Jabra BT2046 User Manual

Jabra® BT2046  
USER MANUAL  
THANK YOU  
Thank you for purchasing the Jabra BT2046 headset. We hope you  
enjoy it! This instruction manual will get you started and ready to  
make the most of your headset.  
ABOUT YOUR JABRA BT2046  
A
B
C
D
Answer/end button, on/off button  
LED light  
Charging socket  
Earhook  
C
A
B
D
WHAT YOUR HEADSET CAN DO  
Your Jabra BT2046 lets you do all this:  
-
-
-
-
-
-
-
Answer calls  
End calls  
Reject calls*  
Voice dialing*  
Last number redialing*  
Call waiting*  
Place call on hold*  
* Phone dependent  
JABRA BT2046  
2
Specifications  
-
-
Talk time up to 8 hours / standby time up to 10 days  
Rechargeable battery with charging option from AC power  
supply, USB cable or car charger (USB cable and car charger not  
included)  
-
-
-
-
Weight 10 grams  
Operating range up to 10 meters (appr. 33 feet)  
Headset and hands-free profiles (see glossary)  
Bluetooth® version 2.1 + eSCO & EDR  
GETTING STARTED  
You should follow three steps before using your headset:  
1. Charge your headset  
2. Activate Bluetooth® on your mobile phone (refer to the manual  
for your Mobile phone)  
3. Pair your headset to your mobile phone  
The Jabra BT2046 is easy to operate. The answer/end button on  
the headset performs different functions depending on how long  
you press it.  
Instruction  
Tap  
Duration of press  
less than 1 sec  
Approx: 2 sec  
Press  
Long press  
Approx: 5 sec  
JABRA BT2046  
3
CHARGE YOUR HEADSET  
Make sure that your headset is fully charged for 2 hours before you start  
using it. Use the AC power supply to charge from a power socket. When  
the light indicator (LED) has a solid LED light, your headset is charging.  
When the solid LED light turns off, it is fully charged.  
2 Hrs  
Use only the charger provided in the box - do not use chargers from any  
other devices as this may damage your headset.  
Please note: The lifetime of the battery will be significantly reduced if your  
device is left uncharged for a long period. We therefore recommend that  
you recharge your device at least once a month.  
TURNING YOUR HEADSET ON AND OFF  
5 Sec-Off  
2 Sec-On  
-
-
Press the answer/end button until you see a burst of flashes on  
the indicator light (LED) to turn on your headset.  
Long press the answer/end button until you see a burst of  
flashes on the indicator light (LED) to turn the headset off.  
JABRA BT2046  
4
Please note that the LED indicator light turns off after 1 minute to  
save battery. Headset is still active, and light will flash again after  
tap on the Answer/End button or any call activity. To check if the  
headset is on, tap the answer/end button once – the LED indicator  
light will flash, if the headset is on.  
PAIRING IT WITH YOUR PHONE  
Headsets are connected to phones using a procedure called  
‘pairing. By following a few simple steps, a phone can be paired  
with a headset in a matter of minutes.  
1. Put the headset in pairing mode  
-
When you turn on your Jabra BT2046 for the first time, the  
headset will automatically start up in pairing mode – i.e. it is  
discoverable for your phone. When the headset is in pairing  
mode the LED is constantly lit.  
2. Set your phone to ‘discover’ the Jabra BT2046  
-
Follow your phone’s instruction guide. First make sure that  
Bluetooth® is activated on your mobile phone. Then set your  
phone to discover the headset. This usually involves going  
to a ‘setup, ‘connector ‘Bluetooth® menu on your phone and  
selecting the option to ‘discoveror ‘adda device.*  
3. Your phone will find the Jabra BT2046  
-
Your phone will find the headset under name “BT2046. Your  
phone then asks if you want to pair with the headset. Accept  
by pressing ‘Yesor ‘OKon the phone and confirm with the  
passkey or PIN = 0000 (4 zeros) if asked. Your phone will  
confirm when pairing is complete.  
CONNECTIVITY  
DEVICES FOUND  
JABRA BT2046  
JABRA BT2046  
HANDSFREE  
MobilSurf  
JABRA BT2046  
added.  
The handsfree is  
now ready for use  
BLUETOOTH  
Infrared port  
Wap options  
Synchronization  
Networks  
Passkey:  
****  
SELECT  
SELECT  
OK  
SELECT  
* Phone dependent  
JABRA BT2046  
5
Put the headset in pairing mode manually  
In case of unsuccessful pairing, put the Jabra BT2046 into pairing  
mode manually. Make sure the headset is off. Press and hold the  
answer/end button for approximately 5 seconds until the LED has  
a constant light. The LED will flash before the light is constant –  
keep holding down the button until light is constant. Then follow  
the steps 2 and 3 above.  
WEAR IT HOW YOU LIKE IT  
The Jabra BT2046 is designed to wear with an earhook but it can  
also be worn without the earhook by simply inserting it in your  
right or left ear. If you prefer to use the earhook, click it on as  
shown on the illustration.  
For optimal performance, wear the Jabra BT2046 and your mobile  
phone on the same side of your body or within line of sight.  
In general, you will get better performance when there are no  
obstructions between your headset and your mobile phone.  
HOW TO  
Answer a call  
-
Tap the answer/end button on your headset to answer a call.  
End a call  
Tap the answer/end button to end an active call.  
-
JABRA BT2046  
6
Make a call  
-
When you make a call from your mobile phone, the call will  
(subject to phone settings) automatically transfer to your  
headset. If your phone does not support this function, tap on  
the answer/end button on the Jabra BT2046 to receive the call  
in the headset.  
Reject a call*  
-
Press the answer/end button when the phone rings to reject an  
in-coming call. Depending on your phone settings, the person  
who called you will either be forwarded to your voice mail or  
hear a busy signal.  
Activate voice dialing*  
-
Press the answer/end button to activate the voice-dialing  
function in the mobile phone. Please consult your phone user  
manual for more info about using this feature.  
Redial last number*  
Double tap the answer/end button.  
Call waiting and placing a call on hold*  
-
-
This lets you put a call on hold during a conversation and  
answer a waiting call.  
-
Press the answer/end button once to put the active call on hold  
and answer the waiting call.  
-
-
Press the answer/end button to switch between the two calls.  
Tap the answer/end button to end the active conversation.  
Functions marked with * are dependent on your phone  
supporting these features. Check your phone’s user manual for  
further information.  
* Phone dependent  
JABRA BT2046  
7
WHAT THE LIGHTS MEAN  
What you see  
What that means  
Solid light  
In pairing mode - see Pairing  
section.  
Very slow single flash  
Slow triple flash  
Connected to phone and in  
standby mode.*  
Not connected to phone and in  
standby mode.*  
Regular double flash  
Quick double flash  
Quadruple flash  
Active on call  
Incoming/Outgoing call  
Battery low  
* BT2046 is equipped with Jabra Discreet Light feature, meaning  
that light indicator (LED) turns off after 1 min of non-activity.  
Headset is still active, and light will flash again after a tap on the  
answer/end button or any call activity.  
USING JABRA BT2046 WITH TWO MOBILE PHONES  
Jabra BT2046 is capable of having two mobile phones (or  
Bluetooth® devices) connected to the headset at the same time.  
This will give you the freedom of having only one headset to  
operate both your mobile phones.  
In order to use the headset with two mobile phone please make  
sure you have ”paired” the Jabra BT2046 with both phones. See  
the section “PAIRING IT WITH YOUR PHONE” for instructions.  
Once you have “paired” your headset with two phones simply  
make sure your headset is on, and that Bluetooth® is enabled on  
the phones and the headset will then automatically connect to  
both phones.  
Please note that Last Number Redial will dial the number from  
the last outgoing call, independent of the mobile phone, and the  
Voice Dialing function will only work on the last paired mobile  
phone.  
JABRA BT2046  
8
If you are on a call and receive a second call you will be alerted by  
a tone. You can then:  
-
-
-
Put the first call on hold and accept the incoming call by press-  
ing the Answer/end button  
Switch between the two active calls by pressing the Answer/  
end button again  
Tap the Answer/end button once to end the first call and ac-  
cept the new incoming call  
TROUBLESHOOTING & FAQ  
I hear crackling noises  
-
For the best audio quality, always wear your headset on the  
same side of the body as your mobile phone.  
I cannot hear anything in my headset  
-
-
-
Increase the volume on your phone.  
Ensure that the headset is paired with the phone.  
Make sure that the phone is connected to the headset – if it  
does not connect either from the phone’s menu or by tapping  
the answer/end button, follow the pairing procedure (refer to  
pairing section in this user manual).  
-
You can determine whether your headset is connected to a  
device by looking at the flashes on the headset after tapping  
the answer/end button when the headset is on very slow  
single flashes means that the headset is connected to a device,  
slow triple flashes means that the headset is currently not  
connected.  
I have connection problems  
-
You may have deleted your headset pairing connection in your  
mobile phone. Follow the pairing instructions (refer to the  
section in this user manual).  
-
You can determine whether your headset is connected to a  
device by looking at the flashes on the headset after tapping  
the answer/end button when the headset is on very slow  
single flashes means that the headset is connected to a device,  
slow triple flashes means that the headset is currently not  
connected.  
JABRA BT2046  
9
Will the Jabra BT2046 work with other equipment?  
-
The Jabra BT2046 is designed to work with mobile phones.  
It can also work with other devices that are compliant with  
Bluetooth® version 1.1, 1.2, 2.0 or 2.1 and support a headset  
and/or hands-free profile.  
I cannot use Reject call, Call on hold, Redial or Voice dialing  
-
These functions are dependent on your phone supporting  
them. Please check your phone’s manual for further details.  
NEED MORE HELP?  
1. Web:  
(for the latest support info and online User Manuals)  
2. E-mail:  
Information:  
Deutsch  
English  
Español  
Français  
Italiano  
Nederlands  
Polska  
Scandinavian  
Россия  
JABRA BT2046  
10  
3. Phone:  
Belgique/Belgie  
+32 28080766  
+45 69918794  
+49 30896778991  
+45 35256540  
+33 182880251  
+39 0662207674  
+45 35256540  
+31 208080962  
+47 22577785  
+43 720880558  
+45 35256540  
+7 916 246 69 00  
+46 852507012  
+41 435002460  
+34 911875539  
+44 2033180070  
+45 35256540  
Danmark  
Deutschland  
Suomi  
France  
Italia  
Luxembourg  
Nederland  
Norge  
Österreich  
Portugal  
Россия  
Sverige  
Die Schweiz  
España  
United Kingdom  
International  
TAKING CARE OF YOUR HEADSET  
-
Always store the Jabra BT2046 with the power off and safely  
protected  
-
Avoid storage at extreme temperatures (above 45°C/113°F  
– including direct sunlight – or below -10°C/14°F). This  
can shorten battery life and may affect operation. High  
temperatures may also degrade performance.  
-
Do not expose the Jabra BT2046 to rain or other liquids.  
JABRA BT2046  
11  
GLOSSARY  
1
Bluetooth® Bluetooth® is a radio technology that connects  
devices, such as mobile phones and headsets, without wires or  
cords over a short distance (approx. 10 meters/33 feet). is safe  
to use. It is secure too, so once a connection has been made  
no-one can listen in and there is no interference from other  
2
Bluetooth® profiles are the different ways that devices  
communicate with other devices. Phones support the headset  
profile, the hands-free profile or both. In order to support a  
certain profile, a phone manufacturer must implement certain  
mandatory features within the phone’s software.  
3
4
5
Pairing creates a unique and encrypted link between two  
Bluetooth® devices and lets them communicate with each  
other. BluetoothTM devices will not work if the devices have  
not been paired.  
Passkey or PIN is a code that you enter on your Bluetooth® enabled  
device (e.g. a mobile phone) to pair it with your Jabra BT2046. This  
makes your Bluetooth® device and the Jabra BT2046 recognize each  
other and automatically work together.  
Standby mode is when the Jabra BT2046 is passively waiting  
for a call. When you ‘enda call on your mobile phone, the  
headset goes into standby mode.  
Dispose of the product according  
to local standards and regulations.  
JABRA BT2046  
12  
© 2012 GN Netcom US, Inc. All rights reserved. Jabra® is a registered  
trademark of GN Netcom A/S. All other trademarks included herein  
are the property of their respective owners. The Bluetooth® word  
mark and logos are owned by the Bluetooth SIG, Inc. and any use  
of such marks by GN Netcom A/S is under license. (Design and  
specifications subject to change without notice).  
© 2012 GN Netcom A/S. All rights reserved. Jabra® is a registered  
trademark of GN Netcom A/S. All other trademarks included herein  
are the property of their respective owners. The Bluetooth® word  
mark and logos are owned by the Bluetooth SIG, Inc. and any use  
of such marks by GN Netcom A/S is under license. (Design and  
specifications subject to change without notice).  
MADE IN CHINA  
MODEL: OTE9  

AudioBahn MULTIFUNCTIONAL SOURCE UNIT A3351 User Manual
BlueAnt Wireless Voice Control V1 User Manual
Bush Freeview High Definition Digital Set Top Box DFTA50FVE User Manual
Canon Camcorder PC981 User Manual
Canon DC 410 User Manual
Canon E 230 User Manual
Dual XR4115 User Manual
Gitzo GT2540LVL User Manual
JVC Car Stereo System KD S640 User Manual
JVC Everio GZR10BUS User Manual