Samsung Air Conditioner WC12ZR User Guide

OWNERS INSTRUCTIONS  
MANUAL DE INSTRUCCIONES  
MANUEL DUTILISATION  
MANUAL DE INSTRUÇÕES  
ISTRUZIONI PER LUSO  
AW127JE/B  
AW126JE/B  
AW147JB  
AW146JB  
AW12A6(A7)JD  
AW12A6(A7)JA  
WC12ZR  
Window-type Room Air Conditioner ( Cool )  
Acondicionador de aire doméstico sistema de tipo ventana ( Refrigeración )  
Climatiseur de type Fenêtre ( Refroidissement )  
O ar Condicionado de Window-Type ( Refrigeração )  
Condizionatore daria per ambienti da finestra ( Raffreddamento )  
E
S
F
P
I
DB68-30875B(3)  
 
Contents  
PREPARING YOUR AIR CONDITIONER  
Safety Precautions .........................................................................................  
Air Conditioning Unit - Main Parts, Buttons and Display ................................  
Remote Control Buttons .................................................................................  
Getting Started ...............................................................................................  
Inserting the Remote Control Batteries ..........................................................  
2
4
5
6
7
OPERATING YOUR AIR CONDITIONER  
Cooling Your Room .........................................................................................  
Airing Your Room ............................................................................................  
Adjusting the Air Flow Direction Horizontally ................................................. 10  
Adjusting the Air Flow Direction Vertically ...................................................... 10  
8
9
PROGRAMMING YOUR AIR CONDITIONER  
Switching the Unit Off Automatically (Off Timer) ............................................ 11  
Cancelling the Off Timer ................................................................................. 11  
RECOMMENDATIONS FOR USE  
Operating Recommendation ........................................................................... 12  
Temperature and Humidity Ranges ................................................................ 12  
Cleaning Your Air Conditioner ......................................................................... 13  
Solving Common Problems ............................................................................ 14  
Installing a Filter ............................................................................................. 15  
Technical Specifications ................................................................................. 15  
METHOD OF INSTALLATION ..................................................................................... 16  
E-3  
 
Air Conditioning Unit - Main Parts, Buttons and Display  
The design and shape are subject to  
change according to the model.  
Inner air flow blades  
(right/left orientation)  
Air outlet  
Outer air flow blades  
(up/down orientation)  
Air inlet (Outside)  
Ventilation lever  
Air inlet (inside)  
Air filter  
(The air filter is located inside)  
Power plug  
The type of power plug  
may differ, depending  
on the local power supply.  
The power plug may be  
not supplied depending  
on the model.  
Temperature/timer setting  
Remote control sensor  
Temperature indicator  
Timer indicator  
Operating mode indicators  
(COOL, FAN)  
ON/OFF & Operating mode  
selection button  
E-4  
 
Remote Control - Buttons  
Timer setting buttons  
Operating mode selection  
buttons (FAN, COOL)  
Temperature adjustment  
buttons  
ON/OFF Button  
Fan speed adjustment  
buttons  
Air flow blade swing button  
E-5  
 
Getting Started  
You have just purchased a w indow -type room air conditioner and it has been installed by your  
installation specialist.  
Your Ow ners Instructions contain m uch valuable inform ation on using your air conditioner.  
Please take the tim e to read them as they w ill help you take full advantage of the units features.  
The booklet is organized as follow s.  
The follow ing figures are show n on pages 4 and 5:  
-
-
Air conditioning unit (m ain parts, buttons and display)  
Rem ote control (buttons)  
They w ill help you find the buttons and understand the sym bols displayed.  
In the m ain part of the docum ent, you w ill find a series of step-by-step procedures for each  
function available.  
The illustrations in the step-by-step procedures use four different sym bols:  
NOTE  
PRESS  
PUSH  
IMPORTANT  
Moreover, applicable, w herever the illustrations show the positions of the buttons on both the  
rem ote control and the unit itself.  
For the...  
The illustrations have a...  
Remote control  
Dark background.  
Example:  
Unit itself  
White background.  
Example:  
E-6  
 
Inserting the Remote Control Batteries  
You m ust insert or replace the rem ote control batteries w hen:  
You purchase the air conditioner  
The rem ote control does not w ork correctly  
Use two LR03 (R03) 1.5 V batteries. Do not use old  
batteries or different kinds of batteries together.  
Batteries may be completely discharged after 12 months,  
even if they have not actually been used.  
1
2
Push the battery cover on the rear of the remote control with your thumb in  
the direction of the arrow and remove it.  
Insert the two batteries, taking care to respect the polarities:  
+ on the battery with + on the remote control  
– on the battery with – on the remote control  
3
Close the cover by sliding it back until it clicks into place.  
Result:  
You can control all the functions on your air conditioning unit  
directly from your seat, using the remote control.  
E-7  
 
Cooling Your Room  
You m ust select the Cool m ode if you w ish to low er the tem perature  
in your room . You can also set the fan speed.  
1
If necessary, press the  
(On/Off) button.  
Remote Control  
Control Panel  
Result:  
The operating mode indicator (COOL or FAN) on the  
unit comes on.  
The air conditioner starts up in the mode selected  
when the unit was last used.  
The unit beeps twice.  
The air conditioner is fitted with a protection mechanism to prevent  
the unit from being damaged when it is started immediately after  
being:  
Plugged in  
Stopped  
It will start up normally after a three-minute rest period.  
2
If the COOL indicator is not lit up on the unit:  
Press the COOL button on the remote control  
or  
Press the POWER/MODE button on the unit one or more times until  
the COOL indicator lights up  
Result:  
The unit beeps each time you press POWER/MODE.  
The air conditioner starts up in Cool mode.  
You can change modes at any time.  
3
To adjust the temperature, press the  
or  
buttons on the remote  
control one or more times until the required temperature is displayed.  
Possible temperatures are between 18°C and 30°C inclusive.  
Result:  
Each time you press the temperature buttons:  
The temperature is adjusted by 1°C and  
displayed on the control panel  
The unit beeps  
The air conditioner starts cooling if the room temperature  
is higher than the selected temperature.  
4
5
To set the fan speed to...  
Then...  
High  
Low  
Press the  
Press the  
button on the remote control.  
button on the remote control.  
Result:  
Each time you press a button, the unit beeps.  
To control the direction of the air flow, refer to page 10.  
E-8  
 
Airing Your Room  
If the atm osphere in your room is stale, you can air it using the Fan  
feature and if necessary, evacuate the stale air outside.  
1
2
If you wish to evacuate stale air outside, push the ventilation lever on the  
front of the unit to the right and the open position ( ).  
Result: The air inside the room circulates and stale air is evacuated  
outside.  
Otherwise, push the ventilation lever to the left and the closed position (  
Result: The air simply circulates inside the room.  
).  
If necessary, press the  
(On/Off) button.  
Remote Control  
Control Panel  
Result:  
The operating mode indicator (COOL or FAN) on the  
unit comes on.  
The air conditioner starts up in the mode selected  
when the unit was last used.  
The unit beeps twice.  
3
If the FAN indicator is not lit up on the unit:  
Press the FAN button on the remote control  
or  
Press the POWER/MODE button on the unit one or more times until  
the FAN indicator lights up  
Result:  
The unit beeps each time you press POWER/MODE.  
The air conditioner starts up in Fan mode.  
You can change modes at any time.  
When the air conditioner is in Fan mode, the  
temperature is not displayed; moreover, you do not  
need to set the temperature.  
4
5
To set the fan speed to...  
Then...  
High  
Low  
Press the  
Press the  
button on the remote control.  
button on the remote control.  
Result:  
Each time you press a button, the unit beeps.  
To control the direction of the air flow, refer to page 10.  
E-9  
 
Adjusting the Air Flow Direction Horizontally  
Depending on the position of the unit in your room , you can adjust  
the orientation of the inner air flow blades on the right-hand side of  
the unit, thus increasing the efficiency of the air conditioner.  
Remote Control  
1
Press the  
Result:  
button on the remote control.  
The inner blades swing automatically left and right.  
2
To stop the blades moving left and right, press the  
button again.  
To stop the blades in a specific position and orient the air flow in the  
corresponding direction, simply press the  
blades are in the desired position.  
button when the  
Adjusting the Air Flow Direction Vertically  
Again depending on the position of the unit in your room , you can  
adjust the orientation of the outer air flow blades on the right-hand  
side of the unit.  
RECOMMENDATION  
When...  
Adjust the blades to face...  
Cooling  
Upwards.  
Adjust the air flow blades to the desired position, by pushing them upwards or  
downwards.  
If you orient the air flow blades downwards and the unit operates in Cool mode  
for a long period of time, dew may:  
Form on the surface of the blades  
Drip from the blades  
E-10  
 
Switching the Unit Off Automatically (Off Timer)  
You can set the tim er to sw itch the air conditioner off autom atically  
at a given tim e.  
Exam ple:  
You w ish to sw itch the unit off tw o hours after you  
have gone to bed.  
Remote Control  
Control Panel  
1
If necessary, press the  
(On/Off) button.  
2
Select the required mode by pressing the appropriate button:  
COOL or FAN on the remote control  
POWER/MODE button on the unit (press it one or more times until  
the appropriate operating mode indicator lights up)  
3
Set the operating time by pressing:  
TIMER  
or  
on the remote control one or more times.  
Example: To switch the unit off two hours after you have gone to bed, set  
the operating time to 2 hours.  
Possible operating times are between 1 and 24 hours inclusive.  
Result:  
The Hour indicator flashes for about ten seconds.  
The operating time is displayed and decreased  
automatically to indicate the remaining time.  
The air conditioner switches off automatically when  
the operating time reaches zero.  
You can change your setting at any time.  
Cancelling the Off Timer  
If you no longer w ish to use the Off Tim er that you have set, you can  
cancel it at any tim e.  
Remote Control  
Control Panel  
To cancel the timer, press:  
TIMER  
or  
on the remote control one or more times until “--” is displayed.  
Result:  
The unit beeps each time you press a button.  
The Hour indicator on the unit switches off.  
The air conditioner operates normally.  
E-11  
 
Operating Recommendation  
Here is a recom m endation that you should follow w hen using your air conditioner.  
Topic  
Recommendation  
Power failure  
If a power failure occurs when the air conditioner is  
operating, the unit is switched off. When the power  
returns, you must press  
(On/Off) to restart it.  
Temperature and Humidity Ranges  
The follow ing table indicates the tem perature and hum idity ranges w ithin w hich the air conditioner  
can be used.  
Mode  
Indoor Temperature  
Outdoor Temperature  
Indoor Humidity  
Cooling  
21°C to 32°C approx.  
21°C to 43°C approx.  
80% or less  
If the air conditioner is used at...  
Then...  
Higher temperatures  
The automatic protection feature may be triggered and the air  
conditioner stopped.  
Lower temperatures  
A water leakage or some other malfunction may happen if the  
heat exchanger freezes.  
Higher humidity levels  
Water may condense on and drip from the surface of the unit if it is  
used for long periods.  
E-12  
 
Cleaning Your Air Conditioner  
To get the best possible use out of your air conditioner,  
you must clean it regularly by two weeks to remove the dust on the air filter.  
Before cleaning your air conditioner, ensure that it is  
switched off and unplugged from the wall socket.  
Open the front grille by pulling on the tabs of the unit.  
1
The removal of the front grille makes it easier to clean the air  
conditioner. After opening the front grille, lift it up as much as  
possible, then pull down to release it.  
Grasp the handle on the air filter and lift it slightly and then out to the front.  
Remove all dust on the air filter with a vacuum cleaner or brush.  
When you have finished, slide the air filter back into position.  
2
3
4
5
Front grille  
Clean the outer surfaces with a damp cloth and mild detergent  
(do NOT use benzene, solvents or other chemicals).  
Wipe them dry with a clean, soft cloth.  
Front grille  
Grille groove  
Body guide  
If you...  
Then...  
Will not be using the  
air conditioner for a  
long period of time  
Set the fan going for a few hours  
to dry the inside of the air conditioner  
thoroughly.  
Switch the air conditioner off and  
unplug it from the wall socket.  
Clean the filter and outer surfaces.  
Have not used the air  
conditioner for a long  
period of time  
Set the fan going for a few hours to  
dry the inside of the air conditioner  
thoroughly.  
E-13  
 
Solving Common Problems  
Before contacting the after-sales service, perform the follow ing sim ple checks. They m ay save you  
the tim e and expense of an unnecessary call.  
Problem  
Explanation/Solution  
The air conditioner does not  
operate at all  
Check that the circuit breaker used for the air conditioner has not been  
triggered.  
Check that the power cable is plugged into a wall socket and the socket  
is switched on, if necessary.  
Check that the operating mode indicator (COOL or FAN) on the  
unit is lit up; if necessary press  
(On/Off) on the remote control or unit.  
The air conditioner does not  
operate with the remote control  
Check that there are no obstacles between you and the unit.  
Replace the remote control batteries if necessary.  
Check that you are close enough to the unit (seven metres/yards or less).  
No beep is heard when you press  
(On/Off) on the remote control  
Check that you are pointing the remote control at the remote control  
sensor on the unit.  
Replace the remote control batteries if necessary.  
The air conditioner does not  
cool  
Check that the correct operating mode has been selected COOL.  
The room temperature may be too low.  
Dust may be blocking the air filter; refer to page 13 for cleaning  
instructions.  
Check that there is no obstacle blocking the air flow into or out of the unit.  
The air flow direction does not  
change when you press the  
button  
Check that the air conditioner has been switched on; if necessary, press  
(On/Off) on the remote control or unit.  
The timer is not correctly triggered  
Check that the timer has been programmed correctly; refer to page 11.  
Air the room.  
Odours are permeated in the  
room during air conditioning  
E-14  
 
Installing a Filter  
The air conditioner can be fitted w ith an Electrostatic filter to rem ove  
m inute dust particles. The service life of the filter is approxim ately three  
m onths depending on the tim e during w hich the air conditioner is used.  
Remove the vinyl packing from the filter.  
1
Filter guard  
Filter holder  
Do not remove the packing from an electrostatic filter until you  
wish to use the filter, as it will lose its properties.  
Open the front grille by pulling on the tabs of the unit.  
2
3
Grasp the handle on the air filter and lift it slightly and then out to the front.  
Remove the filter guard into the air filter.  
4
5
Insert the Electrostatic filter in the filter holder and then re-assemble  
it in the original condition.  
Air filter  
Air purifying system  
Model  
Electrostatic filter  
supplied  
AW127JE/B  
AW147JB  
AW12A7JD  
AW12A7JA  
Electrostatic filter  
AW126JE/B  
AW146JB  
AW12A6JD  
AW12A6JA  
WC12ZR  
not supplied  
Technical Specifications  
Design and specifications are subject to change without notice.  
Model  
Power Supply  
AW127JE  
AW126JE  
WC12ZR  
220-240V~, 50Hz  
AW127JB  
AW126JB  
AW147JB  
AW146JB  
220V~, 60Hz  
AW12A6JD  
AW12A7JD  
200-220V~, 50Hz  
115V~, 60Hz  
AW12A6JA  
AW12A7JA  
E-15  
 
Method of Installation  
Before installation, be sure to check the installation area  
for the air conditioner, and installation method of the drain hose.  
Checkpoints prior to installation  
1 Check the cabinet and front grille of the unit for any harmful defects  
such as scratches.  
2 Be sure to check the power supply.  
- Refer to the specifications on the label attached to the unit.  
Installation Conditions  
1 As the unit is heavy, the wall or window of the installation area should  
have sufficient strength and durability for operation of the air conditioner,  
and for prevention of any vibration or noise.  
If it is weak, reinforcement work should be performed separately.  
2 It is advisable to install the air conditioner in the north or west side to  
prevent the effect of direct sunlight.  
When installing it in the south or east side due to unavoidable  
circumstances, it is advisable to install the sunshade to prevent the  
direct sunlight.  
In this case, take care not to cause any hindrance to the flow of outside air.  
3 When installing the air conditioner, be sure to obtain sufficient space on  
the rear side of the unit for smooth flow of air.  
When operating the air conditioner in closed areas such as inner building  
with cooling operation, and result in trouble with the unit.  
See the illustration below.  
Awning  
85mm  
min.  
300mm  
220mm  
500mm  
Fance, wall  
or other  
obstacle  
500mm  
500mm  
Approx.3˚  
750mm  
150mm min.  
If the wall is greater than 150mm thick,  
cut the wall back on a 45˚ angle if possible.  
45˚  
45˚  
100mm or more  
E-16  
 
Installation of the Drain Tube  
Fix the drain tube as shown in the figure.  
Rear  
Rubber cap  
Gasket  
Drain Tube  
Screws(2EA)  
Installation of the Drain Pan  
The procedure for installing the drain pan should be determined by the  
condition of the installing area.  
In the case of an area where the drain pan can not be directly  
installed on the rear side of the unit after installing the air conditioner.  
Example: High storage  
Open the front grille ; refer to page 13.  
1
2
Screw  
Remove the screw located at the lower section of the front grille.  
Front grille  
It is secured in the  
section depending on the model.  
Remove the front panel.  
3
3-1 Press both sides of the cabinet in the direction of the arrow  
as shown in the figure.  
3-2 Pull the lower part of the front panel slightly forward.  
(below three inches / 7cm)  
3-3 Lift the front panel upward.  
Applying excessive force to remove the front panel may cause  
damage to the tab ; be sure not to use excessive force.  
Front panel  
Remove two screws on the lower, right and left sides of the unit.  
4
5
6
7
Remove the chassis from the cabinet.  
Remove the rubber cap inserted into the basepan.  
Fix the drain pan as shown in the figure, and then connect the drain hose.  
(You can use any commercially-available drain hose.)  
Install the cabinet at the specified area after installing the drain pan,  
and then re-assemble it in the original condition.  
8
Screw  
Secure the front panel to the case by replacing the screw removed in  
step 2. If a screw not removed in step 2, secure the panel with a  
supplied screw.  
Rear  
Rubber cap  
Drain Hose  
In the case of an area where the drain pan can be directly installed  
on the rear side of the unit after installing the air conditioner.  
Drain Pan  
Follow steps 6 and 7 only  
1
Bottom-Side View with  
Drain Pan and Hose in Place  
E-17  
 
THIS AIR CONDITIONER IS MANUFACTURED BY:  
ESTE AIRE ACONDICIONADO HA SIDO FABRICADO POR:  
CE CLIMATISEUR EST FABRIQUE PAR:  
ESTE APARELHO DE AR CONDICIONADO É FABRICADO POR:  
QUESTO CONDIZIONATORE D’ARIA È PRODOTTO DA:  
ELECTRONICS  
Printed in Korea  
 

Radio Shack Battery Charger 23 043 User Guide
RBH Sound Speaker T 30LSE User Guide
RCA MP3 Docking Station RC60i User Guide
Rival Frozen Dessert Maker GC9155 CN User Guide
Roland Electronic Keyboard KR 777 User Guide
Roland MP3 Player R 05 User Guide
Ryobi Pole Saw RY52014 User Guide
Ryobi Trimmer RY13010 User Guide
Sanyo Microwave Oven em d754 User Guide
Sennheiser Headphones CX 6 Travel User Guide