windows based PC  
system. To access the start menu, simply use the  
stylus to tap in the upper left corner of the screen on  
the word Start. An immediate menu list is displayed.  
From the pull down menu, all applications and settings  
can be accessed.  
Launching an Application  
To launch an application:  
1. Tap Start located in the upper left corner of the screen.  
2. Look for the desired application listed in the Recent  
Program list. If it is not found, tap Programs.  
3. Tap the desired program icon to launch the application.  
Chapter 4 - Windows Applications and Text Entry  
48  
 
       
Shortcuts  
New Command  
The New command located in the bottom left side of  
the screen allows you to create a new:  
Appointment  
Contact  
E-mail Message  
Excel Workbook  
Note  
Task  
Word Document  
To access the new command:  
1. Tap New located in the bottom left corner of the screen.  
2. Select any of the choices to launch the application.  
Time & Appointments  
To view the next upcoming appointment and battery  
indicator without launching the calendar or today  
screen:  
1. Tap the time in the upper right corner of the screen.  
2. The Time and Next Appointment screen is displayed.  
Chapter 4 - Windows Applications and Text Entry  
49  
 
       
Chapter 4 - Windows Applications and Text Entry  
50  
 
Chapter 5 - Phone Settings  
The following topics are discussed in this Chapter:  
Setting the Desired Volume Level  
Tone Length  
Alerts Sounds & Notifications  
Turning the Ringer Off  
 
 
Setting the Volume Levels  
There are several different volume levels that can be  
configured on the i700. They are:  
Voice Volume  
Record Volume  
Ring Volume  
System Volume  
Voice Volume  
The voice volume determines the volume setting of the  
incoming caller. This setting can be set quickly by  
pressing the up or down volume button located on the  
side of the phone. To access the voice volume settings  
in the phone:  
1. Tap Start located in the upper left corner of the screen.  
2. Tap Settings.  
3. Tap the System tab.  
4. Tap Volume.  
5. Using the stylus, tap the desired level on the slider  
located under Voice Volume.  
Note: You can also press and hold the slider tab and move it back  
and forth along the slider using the stylus.  
6. Tap  
to exit.  
Chapter 5 - Phone Settings  
52  
 
       
Record Volume  
The record volume determines the recording levels for  
voice memo’s, notes, or recorded conversations. The  
higher the setting, the more sensitive the microphone.  
To access the record volume settings:  
1. Tap Start located in the upper left corner of the screen.  
2. Tap Settings.  
3. Tap the System tab.  
4. Tap Volume.  
5. Using the stylus, tap the desired level on the slider  
located under Record Volume.  
6. Tap  
to exit.  
Ring Volume  
The ring volume determines the volume setting for the  
ringer associated with the phone. You can also set the  
ringer silent if needed to avoid disturbing others in a  
quiet setting. To access the ring volume settings:  
1. Tap Start located in the upper left corner of the screen.  
2. Tap Settings.  
3. Tap the System tab.  
4. Tap Volume.  
5. Using the stylus, tap the desired level on the slider  
located under Ring Volume.  
6. Tap  
to exit.  
Chapter 5 - Phone Settings  
53  
 
       
System Volume  
The system volume determines the volume settings for  
the operating system installed on the i700. A beep or  
other sound is heard while navigating through the  
menus. To access the system volume setting:  
setting. To access the ring volume settings:  
1. Tap Start located in the upper left corner of the screen.  
2. Tap Settings.  
3. Tap the Personal tab.  
4. Tap Sounds & Notifications.  
5. Using the stylus, tap the desired level on the slider  
located under System Volume.  
6. Tap  
to exit.  
Chapter 5 - Phone Settings  
54  
 
   
Setting the Tone Length  
When dialing a phone number, tones are emitted each  
time a key is tapped. These tones can be set up to be  
short, long, or turned off. In some cases, longer tone  
lengths may be required for accessing automated  
systems or voicemail. To set the tone length:  
1. Tap Start located in the upper left corner of the screen.  
2. Tap Settings.  
3. Tap the Personal tab.  
4. Tap Phone.  
5. Tap the drop down arrow next to Keypad and select  
Short Tones, Long Tones, or Off.  
6. Tap  
to exit.  
Chapter 5 - Phone Settings  
55  
 
   
Alert Sounds & Notifications  
Alert sounds can be configured for the following events:  
ActiveSync: Begin sync  
ActiveSync: End sync  
Beam: Autoreceive  
Inbox: New e-mail message  
Inbox New SMS message  
MSN Messenger: Contact online  
MSN Messenger: New message  
Phone: Incoming call  
Phone: Missed call  
Phone: Voice mail  
Reminders  
Selecting a Ringer for Incoming, Missed Calls, or  
Voice Mail  
To select a ringer for incoming calls:  
1. Tap Start located in the upper left corner of the screen.  
2. Tap Settings.  
3. Tap the Personal tab.  
4. Tap Phone.  
5. Tap Other Settings.  
6. Tap the drop down arrow under Select an event and  
select Phone: Incoming Calls, Phone: Missed Calls,  
or Phone: Voice Mail.  
Chapter 5 - Phone Settings  
56  
 
       
7. If you selected Phone: Incoming Calls, tap the drop down  
arrow next to Ring Type and select one of the following:  
Ring  
Increasing Ring  
Ring Once  
Vibrate  
Vibrate and ring  
Vibrate then ring  
None  
8. If you selected Ring, Increasing ring, or Ring Once, tap  
the drop down arrow next to Ring Tone and select the  
desired ringer.  
Note: To play the selected ringer, tap the play button arrow located  
under the ring tone box.  
9. Tap  
to exit.  
Note: If you save .wav files in the windows/rings directory, the file  
can be selected as a Ring Tone.  
Chapter 5 - Phone Settings  
57  
 
Turning the Ringer Off  
In some cases, it may be necessary to turn off the  
ringer to avoid causing a problem for those around you.  
To turn off the ringer or set it to vibrate:  
1. Tap Start located in the upper left corner of the screen.  
2. Tap Settings.  
3. Tap the Personal tab.  
4. Tap Phone.  
5. Tap the drop down arrow next to Ring Type and select:  
Vibrate  
None  
6. Tap  
to exit.  
Note: You can also change the setting quickly by pressing the  
volume key up or down when the phone screen is displayed.  
Chapter 5 - Phone Settings  
58  
 
   
Chapter 6 - Security Settings  
The following topics are discussed in this Chapter:  
Accessing the Security Options  
Special Numbers  
Locking the i700  
Unlocking the i700  
 
   
Accessing the Security Options  
The i700 has several security options associated with  
the phone that help guard against unauthorized usage.  
The security options allow you to configure special  
numbers, change the password, and reset the phone.  
Special Numbers  
Special numbers are numbers that can be called when  
the phone is placed in lock mode. Up to 10 numbers  
can be assigned in the special numbers dialog box. To  
set up the special numbers:  
1. Tap Start located in the upper left corner of the screen.  
2. Tap Settings.  
3. Tap the Personal tab.  
4. Tap Phone.  
5. Tap the Security tab.  
6. Tap the Special Number box.  
7. Double tap on one of the entries to edit or enter a new  
number.  
8. Tap  
to exit.  
Locking the i700  
When you lock your phone, it requires a password to  
return to normal operation. When a password is set up,  
the phone can be locked immediately or configured to  
lock when the screen blanks out. To lock the phone:  
Chapter 6 - Security Settings  
60  
 
           
1. Tap Start located in the upper left corner of the screen.  
2. Tap Settings.  
3. Tap the Personal tab.  
4. Tap Password.  
5. Select one of the following options:  
Simple 4 digit password  
Strong alphanumeric password  
6. Tap the drop down arrow and select the desired unused  
time.  
7. Enter the password and tap  
8. Tap to confirm.  
.
Unlocking the i700  
To unlock your phone:  
1. Tap Start located in the upper left corner of the screen.  
2. Tap Settings.  
3. Tap the Personal tab.  
4. Tap Password.  
5. Enter your password.  
6. Select No Password and tap  
.
7. Tap Yes to confirm.  
Chapter 6 - Security Settings  
61  
 
   
Chapter 6 - Security Settings  
62  
 
Chapter 7 - Understanding  
Roaming  
The following topics are discussed in this Chapter:  
Roaming Overview  
Roaming Options  
 
 
Roaming  
Roaming occurs when you travel outside the  
designated coverage area. Your phone automatically  
switches to roaming and the roaming icon is displayed  
on the screen. Your phone can roam on other digital  
networks. When you are roaming, extra charges may  
apply when making or receiving a call.  
When you are roaming, some of the phone’s features  
may not be available. When you are roaming, your  
phone requires additional power from the battery and  
may need to be recharged more frequently.  
Roaming Options  
The following roaming options are available:  
Home only - Your phone seeks only designated home  
systems and will prevent roaming on other systems.  
Automatic - Automatically seeks the most preferred digital  
service. When such service is unavailable, it searches for an  
alternative system.  
Note: Contact your service provider for information regarding  
preferred systems.  
Chapter 7 - Understanding Roaming  
64  
 
       
Chapter 8 - Messaging  
The following topics are discussed in this Chapter:  
Message Types  
Voicemail  
Text Messaging  
 
 
Message Types  
Your phone can send and receive the following types of  
messages:  
Voicemail  
SMS Text Messages  
E-mail messages  
Numeric Pages  
Messages are received at all times, even when the  
phone is powered off or locked. When a new message  
is received, a notification is displayed and a tone is  
sounded.  
Voicemail  
If a new voicemail is received, a notification screen is  
displayed alerting you that a new message is available.  
If multiple voicemail messages are received, the  
notification screen displays the number of new  
messages received.  
Connecting to the Voicemail System  
To connect to voicemail:  
1. Tap the alert icon  
at the top of the screen.  
Note: The alert icon is displayed when more than one alert is  
available.  
2. Tap the voice mail icon  
.
Note: You can also tap and hold  
to speed dial voicemail.  
3. Tap the Voice Mail button to connect.  
Chapter 8 - Messaging  
66  
 
       
4. When the voicemail system connects, tap  
5. Enter your password.  
.
6. Press to listen  
to your messages.  
Text Messaging  
The i700 allows you to create and send text messages  
to other users with SMS capability. Text messaging,  
also known as SMS (Short Message Service) allows  
short text messages to be received and displayed on  
your phone. 2-Way Text Messaging, also known as  
MO-SMS (Mobile-Originated Short Message Service,)  
allows messages to be sent from your phone.  
Messages can be sent from one phone to another by  
addressing the message to the recipient's phone  
number.  
Creating a New Message  
1. From the phone screen, tap Tools and select Send  
SMS.  
2. Enter the phone number of the message recipient(s) in  
the To: field.(Up to ten people can be sent the same  
SMS message at one time. For multiple numbers, use a  
semi-colon).  
Note: To select a number from contacts, tap  
. Tap the icon again  
to display the text area.  
3. Tap the Subj: field and enter a title for the message.  
4. Tap the message area and enter the desired message  
using the desired input method. When finished, tap the  
double drop down arrows to the right of the Subj: field.  
Chapter 8 - Messaging  
67  
 
   
5. Tap the drop down arrow next to Service and make sure  
that SMS is selected.  
6. If you would like a delivery confirmation that the message  
was delivered, tap Edit and select Options. Tap the  
check box next to Request SMS text message delivery  
notification.  
7. Tap Send to send the message.  
Chapter 8 - Messaging  
68  
 
E-mail Messages  
E-mail messages can be sent and received using  
Microsoft Outlook and ActiveSync. Messages are sent  
and received using the desktop/laptop computer during  
an ActiveSync operation. To send an e-mail message:  
1. From the phone screen, tap Tools and select Send  
SMS.  
2. Enter the e-mail address in the To: field.(Up to ten  
people can be sent the same SMS message at one time.  
For multiple e-mail addresses, use a semi-colon).  
Note: To select an e-mail address from contacts, tap  
. Tap the  
icon again to display the text area.  
3. Tap the Subj: field and enter a title for the message.  
4. Tap the message area and enter the desired message  
using the desired input method. When finished, tap the  
double drop down arrows to the right of the Subj: field.  
5. Tap the drop down arrow next to Service and make sure  
that ActiveSync is selected.  
6. Tap Send.  
7. Perform an ActiveSync operation to send the e-mail  
message. For more information on performing an  
Chapter 8 - Messaging  
69  
 
   
Message Options  
Several options are associated with sending an SMS  
message. They are:  
Edit My Text Messages  
Spell Check  
Language  
Cancel Message  
My Text Messages  
My Text Messages are default text messages that can  
be used quickly to send common text (SMS) messages  
without having to type the message. A total of 10  
messages can be saved. The default messages are:  
Yes.  
No.  
I can’t talk right now.  
I’ll be right there.  
I’m running late.  
Where are you?  
Hi.  
Goodbye.  
Call me later.  
I love my Pocket PC!  
Using My Text Messages  
1. Create a new SMS Message.  
2. Tap My Text and select the desired message from the  
list.  
Chapter 8 - Messaging  
70  
 
       
3. Tap Send to send the message.  
Editing My Text Messages  
To edit My Text Messages:  
1. Open an SMS Message.  
2. Tap Edit and select Edit My Text Messages.  
3. Select the message that you would like to edit.  
4. Delete the old message from the box and enter the new  
message.  
5. Tap  
to save and exit.  
Performing a Spell Check  
To perform a spell check:  
1. Create a new SMS Message.  
2. Tap Edit and select Spell Check.  
3. When the spell check is finished, tap  
4. Tap Send to send the message.  
.
Language  
There are several different languages available when  
creating a new message. To select the desired  
language:  
1. Create a new message from the Inbox.  
2. Tap Edit and select Language.  
3. Select the desired language from the list.  
Chapter 8 - Messaging  
71  
 
           
Cancel a Message  
To cancel a message:  
1. From the new message screen, tap Edit and select  
Cancel Message.  
SMS Message  
SMS Inbox  
SMS messages are saved in the SMS Inbox. If the  
memory is full, new messages are rejected. Older  
messages can be deleted to free up space for the  
incoming messages. To access the SMS Inbox:  
1. Tap Start located in the upper left corner of the screen.  
2. Tap Inbox.  
3. Tap the drop down arrow next to Inbox and select Inbox  
under the SMS directory.  
Note: The i700 does not support the alert function when a repeated  
message is received. If a duplicate message is received, “New  
Message” instead of “Duplicate Message” is displayed on screen.  
SMS Outbox  
When you send a message, it is stored in the SMS  
Outbox until sent. Messages are sent using the i700  
and the SMS Outbox is cleared.  
To access the SMS Outbox:  
1. Tap Start located in the upper left corner of the screen.  
2. Tap Inbox.  
Chapter 8 - Messaging  
72  
 
           
3. Tap the drop down arrow next to Inbox and select  
Outbox under the SMS directory.  
SMS Sent Items  
Sent Items keeps a record of all the SMS messages  
sent from your phone.  
To access sent items:  
1. Tap Start located in the upper left corner of the screen.  
2. Tap Inbox.  
3. Tap the drop down arrow next to Inbox and select Sent  
Items under the SMS directory.  
SMS Drafts  
SMS Drafts contain all the SMS messages that were  
not completed and saved to send at a later time. These  
messages are accessed from the drafts folder in the  
SMS Inbox. To access the stored folder:  
1. Tap Start located in the upper left corner of the screen.  
2. Tap Inbox.  
3. Tap the drop down arrow next to Inbox and select Drafts  
under the SMS directory.  
SMS Deleted Items  
SMS Deleted items keeps a copy of all the messages  
that were deleted. Once the messages are removed  
from the SMS deleted items folder, they are  
permanently erased. To access the SMS deleted  
folder:  
Chapter 8 - Messaging  
73  
 
           
1. Tap Start located in the upper left corner of the screen.  
2. Tap Inbox.  
3. Tap the drop down arrow next to Inbox and select  
Deleted Items under the SMS directory.  
ActiveSync Mail  
ActiveSync Inbox  
E-mail messages are saved in the ActiveSync Inbox. If  
the memory is full, new messages are rejected. Older  
messages can be deleted to free up space for the  
incoming messages. To access the ActiveSync Inbox:  
1. Tap Start located in the upper left corner of the screen.  
2. Tap Inbox.  
3. Tap the drop down arrow next to Inbox and select Inbox  
under the ActiveSync directory.  
ActiveSync Outbox  
When you send a message, it is stored in the  
ActiveSync Outbox until sent. When an ActiveSync is  
performed, the messages are sent using the desktop  
machine and the ActiveSync Outbox is cleared.  
To access the ActiveSync Outbox:  
1. Tap Start located in the upper left corner of the screen.  
2. Tap Inbox.  
3. Tap the drop down arrow next to Inbox and select  
Outbox under the ActiveSync directory.  
Chapter 8 - Messaging  
74  
 
         
ActiveSync Sent Items  
Sent Items keeps a record of all the messages sent  
from your phone.  
To access sent items:  
1. Tap Start located in the upper left corner of the screen.  
2. Tap Inbox.  
3. Tap the drop down arrow next to Inbox and select Sent  
Items under the ActiveSync directory.  
ActiveSync Drafts  
ActiveSync Drafts contain all the e-mail messages that  
were not completed and saved to send at a later time.  
These messages are accessed from the drafts folder in  
the ActiveSync Inbox. To access the stored folder:  
1. Tap Start located in the upper left corner of the screen.  
2. Tap Inbox.  
3. Tap the drop down arrow next to Inbox and select Drafts  
under the ActiveSync directory.  
Chapter 8 - Messaging  
75  
 
       
ActiveSync Deleted Items  
Deleted items keeps a copy of all the messages that  
were deleted. Once the messages are removed from  
the deleted items folder, they are permanently erased.  
To access the deleted folder:  
1. Tap Start located in the upper left corner of the screen.  
2. Tap Inbox.  
3. Tap the drop down arrow next to Inbox and select  
Deleted Items under the ActiveSync directory.  
Chapter 8 - Messaging  
76  
 
   
Inbox Tools  
The Inbox Tools menu displays status information and  
allows you to manage the Inbox settings. The following  
options are available in the Inbox Tools menu:  
Manage Folders - Allows you to organize the folders in the  
Inbox.  
Empty Deleted Items - Deletes the messages in the Deleted  
Items folder.  
Edit My Text Messages - Edits the canned text messages.  
Status - Displays a list of how many messages sent, copied,  
to be copied, or deleted.  
Options - Displays the services, message, address, and  
storage options of the phone.  
To access the Inbox Tools menu:  
1. Tap Start located in the upper left corner of the screen.  
2. Tap Inbox.  
3. Tap Tools at the bottom of the display.  
Chapter 8 - Messaging  
77  
 
 
Options  
The options menu allows you to display configuration  
settings for:  
Services - Allows you to create a new service of modify the  
settings for an existing service.  
Message - Displays the message configuration settings.  
Address - Displays the address options.  
Storage - Allows you to view the amount of space free space  
left in memory or on the optional storage card.  
Services  
The Services tab allows you to create a new service or  
configure an exiting one. When creating a new service,  
you will need to know the type of email account,  
incoming and outgoing servers, and login information  
before going through the service set up. To access the  
service options:  
1. Tap Start located in the upper left corner of the screen.  
2. Tap Inbox.  
3. Tap Tools and select Options.  
4. Tap the Services tab.  
Chapter 8 - Messaging  
78  
 
 
Creating a new Service  
To create a new Service:  
1. Tap Start located in the upper left corner of the screen.  
2. Tap Inbox.  
3. Tap Tools and select Options.  
4. Tap the Services tab.  
5. Tap the New button.  
6. Enter e-mail address in the space provided and tap Next.  
7. Allow the Auto-Configuration application to attempt to  
automatically configure your e-mail settings and tap  
Next.  
8. Enter Your Name, User Name, and Password and tap  
Next.  
Note: Tap the check box next to Save Password to allow you to enter  
the e-mail account without having to enter a password each time.  
9. Select the service type and enter a name for the service.  
Tap Next.  
10. Enter the Incoming and Outgoing server information.  
Enter the Domain name and tap Finish.  
Chapter 8 - Messaging  
79  
 
Message Options  
To access the message options:  
1. Tap Start located in the upper left corner of the screen.  
2. Tap Inbox.  
3. Tap Tools and select Options.  
4. Tap the Message tab.  
Address Options  
To access the message options:  
1. Tap Start located in the upper left corner of the screen.  
2. Tap Inbox.  
3. Tap Tools and select Options.  
4. Tap the Address tab.  
Storage Options  
To access the message options:  
1. Tap Start located in the upper left corner of the screen.  
2. Tap Inbox.  
3. Tap Tools and select Options.  
4. Tap the Storage tab.  
Chapter 8 - Messaging  
80  
 
Chapter 9 - Call Logs  
The following topics are discussed in this Chapter:  
Call Logs  
 
 
Call Logs  
When a call is received, made, or missed a record of  
the call is saved with all the available information in a  
call log. The call logs are:  
All - Displays all call received, sent, or missed.  
Missed - Displays any missed calls.  
Outgoing - Displays all outgoing calls made from your  
phone.  
Incoming - Displays all incoming calls that were answered.  
By Caller - Allows you to select an entry from the contacts  
and then displays any call information related to the contact.  
If you tap the entry, the time, date, and duration of the  
call is displayed.  
Making a Call from the Call Log  
To make a call:  
1. From the phone screen, tap  
.
2. Tap the drop down arrow in the upper left corner and  
select the desired call log list.  
3. Tap the phone icon located to the left of the entry to  
make a call.  
4. When finished, tap  
.
Call Log Options  
Call log options allows you to view the call times for all  
calls and recent calls. You can also set the amount of  
Chapter 9 - Call Logs  
82  
 
           
time to keep call log items before they are deleted. To  
access the call log options:  
1. From the phone screen, tap  
.
2. Tap Tools and select Options.  
3. Tap the drop down arrow under Delete call log items  
older than and select one of the following:  
1 week  
1 month  
2 months  
3 months  
6 months  
1 year  
never  
4. Tap  
to exit.  
Creating a New Contact from the Call Log  
To create a new contact from a call log entry:  
1. From the phone screen, tap  
.
2. Tap the drop down arrow in the upper left corner and  
select the desired call log list.  
3. Tap and hold on the desired entry. Select New Contact  
from the menu.  
4. Enter the contact information. When finished, tap  
.
Deleting Call Log Entries  
To delete the call log entries:  
Chapter 9 - Call Logs  
83  
 
       
1. From the phone screen, tap  
.
2. Tap the drop down arrow in the upper left corner and  
select the desired call log list to delete.  
Note: To delete all call log entries, select All Calls.  
3. Tap Tools and select Delete All Calls.  
4. Tap Yes to confirm the deletion.  
5. Tap  
to exit.  
Sending a SMS Message from a Call Log Entry  
SMS or Short Messages can be sent to other users that  
support SMS capabilities.  
Note: Contact your service provider for more information on SMS  
messaging services.  
To send a new SMS message from a call log entry:  
1. From the phone screen, tap  
.
2. Tap the drop down arrow in the upper left corner and  
select the desired call log list.  
3. Tap and hold on the desired entry. Select Send SMS  
from the menu.  
4. Enter the subject and message in the spaces provided.  
When finished, tap  
.
Note: Make sure that SMS is selected in the Services field or else the  
message cannot be sent.  
Chapter 9 - Call Logs  
84  
 
   
Chapter 10 - Call Features  
The following topics are discussed in this Chapter:  
Caller ID  
Call Waiting  
Call Forwarding  
Three-Way Calling  
Caller ID  
Caller ID alerts you to who’s calling by displaying the  
phone number of the person calling when you receive  
an incoming call. Similarly, if you call someone who has  
this feature, your phone number displays on their  
phone. If the caller’s name and number are already  
stored in your Internal Phone Book, the corresponding  
name appears with the number.  
To block caller ID from displaying when you call  
another user:  
1. Tap  
and then dial the phone number.  
 
     
Call Waiting  
You can answer an incoming call while on an existing  
call. If you are on an existing call and another call is  
received, a tone is heard and a call waiting message is  
displayed on the screen. If the caller is stored in the  
address book, their name is also displayed.  
Answering a Waiting Call  
1. Tap the Answer button. The phone connects to the other  
call while placing the existing caller on hold.  
2. Tap the  
original caller.  
button again to switch back over to the  
Call Forwarding  
Call Forwarding allows you to forward all your incoming  
calls to another phone number - even when your phone  
is turned off. You can still make calls from your phone  
with Call Forwarding activated.  
To activate call forwarding:  
1. Tap  
.
2. Enter the area code and phone number where the  
incoming calls are forwarded.  
3. Tap  
. A confirmation recording confirms the  
feature change.  
To deactivate call forwarding:  
1. Tap  
2. A confirmation recording confirms the feature change.  
Chapter 10 - Call Features  
86  
 
       
Three Way Calling  
Three way calling allows you to talk to two different  
people at the same time. When using this feature,  
normal airtime rates apply for each of the two calls.  
To use three way calling:  
1. Enter the number you wish to call and tap  
.
2. During the conversation, tap  
3. Dial the second person and tap  
.
.
4. When the person answers, tap  
all three parties.  
again to connect  
If one of the people you called hangs up, you and the  
remaining caller stay connected. If you initiated the call  
and are the first one to hang up, all three calls are  
disconnected.  
Chapter 10 - Call Features  
87  
 
   
Chapter 10 - Call Features  
88  
 
Chapter 11 - Contacts  
The following topics are discussed in this Chapter:  
Contacts  
Notes  
Making calls from Contacts  
Speed Dialing  
Beaming Contacts  
 
 
Contacts  
Contacts is used to save important information  
regarding your friends, colleagues, or business  
acquaintances. The contacts screen allows you to save  
the persons:  
Name  
Job Title  
Department  
Company  
Work Number, Fax, & Address  
E-mail  
Mobile Number  
Web Page  
Office Location  
Home Number, Address, & Fax  
Categories  
Other Addresses  
Pager  
Car Telephone  
Birthday  
Anniversary  
Spouse  
Children  
Assistant  
Assistant Telephone  
Radio Telephone  
Chapter 11 - Contacts  
90  
 
   
In addition to all the information available in the  
contacts, you can also record or write a note  
associated with the contact. All of this information can  
be synchronized with a PC or Laptop using the  
Microsoft ActiveSync application. For more information  
Adding a New Contact  
To add a new contact:  
1. Tap Start located in the upper left corner of the screen  
and select Contacts.  
Note: You can also press the Contacts button  
located in the  
front on the bottom right corner of the i700.  
2. Tap New.  
3. Enter the desired information in the spaces provided.  
When finished, tap  
.
Finding a Contact  
To locate a specific contact, you can use the find  
feature. Find allows you to enter the first few letters of  
the contact entry and then have the results displayed  
on the screen. The Find box is located in the upper  
right corner of the contact screen. To find a contact:  
1. Press  
to open Contacts.  
2. Tap the Find box and enter the first few letters of the  
desired entry.  
3. Tap the entry from the list of possible matches to view  
the summary screen  
Chapter 11 - Contacts  
91  
 
       
4. If the entry is not the one your looking for, tap  
return to the list of possible matches.  
to  
Editing a Contact  
To edit an existing contact entry:  
1. Press  
to open Contacts.  
2. Locate the desired contact using find or scrolling through  
the contact list with the navigation key.  
3. Tap the desired contact to view the summary screen.  
4. Tap Edit.  
5. Change or update the desired information.  
6. Tap  
to save and exit.  
Deleting a Contact  
To delete a contact:  
1. Press  
to open Contacts.  
2. Tap the desired contact from the list.  
3. Tap Tools and select Delete Contact.  
4. Tap Yes to confirm the deletion.  
Adding a Note  
The notes feature allows you to record or write a note  
that is attached and saved with the contact entry. When  
you view the summary screen on the contact, you can  
view or listen to any notes that are associated with the  
contact. To access the note for a contact:  
Chapter 11 - Contacts  
92  
 
           
1. Press  
to open Contacts.  
2. Tap the desired contact from the list.  
3. Tap the Notes tab.  
4. To record a note, tap record icon  
located in the  
command bar. Tap  
Tap when finished.  
to begin the voice recording.  
5. To write a note, tap the pen icon  
using the desired entry method.  
and enter the note  
6. To exit and save, tap  
.
Deleting a Note  
To delete a note:  
1. Press  
to open Contacts.  
2. Tap the desired contact from the list.  
3. Tap the Notes tab.  
4. Tap Edit and select Select All.  
5. Tap Edit and select Clear.  
Making a Call from Contacts  
To make a call from the contacts screen:  
1. Press to open Contacts.  
2. Tap the desired contact from the list.  
3. From the summary screen, tap the phone number.  
4. The call is dialed automatically. To end the call, tap the  
End button in the Phone-Connected screen.  
Chapter 11 - Contacts  
93  
 
       
Note: If you tapped the Hide button, you can display the phone main  
screen by tapping the phone signal strength icon located in the top  
right of the screen.  
Speed Dialing  
Speed dial can be used to the dial contacts that you  
talk to the most. Speed dial allows you to press either  
one or two keys and connect to the contact. Memory  
locations 2-99 are available for speed dialing. To speed  
dial:  
1. Press  
to open Contacts.  
2. Tap the desired contact from the list.  
3. Tap Tools and select Add Speed Dial.  
4. Tap the up or down arrows next to Location to select the  
desired memory location.  
5. To save, tap  
.
6. To exit the contact summary screen, tap  
again.  
Chapter 11 - Contacts  
94  
 
   
Beaming Contacts  
Your i700 is equipped with an infrared port (IR) which  
allows you to send and receive information wirelessly  
between two IR Pocket PC devices. To beam a  
contact:  
1. Press  
to open Contacts.  
2. Tap the desired contact from the list to view the summary  
screen.  
3. Tap Tools and select Beam Contact.  
4. Align the ports between the two devices.  
5. When the contact has been successfully transferred, tap  
to exit.  
Chapter 11 - Contacts  
95  
 
   
Chapter 11 - Contacts  
96  
 
Chapter 12 - Calendar  
The following topics are discussed in this Chapter:  
Today  
Scheduling an Alarm  
Calendar  
Scheduling an Appointment  
Changing the Calendar View  
Calendar Options  
Tasks  
 
 
Today  
The Today screen is used as a default information  
screen on the Pocket PC. When the i700 is powered  
on, the Today screen is displayed. Information  
displayed relates to the current day. The today screen  
displays the following information on the screen:  
Current Date and Time  
Owner Information  
Current Appointments  
Message Status  
Data Call State  
Enhanced Roaming Indicator  
Current Tasks  
Date and Time Settings  
The clock settings can be accessed from the Today  
screen by tapping the clock icon next to the day and  
date entry on the screen. The Clock settings allow you  
to set the time zone, time, and date for your home or a  
visiting location. To access the clock screen:  
1. From the Today screen, tap the clock icon  
2. Select either Home or Visiting.  
.
3. Set the time zone using the drop down arrow.  
4. Tap the up or down arrow to set the correct time.  
Note: You can also tap the clock face and set the desired time.  
5. Tap the drop down arrow to set the correct date.  
Chapter 12 - Calendar  
98  
 
       
6. Tap  
to save and exit.  
Scheduling an Alarm  
Your phone has four programable alarm clocks that  
can be configured to ring daily at a desired time. To set  
up the alarm clock:  
1. From the Today screen, tap the clock icon  
2. Tap the Alarms tab.  
.
3. Tap the box next to the desired alarm.  
4. Tap the day of the week.  
5. Tap the time to display the time settings. Tap the up or  
down arrows to select the desired time.  
Note: Tap the AM or PM to cycle between them.  
6. Tap  
7. Tap  
when finished.  
again to save and exit.  
Owner Information  
The owner information contains the personal  
information about the individual that uses the device on  
a constant basis. This information should be set up  
when you first use your i700. For more information on  
setting up the owner information, see “Entering the  
Chapter 12 - Calendar  
99  
 
       
Data Call State  
The data call state indicates the progress of a data  
transmission. There are three states associated with  
the data call:  
Green - Connecting to the network for transmission.  
Dark Grey with Light On - Dormant state. No activity.  
Dark Grey with Light Off - Disconnected.  
There are RX (Receiving) and TX (Transmitting) status  
bars located on the Today screen. If you tap on the RX  
or TX status bar, you can select the desired USB path.  
The available choices are:  
External Data Call  
ActiveSync  
Chapter 12 - Calendar  
100  
 
 
Calendar  
The calendar allows you to create appointments and  
reminders for the day, week, month, or year.  
Scheduling an Appointment  
An entry in the calendar is called an appointment or  
reminder. When you schedule something, a description  
is displayed on the time line, and the duration is set to 1  
hour by default. You can easily change the start time  
and duration for any event.  
You can schedule the following types of events in the  
calendar:  
Timed appointments, such as meetings, that have a specific  
date, start, and end time.  
Untimed reminders, such as birthdays, holidays, and  
anniversaries. These occur on a particular date but have no  
specific start or end times; they appear at the top of the list of  
times in a shaded area. You can schedule more than one  
untimed event on the same date.  
Repeating appointments, such as a weekly meeting that is held  
on the same day at the same time each week.  
Continuous appointments, such as a vacation or three-day  
conference.  
All day events, which reflect the default length of the day as set  
by the user.  
Chapter 12 - Calendar  
101  
 
       
Scheduling a Timed Appointment  
You can schedule timed appointments for the current  
date or for future dates.  
To schedule a timed appointment for the current date:  
1. Press the Calendar button  
the calendar to the current schedule.  
2. Tap New.  
on your phone to open  
3. Enter the Subject of the appointment or tap the drop  
down arrow and select a preset subject.  
4. Enter the Location if necessary.  
5. Tap the drop down arrow next to the Starts: and select  
the desired starting time of the appointment.  
6. Tap the drop down arrow next to the Ends: and select the  
desired ending time for the appointment.  
7. Select the type as either Normal or All Day.  
Note: If All Day is selected the time is automatically removed in the  
start and end times to indicate that there is no time limit.  
8. Tap the Occurs box and select the desired option  
9. Tap the Reminder box and select either None or  
Remind Me. If Remind Me was selected, enter the  
amount of time before you are reminded.  
10. Tap Categories and select either Business or Personal.  
When finished, tap  
.
11. Tap the Attendees box to invite others to the  
appointment from your contacts. Contacts must have an  
e-mail address to be added as an attendee.  
Chapter 12 - Calendar  
102  
 
 
12. Tap the Status box and select Free, Tentative, Busy, or  
Out of Office.  
13. Tap the Sensitivity box and select either Normal or  
Private.  
14. Tap  
to save the new appointment.  
Changing the Calendar View  
When you open the calendar, you can change the view  
to one of the following:  
Appointments - Displays a list of the current days  
appointments.  
Day - Displays the day with times and any appointments.  
Week - Displays the week.  
Month - Displays the month.  
Year - Displays the year.  
To change the view of the calendar:  
1. Press the Calendar button  
the calendar.  
on your phone to open  
2. Tap the row of calendar icons located on the bottom of  
the screen to switch to the desired view.  
Chapter 12 - Calendar  
103  
 
   
Calendar Options  
The calendar options allow you to configure:  
1st day of week - Allows you to select which day to begin the  
calendar.  
Week View - Allows you to select a five, six, or seven day  
week view.  
Show half hour slots - If this option is selected, half hour  
increments are displayed on the calendar.  
Show week numbers - If this option is selected, the week  
numbers are displayed in the calendar.  
Use large font - If this option is selected, a larger font is  
displayed on the calendar screen.  
Set reminders for new items - If this option is selected, an  
alert is automatically assigned to any new appointments or  
reminders that are entered into the calendar. The default  
amount of time is selected using the drop down arrow  
located underneath the option.  
Show icons - If this option is selected, icons are displayed on  
the calendar to indicate the various functions available.  
Send meeting requests via - Allows you to select the  
communication method in which to send a meeting request.  
To access the calendar options:  
1. Press the Calendar button  
the calendar.  
on your phone to open  
2. Tap Tools and select Options.  
Chapter 12 - Calendar  
104  
 
   
Tasks  
A task is something that needs to be done in a certain  
amount of time that requires a reminder to inform the  
user that the deadline has been reached. Once the task  
has been completed, it can be checked off and another  
task can be started. A task list can be set up to keep  
track of all the tasks that need to be done. They can be  
prioritized, so that higher priority items are finished first.  
Creating a new Task  
To create a new task:  
1. Tap Start located in the upper left corner of the screen  
and select Programs.  
2. Tap Tasks.  
3. Tap New.  
4. Enter a Subject. You can also tap the drop down arrow  
to select a default subject.  
5. Tap the Priority box and select:  
High  
Normal  
Low  
6. Tap the Status box and select Not Completed.  
7. Tap the Starts box and enter the starting date.  
8. Tap the Due box and enter the ending date.  
9. Tap the Occurs box and select how often the task  
occurs.  
Chapter 12 - Calendar  
105  
 
       
10. If you would like a reminder of when the task is due, tap  
the Reminder box and select Remind Me.  
11. Tap the Categories box and select Business or  
Personal. Tap  
.
12. Tap the Sensitivity box and select Normal or Private.  
13. Tap to save the task.  
When the task is saved, it is added to the task list. The  
task list allows you to sort the tasks based on priority  
level, subject, start date, due date, or status.  
Marking a Task Complete  
When a task is completed, a check is used to indicate  
the item is done.  
To mark a task complete:  
1. Tap Start located in the upper left corner of the screen  
and select Programs.  
2. Select Tasks.  
3. Locate the desired task from the list and tap the check  
box located to the left of the task entry.  
Task Options  
The following task options are available in the task list:  
Set reminders for new items - If this option is selected, an  
alert is automatically created when a new task is created.  
Show start and due date - If this option is selected, the start  
and due date is displayed in the task list.  
Chapter 12 - Calendar  
106  
 
       
Use large font - If this option is selected, a larger font is used  
on screen.  
To access the task options:  
1. Tap Start located in the upper left corner of the screen  
and select Programs.  
2. Select Tasks.  
3. Tap Tools and select Options.  
Task Entry Bar  
The task entry bar option automatically places a bar at  
the top of the screen to allow you to create a new task  
without navigating through the menu. You simply tap  
the bar and enter a name to create a new task. This  
option does not put in any start or end times. To enter  
any additional information you need to edit the task.  
Activating the Entry Bar  
To activate the task entry bar:  
1. Tap Start located in the upper left corner of the screen  
and select Programs.  
2. Select Tasks.  
3. Tap Tools and select Entry Bar.  
Editing a Task  
To edit a task:  
1. Tap Start located in the upper left corner of the screen  
and select Programs.  
Chapter 12 - Calendar  
107  
 
       
2. Select Tasks.  
3. Select the desired task from the task list.  
4. Tap Edit.  
5. When finished, tap  
to save and exit.  
Beaming a Task  
You can beam a task to another Pocket PC using the  
IR port. This operation requires that both users have  
the Pocket PC software. To beam a task:  
1. Tap Start located in the upper left corner of the screen  
and select Programs.  
2. Select Tasks.  
3. Select the desired task to beam.  
4. Tap Tools and select Beam Task.  
5. When the task is successfully transferred, tap Close.  
Adding a Note to a Task  
To add a recorded or written note to a task:  
1. Tap Start located in the upper left corner of the screen  
and select Programs.  
2. Select Tasks.  
3. Select the desired task from the task list.  
4. Tap Edit.  
5. Tap the Notes tab.  
6. When finished adding the note, tap  
to save and exit.  
Chapter 12 - Calendar  
108  
 
     
Deleting a Task  
When a task is competed, it can be deleted from the  
task list. To delete the task:  
1. Tap Start located in the upper left corner of the screen  
and select Programs.  
2. Select Tasks.  
3. Select the desired task from the task list.  
4. Tap Tools and select Delete Task.  
5. Tap Yes to confirm the deletion.  
Chapter 12 - Calendar  
109  
 
 
Chapter 12 - Calendar  
110  
 
Chapter 13 - Notes  
The following topics are discussed in this Chapter:  
Recording a New Note  
Writing a New Note  
Saving Notes  
 
 
Notes  
Quickly capture thoughts, reminders, ideas, drawings,  
and phone numbers with Notes. Notes can be attached  
to contacts, appointments, messages, and tasks. Notes  
can also be created in the Notes application. Notes can  
be either recorded or written.  
Recording a Note  
To record a note:  
1. Tap Start located in the upper left corner of the screen.  
2. Select Notes.  
3. Tap New.  
4. Tap the recording icon  
.
5. Tap  
6. Tap  
to begin recording.  
to stop recording.  
Note: To record quick note, press and hold  
located on the left  
the  
once, the Notes screen is  
side of the phone to begin recording. When you release  
recording will stop. If you press  
displayed.  
Recording During a Call  
During a call you can record yourself speaking to the  
caller to get directions or a phone number, without  
looking at the device. To record:  
1. Make a call to the desired person.  
Chapter 13 - Notes  
112  
 
           
2. During the conversation, press and hold  
recording.  
to begin  
3. When finished, release the  
4. End the call.  
to stop recording.  
Note: The call needs to be disconnected to listen to the recording. If  
the caller is still connected, there is no audio.  
5. To listen to the recording, tap the entry from the notes  
list.  
Recording a Personal Note  
When you are located in the Notes application, you can  
press and hold  
to record a personal memo. When  
you release the button, the recording stops and the  
new note is displayed in the notes list.  
Writing a new Note  
To write a new note:  
1. Tap Start located in the upper left corner of the screen.  
2. Select Notes.  
3. Tap New.  
4. Tap the writing icon  
.
5. Select the desired character input method by tapping the  
up arrow located in the right bottom corner.  
6. Enter the note and tap  
when finished.  
Chapter 13 - Notes  
113  
 
       
Deleting a Note  
To delete a note:  
1. Tap Start located in the upper left corner of the screen.  
2. Select Notes.  
3. Select the desired note from the list.  
4. Tap Tools and select Delete Note.  
5. Tap Yes to confirm the deletion.  
Note: You can also tap and hold the note in the notes list, then select  
Delete from the menu.  
Note Options  
The following options are available for Notes:  
Default Mode - This option allows you to select a default  
mode of Writing or Typing.  
Default Template - Allows you to select Blank Note,  
Meeting Notes, Memo, Phone Memo, or To Do as  
the default note.  
Save To - Allows you to select Main memory or a  
Storage card (if available) as the default note storage  
location.  
Record button action - This option allows you to configure  
what happens when the record button is tapped when  
creating a new note from any application. You can set the  
option to Switch to Notes or Stay in the current  
program.  
Chapter 13 - Notes  
114  
 
       
To access the notes options:  
1. Tap Start located in the upper left corner of the screen.  
2. Select Notes.  
3. Tap Tools and select Options.  
Chapter 13 - Notes  
115  
 
Chapter 13 - Notes  
116  
 
Chapter 14 - ActiveSync  
The following topics are discussed in this Chapter:  
ActiveSync Setup Options  
Creating a Partnership  
IR ActiveSync Options  
Scheduling ActiveSync  
 
 
ActiveSync  
Microsoft ActiveSync synchronizes data between a  
laptop.PC computer and the i700. The ActiveSync  
application is already installed on your i700, but is  
required to be installed on the desktop/laptop PC  
before any synchronization can occur.  
Installing the ActiveSync Software  
The following requirements are necessary before  
installing the ActiveSync software to the desktop/laptop  
PC:  
Microsoft Windows XP, Windows 2000, Windows  
Millennium Edition, Windows NT Workstation 4.0 with SP6  
or later, or Windows 98  
Microsoft Outlook 98 or later required for synchronization to  
the desktop or portable computer of e-mail, calendar,  
contacts, tasks, and notes. (Outlook 2002 recommended)  
Microsoft Internet Explorer 4.01 SP1 or later  
Hard-disk drive with 12 to 65 MB of available hard-disk  
space (actual requirements will vary based on selection of  
features and user's current system configuration)  
Infrared port or USB port (available for Windows 98,  
Windows Me, Windows 2000, and Windows XP only)  
One CD-ROM drive  
VGA graphics card or compatible video graphics adapter at  
256 color or later  
Keyboard  
Microsoft Mouse or compatible input device  
Chapter 14 - ActiveSync  
118  
 
         
To install to your desktop/laptop computer:  
1. Place the CD in the drive and wait for the Installation  
window to display.  
2. Click on Install ActiveSync and USB Drivers.  
3. Reboot your system when the installation is finished.  
Creating a New Partnership  
After you install ActiveSync and the USB drivers  
required for the i700 to connect properly, you need to  
create a new partnership. You can setup a standard or  
guest partnership.  
A Standard partnership is used to synchronize data  
between your device and the PC. The Guest  
partnership is used to simply transfer files between  
your device and the PC.  
To create a new partnership:  
1. If this is the first time your i700 is connected to the PC,  
the New Partnership screen is displayed when you  
launch the ActiveSync application.  
2. Select the desired partnership and click Next.  
3. Select how you want to synchronize data and click Next.  
4. Enter a unique name for your device (i700) and click  
Next.  
5. Select or deselect the desired applications that you want  
to synchronize and click Next.  
6. Click Finish.  
Chapter 14 - ActiveSync  
119  
 
   
The i700 and the PC should perform the first  
ActiveSync. This may take some time, depending on  
the amount of information that needs to be  
synchronized. When the process is complete,  
disconnect the data cable from the i700 and close  
ActiveSync.  
Performing ActiveSync using IR  
If you do not have your data cable and you need to  
perform a ActiveSync operation, you can use the IR  
port. To use the IR port to perform an ActiveSync:  
1. On the PC, launch the ActiveSync application.  
2. Click File and select Connection Settings.  
3. Click the check box next to Allow serial cable or  
infrared connection to this COM port.  
4. Click the drop down arrow and select Infrared Port (IR).  
5. Click OK to close the window.  
6. On the i700, tap Start located in the upper left corner of  
the screen.  
7. Tap ActiveSync.  
8. Tap Tools and select Connect via IR.  
9. Aim the two devices at each other.  
Chapter 14 - ActiveSync  
120  
 
   
Scheduling an ActiveSync  
You can also schedule the following ActiveSync  
options:  
When connected to my PC, synchronize with the server every  
5 min, 15 min, 30 min, 60 min, 2 hours, or 4 hours.  
When not connected to my PC, synchronize with the server  
every 5 min, 15 min, 30 min, 60 min, 2 hours, or 4 hours.  
When synchronizing remotely with my PC, disconnect when  
complete.  
These options are available on both the PC and i700.  
To access the scheduling options on the i700:  
1. Tap Start located in the upper left corner of the screen.  
2. Tap ActiveSync.  
3. Tap Tools and select Options.  
4. Tap the Schedule tab.  
Chapter 14 - ActiveSync  
121  
 
   
Chapter 14 - ActiveSync  
122  
 
Chapter 15 - Microsoft Pocket  
Applications  
The following topics are discussed in this Chapter:  
Using Pocket Word  
Using Pocket Excel  
 
 
Pocket Word  
Pocket Word works with Microsoft Word on your  
computer to give you easy access to copies of your  
documents. You can create new documents or copy  
documents from your computer to your i700.  
Synchronize the documents between your computer  
and your i700 to insure you have the most up-to-date  
content in both locations.  
Use Pocket Word to create documents, such as letters,  
meeting minutes, and trip reports.  
Creating a New Document  
To create a new file:  
1. Tap Start located in the upper left corner of the screen.  
2. Select Programs.  
3. Tap Pocket Word.  
4. Tap New.  
Note: If this is the first document being created, you will  
automatically be in a new document screen.  
5. Enter text using the desired character input method.  
6. When finished, tap  
to save and exit.  
Chapter 15 - Microsoft Pocket Applications  
124  
 
       
You can open one document at a time. If you try to  
open a second document, you are asked to save the  
first document. You can save a document in one of the  
following formats:  
Pocket Word (.psw)  
Word 97/2000 (.doc)  
Word 97/2000 (.dot)  
Rich Text Format (.rtf)  
Plain Text (.txt).  
Pocket Word Options  
The following options are available in Pocket Word:  
Default Template - Allows you to select Blank Document,  
Meeting Notes, Memo, Phone Memo, and To Do as  
the default document.  
Save To - Allows you to select Main memory or a  
Storage card (if available) as the default document  
storage location.  
Display in list view - Allows you to display Pocket Word  
only, Pocket Word & Text, and Known Types in the  
document list view.  
To access the Pocket Word options:  
1. Tap Start located in the upper left corner of the screen.  
2. Select Programs.  
3. Tap Pocket Word.  
4. Tap Tools and select Options.  
Chapter 15 - Microsoft Pocket Applications  
125  
 
   
Attaching a Recording  
You can attach a recording to a word document using  
the Record option. To attach a recording to an existing  
document:  
1. Tap Start located in the upper left corner of the screen.  
2. Select Programs.  
3. Tap Pocket Word.  
4. Select the desired document form the list.  
5. Tap View and select Recording.  
6. Tap  
7. When finished, tap  
8. Tap to save and exit.  
to start recording.  
.
Deleting a Document  
To delete a Pocket Word document:  
1. Tap Start located in the upper left corner of the screen.  
2. Select Programs.  
3. Tap Pocket Word.  
4. Select the desired document from the list.  
5. Tap Tools and select Delete Document.  
6. Tap Yes to confirm the deletion.  
Chapter 15 - Microsoft Pocket Applications  
126  
 
       
Beaming a Document  
To beam a document to another Pocket PC user:  
1. Tap Start located in the upper left corner of the screen.  
2. Select Programs.  
3. Tap Pocket Word.  
4. Select the desired document from the list.  
5. Tap Tools and select Beam Document.  
6. When the document is transferred, tap Close.  
7. Tap  
to exit the IR screen.  
Chapter 15 - Microsoft Pocket Applications  
127  
 
   
Pocket Excel  
Pocket Excel works with Microsoft Excel on your  
computer to give you easy access to copies of your  
workbooks. You can create new workbooks or copy  
workbooks from your computer to your i700.  
Synchronize workbooks between your computer and  
your i700 to insure that you have the most up-to-date  
content in both locations. Pocket Excel also provides  
fundamental spreadsheet tools, such as formulas,  
functions, sorting, and filtering.  
Use Pocket Excel to create workbooks, such as  
expense reports and mileage logs.  
Creating a new Workbook  
1. Tap Start located in the upper left corner of the screen.  
2. Select Programs.  
3. Tap Pocket Excel.  
4. Tap New.  
Note: If this is the first workbook being created, you will  
automatically be in a new workbook screen.  
5. Enter text using the desired character input method.  
6. When finished, tap  
to save and exit.  
You can open one workbook at a time. If you try to  
open a second, you are asked to save the first  
workbook.  
Chapter 15 - Microsoft Pocket Applications  
128  
 
       
Deleting a Workbook  
To delete a Pocket Excel document:  
1. Tap Start located in the upper left corner of the screen.  
2. Select Programs.  
3. Tap Pocket Excel.  
4. Select the desired workbook from the list.  
5. Tap Tools and select Delete Workbook.  
6. Tap Yes to confirm the deletion.  
Beaming a Workbook  
To beam a document to another Pocket PC user:  
1. Tap Start located in the upper left corner of the screen.  
2. Select Programs.  
3. Tap Pocket Excel.  
4. Select the desired workbook from the list.  
5. Tap Tools and select Beam Workbook.  
6. When the workbook is transferred, tap Close.  
7. Tap  
to exit the IR screen.  
Chapter 15 - Microsoft Pocket Applications  
129  
 
       
Chapter 15 - Microsoft Pocket Applications  
130  
 
Chapter 16 - Other Applications  
The following topics are discussed in this Chapter:  
Using File Explorer  
Microsoft Reader  
MSN Messenger  
Terminal Services Client  
Calculator  
Infrared Receive  
Games  
Find  
Help  
 
 
Program Application  
There are several applications that come with Pocket  
PC 2002. You can also download and install other  
desired applications as needed. The i700 contains  
60MB of memory to allow for continued expandability.  
The following applications are installed with Pocket PC  
2002:  
File Explorer  
Microsoft Reader  
MSN Messenger  
Terminal Services Client  
Games  
Calculator  
Infrared Receive  
Chapter 16 - Other Applications  
132  
 
   
File Explorer  
The file explorer application allows you to open an  
explorer window similar to a desktop Windows based  
system. The explorer window allows you to navigate  
through the i700 to locate desired folders and files.  
Launching the File Explorer  
To launch the file explorer:  
1. Tap Start located in the upper left corner of the screen.  
2. Select Programs.  
3. Tap File Explorer.  
Microsoft Reader  
Use Microsoft Reader to read or listen to electronic  
books. You can download books to your computer from  
your favorite eBook website. Use ActiveSync to copy  
the book files to your i700. The books are displayed in  
the Reader Library.  
Each book consists of a cover page, an optional table  
of contents, and the pages of the book. Page through  
the book by using the navigation key or tapping the  
page number on each page. You can annotate the  
book with highlighting, bookmarks, notes, and  
drawings. You can also search for text and look up  
definitions for words. The Reader Help book contains  
all the information you'll need to use the software. To  
open the Help book, tap Microsoft Reader Help from the  
Library list.  
Chapter 16 - Other Applications  
133  
 
       
To launch the Microsoft Reader application:  
1. Tap Start located in the upper left corner of the screen.  
2. Select Programs.  
3. Tap Microsoft Reader.  
MSN Messenger  
MSN Messenger on your i700 provides the same chat  
environment as MSN Messenger on your PC.  
These features include:  
Seeing who is online.  
Sending and receiving instant messages.  
Having an instant message conversation with a group of  
contacts.  
Telling contacts you are unavailable.  
Blocking contacts from seeing your status.  
To launch:  
1. Tap Start located in the upper left corner of the screen.  
2. Select Programs.  
3. Select MSN Messenger.  
Chapter 16 - Other Applications  
134  
 
   
Getting Started with MSN Messenger  
To use MSN Messenger, you need a Microsoft  
Passport account or an Exchange E-mail account.  
Once you have the required account, you need to:  
1. Set up a connection on your mobile device that allows  
you to connect to the internet.  
2. Set up an account in MSN Messenger.  
3. Sign in to MSN Messenger.  
Note: To setup a Hotmail account, go to http://www.hotmail.com.  
Terminal Services Client  
The Terminal Services Client enables you to log on to a  
desktop computer running terminal services or remote  
desktop and use all the applications on the computer  
from your mobile device. For more information, refer to  
the help file in the Pocket PC.  
Games  
Pocket PC Solitaire is installed in the Games folder. To  
open the solitaire game:  
1. Tap Start located in the upper left corner of the screen.  
2. Select Programs.  
3. Tap Games.  
4. Tap Solitaire.  
Chapter 16 - Other Applications  
135  
 
       
Calculator  
The calculator allows you to perform general  
mathematical functions, such as addition, subtraction,  
multiplication, and division.  
You can use the calculator to:  
Perform basic calculations.  
Store and retrieve values.  
Display the last series of calculations.  
To open the calculator:  
1. Tap Start located in the upper left corner of the screen.  
2. Select Programs.  
3. Tap Calculator.  
Using the Calculator  
The calculator includes several buttons to complete the  
mathematical calculations.  
CE - The “CE” button clears the last number you entered.  
Use this button if you make a mistake while entering a  
number in the middle of a calculation. This button enables  
you to re-enter the number without starting the calculation  
over.  
C - The “C” button clears the entire calculation and enables  
you to begin a fresh calculation.  
+/- - The “Plus/Minus” button toggles the current number  
between a negative and positive value. If you want to enter a  
Chapter 16 - Other Applications  
136  
 
   
negative number, enter the number first and then press the  
+/- button.  
M+ - The “M+” button places the current number in  
memory. Each new number you enter with the M+ button is  
added to the total stored in memory. The number that you  
add can be either a calculated value or any number you enter  
by pressing the number buttons. Pressing this button has  
no effect on the current calculation (or series of  
calculations); it merely places the value into memory until it  
is recalled.  
MR - The “MR” button recalls the stored value from memory  
and inserts it in the current calculation.  
MC - The “MC” button clears any value that is stored in the  
Calculator memory.  
Infrared Receive  
Infrared Receive or IR is used to receive files between  
two IR devices. In most cases, you can also receive  
files from your PC when it is equipped with an IR port.  
The two devices are aimed at each other approximately  
four inches apart.  
If you have difficulty getting the two devices to send or  
receive information, try the following:  
Transfer only one file at a time. No more than 25 contacts  
should be done at once.  
Make sure that the IR port windows are clear and free of any  
dirt or obstacles.  
Adjust the room lighting or move to another location. Some  
types of lighting may interfere with the transmission.  
Chapter 16 - Other Applications  
137  
 
   
Receiving a File  
To receive a file:  
1. Prepare a file from another IR device and initiate a send  
command.  
2. On the i700, tap Start located in the upper left corner of  
the screen.  
3. Select Programs.  
4. Tap Infrared Receive.  
5. Aim the two devices at each other and wait for  
confirmation that the file has been received.  
6. Tap Close.  
Find  
The find option allows you to search for the following:  
All Data  
Calendar  
Contacts  
Help  
Inbox  
Larger than 64 KB  
Notes  
Pocket Excel  
Pocket Outlook  
Pocket Word  
Tasks  
Chapter 16 - Other Applications  
138  
 
 
To access the find feature:  
1. Tap Start located in the upper left corner of the screen.  
2. Select Find.  
3. Enter the desired text in the Find: field or tap the drop  
down arrow to view past find entries.  
4. Tap the drop down arrow in the Type: field and select the  
desired option.  
5. Tap the Go button to display the results.  
Help  
Pocket PC 2002 has a built in help file that can be  
accessed to explain common questions regarding the  
operating system. To access the help file:  
1. Tap Start located in the upper left corner of the screen.  
2. Select Help.  
3. Select the desired topic from the help contents or tap  
Find at the bottom to enter a desired topic.  
Note: You can also access the help screen when you are in an  
application. While the application screen is displayed, tap Start and  
select Help. The help screen that corresponds to the open application  
will be displayed.  
Chapter 16 - Other Applications  
139  
 
 
Chapter 16 - Other Applications  
140  
 
Chapter 17 - Managing  
Applications  
The following topics are discussed in this Chapter:  
Installing New Applications  
Deleting Applications  
Memory Allocation  
 
 
Application Management  
Your i700 is running the Pocket PC 2002 operating  
system. This allows you to install or remove any Pocket  
PC 2002 compatible application on your device. Pocket  
PC applications can be downloaded from the web,  
purchased at retail outlets, or beamed from a friend  
using the IR feature.  
Installing New Applications  
Applications are installed using the ActiveSync  
application. When a new application is downloaded  
from the web or installed using a CD, the files are  
transferred to the mobile device via ActiveSync. When  
the ActiveSync is performed, the available memory is  
checked and then the files are copied. If there is not  
enough memory available, a warning message is  
displayed. To free up memory, simply remove old  
programs or delete older files.  
To install a new application:  
1. Insert the CD into the desktop/laptop PC.  
2. Run the Setup program.  
3. Connect the i700 data connector to accessory connector  
located on the bottom of the phone.  
4. Perform an ActiveSync operation.  
Chapter 17 - Managing Applications  
142  
 
       
Deleting an Application  
Some applications are large and take up space on your  
i700. To help manage space and memory requirements  
for other software that may need to be installed, you  
can delete any application not stored in ROM. ROM  
applications are those that were installed at the factory  
and are required for the device to operate correctly. To  
delete an application:  
1. Tap Start located in the upper left corner of the screen.  
2. Select Settings.  
3. Tap the System tab.  
4. Tap Remove Programs at the bottom of the screen.  
5. Select the program from the list and tap Remove.  
Memory Allocation  
Memory is managed automatically, but can be  
temporarily adjusted using the memory slider. Memory  
is allocated to storage and programs. Usually the  
amount given to each is divided into equal amounts. It  
may become necessary to adjust one or the other to  
install or use another application requiring higher  
memory usage. To temporarily modify the memory  
settings:  
1. Tap Start located in the upper left corner of the screen.  
2. Select Settings.  
3. Tap the System tab.  
4. Tap Memory.  
Chapter 17 - Managing Applications  
143  
 
       
5. Tap and hold the slider left or right to allocate the desired  
memory amounts.  
6. Tap  
to save and exit.  
Memory Card  
The memory card can be used to backup or save data  
to avoid accidental loss due to battery discharge or  
other unforseen device data complications. The  
memory storage card is inserted into the slot located on  
the side of the unit. Once installed, the storage card is  
displayed on the i700. When checking the memory  
allocation as outlined above, the storage card can be  
selected to get an accurate available memory setting.  
The Safestore option allows you to backup and protect  
data up to 5 MB using the backup utility.  
Chapter 17 - Managing Applications  
144  
 
Chapter 18 - Internet Explorer  
The following topics are discussed in this Chapter:  
Launching Internet Explorer  
Saving Favorites  
Internet Pass Through  
 
 
Pocket Internet Explorer  
You can use Internet Explorer to view web pages on  
your i700 in two different ways:  
By downloading pages and then performing a ActiveSync  
operation.  
By connecting to the Internet Directly.  
While browsing you can also download new files and  
programs. If you are using Microsoft Internet Explorer  
version 4 or later, your favorites can be synchronized to  
your i700.  
Launching Internet Explorer  
To launch Internet Explorer:  
1. Tap Start located in the upper left corner of the screen.  
2. Tap Internet Explorer.  
Note: Microsoft Pocket I.E does not support all browser functions  
supported by PC I.E, therefore, browser functions might not work in  
some internet sites.  
Saving Favorites  
When you find a web page that contains useful or  
interesting information, it can be saved as a favorite. To  
save a favorite:  
1. Tap Start located in the upper left corner of the screen.  
2. Tap Internet Explorer.  
3. Navigate to the desired website.  
Chapter 18 - Internet Explorer  
146  
 
           
4. Tap the yellow folder icon in the command bar.  
5. Tap the Add/Delete tab.  
6. Select the desired folder and tap Add.  
7. Tap Add again.  
8. Tap  
to save and exit.  
Internet Pass Through  
When the i700 is connected to your desktop/laptop  
machine, it can access the Internet using Internet pass  
through. If the desktop/laptop machine is connected to  
the internet, then the i700 can also be used to display  
online information using Pocket Internet Explorer. To  
access the Internet using the i700:  
1. Connect the i700 to your desktop/laptop machine and  
perform an ActiveSync operation.  
2. Tap Start located in the upper left corner of the screen.  
3. Tap Internet Explorer.  
Chapter 18 - Internet Explorer  
147  
 
 
Chapter 18 - Internet Explorer  
148  
 
Chapter 19 - Camera  
The following topics are discussed in this Chapter:  
Launching the Camera Application  
Camera Settings  
Sleep Mode  
Timer  
Still View Navigation  
Taking Pictures  
Zoom  
Voice Record  
Viewing Pictures  
Adaptive Sensitivity  
Beaming Pictures  
 
 
Camera  
The i700 comes with a built-in camera mounted on a  
swivel integrated into the upper left corner of the  
phone. To use the camera, simply use the thumb wheel  
on the side and rotate to the desired angle. When you  
take a picture, it is saved into the phone’s memory.  
Pictures can also be saved on the desktop/laptop PC  
using ActiveSync.  
Launching the Camera Application  
To launch the camera application:  
1. Tap Start located in the upper left corner of the screen.  
2. Tap Camera.  
The camera screen is displayed with a window  
reflecting an image of what is being captured by the  
lens.  
Taking a Picture  
1. Locate the desired picture using the swivel on the  
camera.  
2. Tap the big blue button to snap the picture.  
Chapter 19 - Camera  
150  
 
       
Camera Settings  
The following camera settings are available:  
Size - Allows you to select the desired image. The choices  
are 640x480, 320x240, and 160x120. The smaller the image  
size, the smaller the image file size.  
Quality - Allows you to select the quality of the image. The  
choices are Normal, Fine, and Best.  
Whitebalance - Allows you to select the white balance or how  
bright the image. The choices are Auto, Daylight, CoolWhite,  
Horizon, TL84, and Incandescent.  
Exposure - Allows you to select the exposure settings of the  
image. The choices are Brighter, Bright, Normal, Dark, and  
Darker.  
AS Mode - Enables the camera to acquire and display images  
with a wide range of illuminations. When you tap the capture  
button, a full image with clear visible details both in bright  
and dark areas of the photo is provided.  
Available Picture Counter - There is a counter located on the  
menu bar next to the time and date that displays the amount  
of available pictures. Each time a picture is taken, this  
number decreases.  
To open the camera settings:  
1. Tap Start located in the upper left corner of the screen.  
2. Tap Camera.  
3. Tap Settings.  
Chapter 19 - Camera  
151  
 
   
Sleep Mode  
The camera will automatically go to sleep and display a  
blank screen with a camera icon. To wake up the  
camera, tap anywhere on the screen.  
Timer  
The timer can be set to take pictures automatically after  
3, 6, 9, or 12 seconds. When the timer reaches zero, a  
picture is taken and saved into memory. To set the  
timer:  
1. Tap Start located in the upper left corner of the screen.  
2. Tap Camera.  
3. Tap the timer button located to the right of the picture  
button:  
Once for three seconds.  
Twice for six seconds.  
Three times for nine seconds.  
Four times for twelve seconds.  
4. When the desired amount of time is displayed, tap the  
picture button.  
5. The countdown begins and a series of tones are heard.  
6. A click is heard when the picture is taken.  
Chapter 19 - Camera  
152  
 
   
Viewing Pictures  
To view your pictures:  
1. Tap Start located in the upper left corner of the screen.  
2. Tap Camera.  
3. Tap View and select:  
View Image - Views the images one by one.  
View Thumbnails - Views the entire library using small  
thumbnail pictures.  
Still View Navigation  
When you are viewing images in still view, the following  
options are available:  
Actual Size dialog box - Display the image in a full screen  
format at regular size.  
Navigation Map - Allows you to navigate around the image  
displayed in full view when the image is too large for the  
screen.  
Goto Previous or Next Image - Allows you to move to the  
next or previous image saved in memory.  
Zoom - Allows you to zoom in or out.  
Voice Record - Allows you to record a voice memo and  
attach it to the image.  
Details Information - Displays the details of the image and  
where it was saved.  
Chapter 19 - Camera  
153  
 
     
Actual Size Dialog Box  
The actual size dialog box allows you to view the  
captured image on screen at the size it was taken. The  
navigation screen is automatically displayed in the  
lower right corner of the screen. A small red box  
illustrates the viewable portion of the image. You can  
move the box by sliding it around to display the other  
portions of the image. To view the image in actual size:  
1. Tap Start located in the upper left corner of the screen.  
2. Tap Camera.  
3. Tap View and select View Image.  
4. Tap  
.
5. Tap the red box and drag to view the other portions of  
the image.  
Goto Previous or Next Image  
1. Tap Start located in the upper left corner of the screen.  
2. Tap Camera.  
3. Tap View and select View Image.  
4. Tap  
.
5. Tap the left or right arrow in the lower left corner of the  
screen.  
Chapter 19 - Camera  
154  
 
Zoom  
1. Tap Start located in the upper left corner of the screen.  
2. Tap Camera.  
3. Tap View and select View Image.  
4. Tap  
.
5. Tap the plus magnifying glass icon to zoom in or tap the  
minus magnifying icon to zoom out.  
Voice Record  
1. Tap Start located in the upper left corner of the screen.  
2. Tap Camera.  
3. Tap View and select View Image.  
4. Tap  
box.  
to display the Voice Memo recording dialog  
5. Tap  
to begin recording.  
6. When finished, tap  
.
7. To listen to the memo, tap  
.
8. Close the voice memo recording dialog box to save the  
attachment to the image.  
Note: A speaker icon is now displayed in the lower right corner of the  
image to indicate that a voice memo has been attached to the image.  
Chapter 19 - Camera  
155  
 
Text Memo  
You can also attach a text memo to the image. To  
attach a text memo:  
1. Tap Start located in the upper left corner of the screen.  
2. Tap Camera.  
3. Tap View and select View Image.  
4. Select the desired image and tap  
.
5. Tap the Memo tab.  
6. Tap the area under Text Memo and enter the memo  
using the desired input method.  
7. When finished, tap  
to save and exit.  
Details Information  
The details information displays the following  
information about the image:  
File Name  
Folder Path  
File Size  
Image Format  
Image Resolution  
Date Modified  
To display the information for an image:  
1. Tap Start located in the upper left corner of the screen.  
2. Tap Camera.  
3. Tap View and select View Image.  
Chapter 19 - Camera  
156  
 
4. Select the desired image and tap  
.
5. Tap the Information tab.  
6. Tap  
to exit.  
Thumbnail View  
When you are viewing images in thumbnail view, the  
following options are available:  
Capture  
View Image  
Slideshow  
Rename/Move  
Delete  
Tools  
Capture  
When you are viewing the thumbnails, you can return  
to the camera screen by using the capture command.  
To access the capture command:  
1. Tap Start located in the upper left corner of the screen.  
2. Tap Camera.  
3. Tap View and select View Thumbnails.  
4. When you are finished viewing the thumbnails, tap View  
and select Capture to return to the camera.  
Chapter 19 - Camera  
157  
 
 
View Image  
To view the image on screen from the thumbnail:  
1. Tap Start located in the upper left corner of the screen.  
2. Tap Camera.  
3. Tap View and select View Thumbnails.  
4. Press the navigation key left or right to select the desired  
thumbnail.  
5. Tap View and select View Image.  
Note: You can also tap the thumbnail to view it on screen.  
Slideshow  
To view a slide show of all the images that are stored in  
memory:  
1. Tap Start located in the upper left corner of the screen.  
2. Tap Camera.  
3. Tap View and select View Thumbnails.  
4. Press the navigation key left or right to select the first  
image.  
Note: The slideshow displays the images in a sequential order. If the  
image is that last one in the list, it will be the only one displayed.  
5. Tap View and select Slideshow.  
Chapter 19 - Camera  
158  
 
Rename/Move  
The rename/move command allows you to rename the  
image and move it to a different folder. To rename/  
move:  
1. Tap Start located in the upper left corner of the screen.  
2. Tap Camera.  
3. Tap View and select View Thumbnails.  
4. Tap Edit and select Rename/Move.  
5. Enter the new name and folder using the desired input  
method. When finished, tap  
to save and exit.  
Deleting a Thumbnail  
To delete a thumbnail:  
1. Tap Start located in the upper left corner of the screen.  
2. Tap Camera.  
3. Tap View and select View Thumbnails.  
4. Tap Edit and select Delete.  
5. Tap Yes to confirm the deletion.  
Tools  
The tools menu allows you to:  
Send an image using email or IR  
Sort Type  
Sort Order  
Refresh Thumbnails  
Change Folder  
Chapter 19 - Camera  
159  
 
Sending an Image  
Images can be beamed to another Pocket PC user  
using the built-in IR port. Images can also be sent by  
attachment using the email function. To access the  
send menu:  
1. Tap Start located in the upper left corner of the screen.  
2. Tap Camera.  
3. Tap View and select View Thumbnails.  
4. Tap Tools and select Send.  
Sort Type  
Images can be sorted by name or date using the sort  
type feature. To access sort type:  
1. Tap Start located in the upper left corner of the screen.  
2. Tap Camera.  
3. Tap View and select View Thumbnails.  
4. Tap Tools and select Sort Type.  
Sort Order  
Images can be sorted either ascending or descending  
by using the sort order feature. To access sort order:  
1. Tap Start located in the upper left corner of the screen.  
2. Tap Camera.  
3. Tap View and select View Thumbnails.  
4. Tap Tools and select Sort Order.  
Chapter 19 - Camera  
160  
 
Refresh Thumbnails  
To refresh the thumbnail screen:  
1. Tap Start located in the upper left corner of the screen.  
2. Tap Camera.  
3. Tap View and select View Thumbnails.  
4. Tap Tools and select Refresh Thumb.  
Change Folder  
To change the folder where the thumbnail images are  
saved:  
1. Tap Start located in the upper left corner of the screen.  
2. Tap Camera.  
3. Tap View and select View Thumbnails.  
4. Tap Tools and select Change Folder.  
5. Browse to the desired new folder or create a new one.  
6. When finished, tap  
to save and exit.  
Adaptive Sensitivity (AS Mode)  
The Adaptive Sensitivity technology enables the  
camera to acquire and display images with wide range  
of illuminations, of more than 60 dB. When a picture is  
taken, a full image with clear details in light and dark  
areas is displayed.  
The image is obtained by utilizing two images: one with  
a short exposure time and the other with a long  
exposure time. Each image captures the light and dark  
Chapter 19 - Camera  
161  
 
 
sections of the scene. Adaptive Sensitivity combines  
the two images into a one dynamic image and reduces  
the image to a normal size to display on the screen  
without loosing any details.  
Activating AS Mode  
To turn on the AS mode:  
1. Tap Start located in the upper left corner of the screen.  
2. Tap Camera.  
3. Tap Settings and select AS Mode.  
AS Mode Icons  
When AS Mode is enabled, an icon is displayed in the  
upper left corner of the screen. This icon represents the  
image conditions.  
Icon  
Description  
AS Mode OK - Good light conditions. This option  
is only active in AS mode.  
AS Low Light - A low light condition was  
detected. The camera cannot increase the  
exposure due to the low light. This option is only  
active in AS mode.  
AS Motion Detected - High motion was detected.  
The captured image will be in normal mode. This  
option is always active.  
Chapter 19 - Camera  
162  
 
Beaming Pictures  
To beam pictures:  
1. Tap Start located in the upper left corner of the screen.  
2. Tap Camera.  
3. Tap View and select View Image.  
4. Select the desired image by tapping the navigation  
arrows left or right.  
5. Tap Send and select Beam Files.  
6. Tap Close when finished.  
Continuous Picture Mode  
The continuous picture mode allows you to set the  
digital camera to take three pictures in a row very  
quickly when you tap the blue button. To turn on  
continuous picture mode:  
1. Tap the continuous picture mode icon located next to  
Help in the menu bar.  
2. Notice that the number “3” is placed next to the camera  
icon under the view screen on the right side.  
3. Tap the blue button to take your pictures.  
Chapter 19 - Camera  
163  
 
     
Chapter 19 - Camera  
164  
 
Chapter 20 - Windows Media  
Player  
The following topics are discussed in this Chapter:  
Launching the Media Player  
Media Player Controls  
Opening Media Files  
Creating a Playlist  
 
 
Media Player  
You can use the Microsoft Windows Media Player for  
Pocket PC to play digital audio and video files that are  
stored on your device or downloaded from the web.  
You can play files in either Windows Media or MP3  
format, including files with extensions .asf, .wma, .wmv,  
and .mp3.  
Launching the Media Player  
To launch the Media Player:  
1. Tap Start located in the upper left corner of the screen.  
2. Tap Windows Media.  
Media Player Controls  
The following settings are available in the Media Player:  
- Tap this icon to play a file.  
- Pauses the file  
- Stops the file.  
- Skips to the beginning of the file or to the previous file.  
- Skips to the next file.  
- Adjusts the playback progress of the selected file.  
- Adjusts the volume levels.  
- Displays a video using the entire screen.  
Chapter 20 - Windows Media Player  
166  
 
         
- Displays the WindowsMedia.com web page.  
Loading Media Player Files  
Media player files must be copied to the i700 using the  
ActiveSync application. The files are copied to the  
Local Content folder on the i700 after the ActiveSync  
operation. To load a file:  
1. Tap Start located in the upper left corner of the screen.  
2. Tap Windows Media.  
3. Tap Select.  
4. Select the desired file from the list and tap  
.
5. Tap  
to play the file.  
Playlist  
The Windows Media player allows you to configure  
personal playlists with your favorite music or video files.  
Playlists group media content and store the location of  
media content, whether the location is your computer, a  
network, or the Internet. Playlists typically have an .asx  
or .m3u file extension.  
To create a new playlist:  
1. Launch the Windows Media Player application.  
2. Tap Select.  
3. Tap the drop down arrow next to Local Content and  
select Organize Playlists.  
4. Tap New.  
Chapter 20 - Windows Media Player  
167  
 
     
5. Enter a name for the playlist and tap  
.
6. Tap the Plus sign at the bottom of the screen to open a  
browse window.  
7. Tap the check box next to each supported media file to  
add it to the new playlist. Tap  
when finished.  
Chapter 20 - Windows Media Player  
168  
 
Chapter 21 - Troubleshooting,  
Safety, and Warranty  
The following topics are discussed in this Chapter:  
Troubleshooting  
Safety Information  
Warranty  
 
 
Troubleshooting  
Before contacting Customer Service, try the following:  
Make sure that the battery is properly attached to your  
phone.  
Make sure that the battery is fully charged.  
Make sure that there is no visible physical damage to your  
phone or battery.  
Make sure that the cradle/charger is plugged in to a working  
receptacle.  
Perform a soft or hard reset using the stylus or a paper clip  
to press the reset button located on the back lower right  
corner of your phone. For more information on resetting  
If you are using Windows 2000 or XP, make sure you have  
the proper user rights. You must have Standard User rights  
to install the i700 software.  
Resetting Your Handheld  
Under normal circumstances, you will not have to use  
the reset button. On rare occasions, however your  
handheld may no longer respond to buttons or the  
screen. In this case, you need to perform a reset to get  
your handheld running again.  
Performing a Soft Reset  
A soft reset interrupts the processing on your handheld.  
All records and entries stored in your handheld  
computer are retained with a soft reset. After a soft  
reset, the main phone screen is displayed.  
Chapter 21 - Troubleshooting, Safety, and Warranty  
170  
 
         
To perform a Soft Reset:  
Un-screw the stylus, or use the tip of an unfolded paper clip  
(or similar object without a sharp tip), to gently press the  
reset button inside the hole on the back lower right corner of  
your phone.  
Performing a Hard Reset  
A hard reset erases all records and entries stored in  
your handheld. Never perform a hard reset unless a  
soft reset does not solve the problem. To restore your  
data after a hard reset, you must perform an  
ActiveSync operation.  
Note: You can restore any data previously synchronized with your  
computer during the next ActiveSync operation.  
Note: With a hard reset, the current date and time are retained.  
Formats, Preferences, and other settings are restored to their original  
factory default settings.  
To perform a Hard Reset:  
To perform a hard reset, press and hold the Handheld Power  
button  
, then press the reset button. Remove the stylus  
or paperclip from the reset hole, then release the handheld  
power button. A “Tap the screen to set up your Pocket PC”  
screen is displayed confirming the hard reset. Tap the  
screen to begin the set up process and follow the on-screen  
instructions.  
Note: Data saved in Safestore memory does not get deleted, even if a  
hard reset is performed.  
Chapter 21 - Troubleshooting, Safety, and Warranty  
171  
 
 
Safety Information  
Battery Precautions  
Your phone is powered by a rechargeable Li-polymer  
standard battery. The read the following cautions  
concerning the battery:  
Never use any charger or battery that is damaged in any way.  
Use the battery only for its intended purpose.  
If your phone has a strong signal, it uses less power; talk and  
standby time are greatly affected by the signal strength on  
the cellular network and the parameters set by the network  
operator.  
Battery charging time depends on the remaining battery  
charge and the type of battery and charger used. The battery  
can be charged and discharged hundreds of times, but it will  
gradually wear out. When the operation time, including talk  
time and standby time, is noticeably shorter than normal, it  
is time to purchase a new battery.  
If left unused, a fully charged battery will discharge itself  
over time.  
Use only Samsung-approved batteries and chargers. When a  
charger is not in use, disconnect it from the power source.  
Do not leave the battery connected to a charger for more  
than a 7 days, since overcharging may shorten its life.  
Extreme temperatures will affect the charging capacity of  
your battery. The battery may require cooling or warming  
before charging.  
Do not leave the battery in hot or cold places, such as in a  
car. It will reduce the capacity and life-time of the battery.  
Chapter 21 - Troubleshooting, Safety, and Warranty  
172  
 
 
Always try to keep the battery at room temperature. A phone  
with a hot or cold battery may not work correctly, even if the  
battery is fully charged. Li-Polymer batteries are sensitive to  
temperatures below 0 °C (32 °F).  
Do not short-circuit the battery. Accidental short circuiting  
can occur when a metallic object (coin, clip, or pen) causes  
a direct connection between the positive and negative  
terminals of the battery.  
Dispose of used batteries in accordance with local  
regulations. Always recycle. Do not dispose of batteries in a  
fire.  
Road Safety  
Your wireless phone gives you the powerful ability to  
communicate by voice, almost anywhere, anytime. But  
an important responsibility accompanies the benefits of  
wireless phones, one that every user must uphold.  
When driving a car, driving is your first responsibility.  
When using your wireless phone behind the wheel of a  
car, practice good common sense and remember the  
following tips:  
1. Get to know your wireless phone and its features, such  
as speed dial and redial. If available, these features help  
you to place your call without taking your attention off the  
road.  
2. When available, use a hands-free device. If possible,  
add an extra layer of convenience and safety to your  
wireless phone with one of the many hands-free  
accessories available today.  
Chapter 21 - Troubleshooting, Safety, and Warranty  
173  
 
3. Position your wireless phone within easy reach. Be able  
to access your wireless phone without removing your  
eyes from the road. If you get an incoming call at an  
inconvenient time, let your voice mail answer it for you.  
4. Let the person you are speaking with know you are  
driving; if necessary, suspend the call in heavy traffic or  
hazardous weather conditions. Rain, sleet, snow, ice and  
even heavy traffic can be hazardous.  
5. Do not take notes or look up phone numbers while  
driving. Jotting down a To Do list or flipping through your  
phonebook takes your attention away from your primary  
responsibility, driving safely.  
6. Dial sensibly and assess the traffic; if possible, place  
calls when you are not moving or before pulling into  
traffic. Try to plan calls when your car will be stationary. If  
you need to make a call while moving, dial only a few  
numbers, check the road and your mirrors, then  
continue.  
7. Do not engage in stressful or emotional conversations  
that may be distracting. Make the people with whom you  
are talking aware that you are driving and suspend  
conversations that have the potential to divert your  
attention from the road.  
8. Use your wireless phone to call for help. Dial the  
emergency number in the case of fire, traffic accident or  
medical emergencies. Remember, it is a free call on your  
wireless phone!  
9. Use your wireless phone to help others in emergencies.  
If you see a car accident, crime in progress or other  
Chapter 21 - Troubleshooting, Safety, and Warranty  
174  
 
serious emergency where lives are in danger, call the  
emergency number, as you would want others to do for  
you.  
10. Call roadside assistance or a special non emergency  
wireless assistance number when necessary. If you see  
a broken-down vehicle posing no serious hazard, a  
broken traffic signal, a minor traffic accident where no  
one appears injured, or a vehicle you know to be stolen,  
call roadside assistance or any other special non-  
emergency wireless number.  
Operating Environment  
Remember to follow any special regulations in force in  
any area and always switch off your phone whenever it  
is forbidden to use it, or when it may cause interference  
or danger. When connecting the phone or any  
accessory to another device, read its user’s guide for  
detailed safety instructions. Do not connect  
incompatible products. As with other mobile radio  
transmitting equipment, users are advised that for the  
satisfactory operation of the equipment and for the  
safety of personnel, it is recommended that the  
equipment should only be used in the normal operating  
position (held to your ear with the antenna pointing over  
your shoulder).  
Electronic Devices  
Most modern electronic equipment is shielded from  
radio frequency (RF) signals. However, certain  
electronic equipment may not be shielded against the  
Chapter 21 - Troubleshooting, Safety, and Warranty  
175  
 
RF signals from your wireless phone. Consult the  
manufacturer to discuss alternatives.  
Pacemakers  
Pacemaker manufacturers recommend that a minimum  
distance of 15 cm (6 inches) be maintained between a  
wireless phone and a pacemaker to avoid potential  
interference with the pacemaker. These  
recommendations are consistent with the independent  
research and recommendations of Wireless  
Technology Research.  
Persons with pacemakers:  
Should always keep the phone more than 15 cm (6 inches)  
from their pacemaker when the phone is switched on;  
Should not carry the phone in a breast pocket;  
Should use the ear opposite the pacemaker to minimize  
potential interference.  
If you have any reason to suspect that interference is  
taking place, switch off your phone immediately.  
Hearing Aids  
Some digital wireless phones may interfere with some  
hearing aids. In the event of such interference, you may  
wish to consult your hearing aid manufacturer to  
discuss alternatives.  
Other Medical Devices  
If you use any other personal medical devices, consult  
the manufacturer of your device to determine if it is  
Chapter 21 - Troubleshooting, Safety, and Warranty  
176  
 
adequately shielded from external RF energy. Your  
physician may be able to assist you in obtaining this  
information. Switch off your phone in health care  
facilities when any regulations posted in these areas  
instruct you to do so. Hospitals or health care facilities  
may be using equipment that could be sensitive to  
external RF energy.  
Vehicles  
RF signals may affect improperly installed or  
inadequately shielded electronic systems in motor  
vehicles. Check with the manufacturer or its  
representative regarding your vehicle. You should also  
consult the manufacturer of any equipment that has  
been added to your vehicle.  
Posted Facilities  
Switch off your phone in any facility where posted  
notices require you to do so.  
Potentially Explosive Atmospheres  
Switch off your phone when in any area with a  
potentially explosive atmosphere and obey all signs  
and instructions. Sparks in such areas could cause an  
explosion or fire resulting in bodily injury or even death.  
Users are advised to switch off the phone while at a  
refuelling point (service station). Users are reminded of  
the need to observe restrictions on the use of radio  
equipment in fuel depots (fuel storage and distribution  
areas), chemical plants or where blasting operations  
are in progress. Areas with a potentially explosive  
Chapter 21 - Troubleshooting, Safety, and Warranty  
177  
 
atmosphere are often but not always clearly marked.  
They include below deck on boats, chemical transfer or  
storage facilities, vehicles using liquefied petroleum  
gas (such as propane or butane), areas where the air  
contains chemicals or particles, such as grain, dust or  
metal powders, and any other area where you would  
normally be advised to turn off your vehicle engine.  
Emergency Calls  
This phone, like any wireless phone, operates using  
radio signals, wireless and land line networks as well  
as user-programmed functions, which cannot  
guarantee connection in all conditions. Therefore, you  
should never rely solely on any wireless phone for  
essential communications (medical emergencies, for  
example).  
Remember, to make or receive any calls the phone  
must be switched on and in a service area with  
adequate signal strength. Emergency calls may not be  
possible on all wireless phone networks or when  
certain network services and/or phone features are in  
use. Check with local service providers. If certain  
features are in use (call barring, for example), you may  
first need to deactivate those features before you can  
make an emergency call. Consult this document and  
your local cellular service provider. When making an  
emergency call, remember to give all the necessary  
information as accurately as possible. Remember that  
your phone may be the only means of communication  
Chapter 21 - Troubleshooting, Safety, and Warranty  
178  
 
at the scene of an accident; do not cut off the call until  
given permission to do so.  
Other Important Safety Information  
Only qualified personnel should service the phone or install  
the phone in a vehicle. Faulty installation or service may be  
dangerous and may invalidate any warranty applicable to the  
device.  
Check regularly that all wireless phone equipment in your  
vehicle is mounted and operating properly.  
Do not store or carry flammable liquids, gases or explosive  
materials in the same compartment as the phone, its parts  
or accessories.  
For vehicles equipped with an air bag, remember that an air  
bag inflates with great force. Do not place objects, including  
both installed or portable wireless equipment in the area  
over the air bag or in the air bag deployment area. If wireless  
equipment is improperly installed and the air bag inflates,  
serious injury could result.  
Switch off your phone before boarding an aircraft. The use of  
wireless phones in aircraft may be dangerous to the  
operation of the aircraft, and is illegal.  
Failure to observe these instructions may lead to the  
suspension or denial of telephone services to the offender,  
or legal action, or both.  
Care and Maintenance  
Your phone is a product of superior design and  
craftsmanship and should be treated with care. The  
suggestions below will help you fulfill any warranty  
Chapter 21 - Troubleshooting, Safety, and Warranty  
179  
 
obligations and allow you to enjoy this product for many  
years.  
Keep the phone and all its parts and accessories out of the  
reach of small children’s.  
Keep the phone dry. Precipitation, humidity and liquids  
contain minerals that will corrode electronic circuits.  
Do not use or store the phone in dusty, dirty areas, as its  
moving parts may be damaged.  
Do not store the phone in hot areas. High temperatures can  
shorten the life of electronic devices, damage batteries, and  
warp or melt certain plastics.  
Do not store the phone in cold areas. When the phone warms  
up to its normal operating temperature, moisture can form  
inside the phone, which may damage the phone’s electronic  
circuit boards.  
Do not drop, knock or shake the phone. Rough handling can  
break internal circuit boards.  
Do not use harsh chemicals, cleaning solvents or strong  
detergents to clean the phone. Wipe it with a soft cloth  
slightly dampened in a mild soap-and water solution.  
Chapter 21 - Troubleshooting, Safety, and Warranty  
180  
 
Warranty  
STANDARD LIMITED WARRANTY  
What is Covered and For How Long?  
SAMSUNG TELECOMMUNICATIONS AMERICA, L.P.  
("SAMSUNG") warrants to the original purchaser  
("Purchaser") that SAMSUNG's Phones and  
accessories ("Products") are free from defects in  
material and workmanship under normal use and  
service for the period commencing upon the date of  
purchase and continuing for the following specified  
period of time after that date:  
Phone  
1 Year  
Batteries  
1 Year  
Leather Case/Pouch  
Holster  
90 Days  
90 Days  
Other Phone Accessories 1 Year  
What is Not Covered?  
This Limited Warranty is conditioned upon proper use  
of Product by Purchaser. This Limited Warranty does  
not cover: (a) defects or damage resulting from  
accident, misuse, abuse, neglect, unusual physical,  
electrical or electromechanical stress, or modification  
of any part of Product, including antenna, or cosmetic  
damage; (b) equipment that has the serial number  
removed or made illegible; (c) any plastic surfaces or  
other externally exposed parts that are scratched or  
Chapter 21 - Troubleshooting, Safety, and Warranty  
181  
 
     
damaged due to normal use; (d) malfunctions resulting  
from the use of Product in conjunction with  
accessories, products, or ancillary/peripheral  
equipment not furnished or approved by SAMSUNG;  
(e) defects or damage from improper testing, operation,  
maintenance, installation, or adjustment; (f) installation,  
maintenance, and service of Product, or (g) Product  
used or purchased outside the United States or  
Canada. This Limited Warranty covers batteries only if  
battery capacity falls below 80% of rated capacity or  
the battery leaks, and this Limited Warranty does not  
cover any battery if (i) the battery has been charged by  
a battery charger not specified or approved by  
SAMSUNG for charging the battery, (ii) any of the seals  
on the battery are broken or show evidence of  
tampering, or (iii) the battery has been used in  
equipment other than the SAMSUNG phone for which it  
is specified.  
What are SAMSUNG's Obligations?  
During the applicable warranty period, SAMSUNG will  
repair or replace, at SAMSUNG's sole option, without  
charge to Purchaser, any defective component part of  
Product. To obtain service under this Limited Warranty,  
Purchaser must return Product to an authorized phone  
service facility in an adequate container for shipping,  
accompanied by Purchaser's sales receipt or  
comparable substitute proof of sale showing the date of  
purchase, the serial number of Product and the sellers'  
name and address. To obtain assistance on where to  
deliver the Product, call Samsung Customer Care at 1-  
Chapter 21 - Troubleshooting, Safety, and Warranty  
182  
 
888-987-4357. Upon receipt, SAMSUNG will promptly  
repair or replace the defective Product. SAMSUNG  
may, at SAMSUNG's sole option, use rebuilt,  
reconditioned, or new parts or components when  
repairing any Product or replace Product with a rebuilt,  
reconditioned or new Product. Repaired/replaced  
leather cases, pouches and holsters will be warranted  
for a period of ninety (90) days. All other repaired/  
replaced Product will be warranted for a period equal to  
the remainder of the original Limited Warranty on the  
original Product or for 90 days, whichever is longer. All  
replaced parts, components, boards and equipment  
shall become the property of SAMSUNG. If SAMSUNG  
determines that any Product is not covered by this  
Limited Warranty, Purchaser must pay all parts,  
shipping, and labor charges for the repair or return of  
such Product.  
What Are the Limits On SAMSUNG's Liability?  
EXCEPT AS SET FORTH IN THE EXPRESS  
WARRANTY CONTAINED HEREIN, PURCHASER  
TAKES THE PRODUCT "AS IS," AND SAMSUNG  
MAKES NO WARRANTY OR REPRESENTATION  
AND THERE ARE NO CONDITIONS, EXPRESS OR  
IMPLIED, STATUTORY OR OTHERWISE, OF ANY  
KIND WHATSOEVER WITH RESPECT TO THE  
PRODUCT, INCLUDING BUT NOT LIMITED TO:  
·THE MERCHANTABILITY OF THE PRODUCT OR  
ITS FITNESS FOR ANY PARTICULAR PURPOSE OR  
USE;  
Chapter 21 - Troubleshooting, Safety, and Warranty  
183  
 
·WARRANTIES OF TITLE OR NON-INFRINGEMENT;  
·DESIGN, CONDITION, QUALITY, OR  
PERFORMANCE OF THE PRODUCT;  
·THE WORKMANSHIP OF THE PRODUCT OR THE  
COMPONENTS CONTAINED THEREIN; OR  
·COMPLIANCE OF THE PRODUCT WITH THE  
REQUIREMENTS OF ANY LAW, RULE,  
SPECIFICATION OR CONTRACT PERTAINING  
THERETO.  
NOTHING CONTAINED IN THE INSTRUCTION  
MANUAL SHALL BE CONSTRUED TO CREATE AN  
EXPRESS WARRANTY OF ANY KIND  
WHATSOEVER WITH RESPECT TO THE PRODUCT.  
ALL IMPLIED WARRANTIES AND CONDITIONS  
THAT MAY ARISE BY OPERATION OF LAW,  
INCLUDING IF APPLICABLE THE IMPLIED  
WARRANTIES OF MERCHANTABILITY AND  
FITNESS FOR A PARTICULAR PURPOSE, ARE  
HEREBY LIMITED TO THE SAME DURATION OF  
TIME AS THE EXPRESS WRITTEN WARRANTY  
STATED HEREIN. SOME STATES/PROVINCES DO  
NOT ALLOW LIMITATIONS ON HOW LONG AN  
IMPLIED WARRANTY LASTS, SO THE ABOVE  
LIMITATION MAY NOT APPLY TO YOU. IN  
ADDITION, SAMSUNG SHALL NOT BE LIABLE FOR  
ANY DAMAGES OF ANY KIND RESULTING FROM  
THE PURCHASE, USE, OR MISUSE OF, OR  
INABILITY TO USE THE PRODUCT OR ARISING  
DIRECTLY OR INDIRECTLY FROM THE USE OR  
Chapter 21 - Troubleshooting, Safety, and Warranty  
184  
 
LOSS OF USE OF THE PRODUCT OR FROM THE  
BREACH OF THE EXPRESS WARRANTY,  
INCLUDING INCIDENTAL, SPECIAL,  
CONSEQUENTIAL OR SIMILAR DAMAGES, OR  
LOSS OF ANTICIPATED PROFITS OR BENEFITS,  
OR FOR DAMAGES ARISING FROM ANY TORT  
(INCLUDING NEGLIGENCE OR GROSS  
NEGLIGENCE) OR FAULT COMMITTED BY  
SAMSUNG, ITS AGENTS OR EMPLOYEES, OR FOR  
ANY BREACH OF CONTRACT OR FOR ANY CLAIM  
BROUGHT AGAINST PURCHASER BY ANY OTHER  
PARTY. SOME STATES/PROVINCES DO NOT  
ALLOW THE EXCLUSION OR LIMITATION OF  
INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO  
THE ABOVE LIMITATION OR EXCLUSION MAY NOT  
APPLY TO YOU.  
THIS WARRANTY GIVES YOU SPECIFIC LEGAL  
RIGHTS, AND YOU MAY ALSO HAVE OTHER  
RIGHTS, WHICH VARY FROM STATE TO STATE/  
PROVINCE TO PROVINCE. THIS LIMITED  
WARRANTY SHALL NOT EXTEND TO ANYONE  
OTHER THAN THE ORIGINAL PURCHASER OF  
THIS PRODUCT AND STATES PURCHASER'S  
EXCLUSIVE REMEDY. IF ANY PORTION OF THIS  
LIMITED WARRANTY IS HELD ILLEGAL OR  
UNENFORCEABLE BY REASON OF ANY LAW,  
SUCH PARTIAL ILLEGALITY OR  
UNENFORCEABILITY SHALL NOT AFFECT THE  
ENFORCEABILITY FOR THE REMAINDER OF THIS  
LIMITED WARRANTY WHICH PURCHASER  
Chapter 21 - Troubleshooting, Safety, and Warranty  
185  
 
ACKNOWLEDGES IS AND WILL ALWAYS BE  
CONSTRUED TO BE LIMITED BY ITS TERMS OR AS  
LIMITED AS THE LAW PERMITS.  
THE PARTIES UNDERSTAND THAT THE  
PURCHASER MAY USE THIRD-PARTY SOFTWARE  
OR EQUIPMENT IN CONJUNCTION WITH THE  
PRODUCT. SAMSUNG MAKES NO WARRANTIES  
OR REPRESENTATIONS AND THERE ARE NO  
CONDITIONS, EXPRESS OR IMPLIED, STATUTORY  
OR OTHERWISE, AS TO THE QUALITY,  
CAPABILITIES, OPERATIONS, PERFORMANCE OR  
SUITABILITY OF ANY THIRD-PARTY SOFTWARE  
OR EQUIPMENT, WHETHER SUCH THIRD-PARTY  
SOFTWARE OR EQUIPMENT IS INCLUDED WITH  
THE PRODUCT DISTRIBUTED BY SAMSUNG OR  
OTHERWISE, INCLUDING THE ABILITY TO  
INTEGRATE ANY SUCH SOFTWARE OR  
EQUIPMENT WITH THE PRODUCT. THE QUALITY,  
CAPABILITIES, OPERATIONS, PERFORMANCE  
AND SUITABILITY OF ANY SUCH THIRD-PARTY  
SOFTWARE OR EQUIPMENT LIE SOLELY WITH  
THE PURCHASER AND THE DIRECT VENDOR,  
OWNER OR SUPPLIER OF SUCH THIRD-PARTY  
SOFTWARE OR EQUIPMENT, AS THE CASE MAY  
BE.  
This Limited Warranty allocates risk of Product failure  
between Purchaser and SAMSUNG, and SAMSUNG's  
Product pricing reflects this allocation of risk and the  
limitations of liability contained in this Limited Warranty.  
The agents, employees, distributors, and dealers of  
Chapter 21 - Troubleshooting, Safety, and Warranty  
186  
 
SAMSUNG are not authorized to make modifications to  
this Limited Warranty, or make additional warranties  
binding on SAMSUNG. Accordingly, additional  
statements such as dealer advertising or presentation,  
whether oral or written, do not constitute warranties by  
SAMSUNG and should not be relied upon.  
Samsung Telecommunications America, L.P.  
1130 East Arapaho Road  
Richardson, Texas 75081  
Phone: 1-800-SAMSUNG  
Phone: 1-888-987-HELP (4357)  
©2002 Samsung Telecommunications America. All rights  
reserved. No reproduction in whole or in part allowed without  
prior written approval. Specifications and availability subject  
to change without notice.  
Chapter 21 - Troubleshooting, Safety, and Warranty  
187  
 
Chapter 21 - Troubleshooting, Safety, and Warranty  
188  
 

Q Logic Switch 16HA User Guide
Radio Shack Scanner PRO 97 User Guide
Riccar Vacuum Cleaner R20D User Guide
Roberts Radio Clock Radio CR9945 User Guide
Roberts Radio Portable Radio R983 User Guide
Samsung Cell Phone A580 User Guide
Samsung Microwave Oven DE68 01953A User Guide
Samsung Printer CLP 610 User Guide
Samsung Tablet GT N5100 User Guide
Samsung Washer WT80S0P User Guide