Zanussi Water System 864026 User Manual

RANGE  
COMPOSITION  
The Zanussi Dishwashing range is produced  
for customers with the highest conceivable  
demands in efficiency, economy and  
ergonomics dishwashing operation. The  
product range comprises glasswashers,  
undercounter dishwashers, hood type  
dishwashers, rack type dishwashers, flight  
type dishwashers and pot and pan washers.  
The Reverse Osmosis Filter described in this  
sheet is suited for those installations where  
high quality on the rinsing and spot-free  
drying results at low operational costs is  
required. It has been specifically designed to  
be used with our glasswasher, undercounter  
and hood type machines. Thanks to the  
Reverse Osmosis technology, all the  
impurities (salts, particles and bacteria)  
contained in the water are completely  
removed avoiding any deposit on the  
glassware and cutlery surface thus  
guaranteeing shiny glasses and sparking  
cutleries.  
ZANUSSI  
EXTERNAL REVERSE OSMOSIS FILTER  
P R O F E S S I O N A L  
and one for pressure machines; the version  
for pressure machines is equipped with a  
buffer tank to guarantee the dishwasher  
minimum working pressure  
When used with hard water (water  
hardness > 27 fH), a polyphosphate filter is  
recommended to reduce membrane  
damages and need for descaling. The unit  
can be used with a maximum hardness of 45  
fH (or 2000µS/cm conductivity) for harder  
water a softener should be installed before  
the unit  
FUNCTIONAL AND  
CONSTRUCTION  
FEATURES  
Developed and produced in an ISO 9001  
and ISO 14001 certified factory.  
CFC free packaging.  
The use of softened water increases  
dramatically the life of the unit and will  
reduce the need for descaling.  
Impurities and bacteria retained by the  
membrane are eliminated by means of a  
self-cleaning system. Automatic membrane  
flushing occurs every 15 minutes during  
continuous operation or at the end of each  
operation cycle.  
The reverse osmosis filter requires cold  
water (min 2 °C, max 30°C) and feeding  
water pressure between 2-10 bar.  
The unit is a multi-step physical filtering: a  
built-in prefiltering device (sediment filter and  
an active carbon filter) eliminates particles,  
chlorine and possible smell from the water;  
the final filtering level uses the "reverse  
osmosis" principle pushing high-pressure  
water through a semi-permeable membrane  
to remove more than 95% of salts and  
impurities.  
Clear control lights on the front cover  
allow the user to constantly check the water  
quality  
Nominal flow rate is 300 liters/hour.  
The reverse osmosis filter is intended to  
be installed before the dishwashing to treat  
the dishwashing feeding water. Available in  
two versions: one for atmospheric machines  
TECHNICAL DATA  
CHARACTERISTICS  
MODELS  
REVOSM5ATM  
REVOSM5PRE  
864026  
864027  
External dimensions - mm  
width  
depth  
225  
466  
460  
29  
225  
466  
460  
29  
height  
Net weight - kg.  
Temperature  
min - °C  
max - °C  
Pressure  
2
30  
2
30  
min - bar  
max - bar  
2
10  
2
10  
 
ZANUSSI  
P R O F E S S I O N A L  
EAG01  
2009-06-19  
The Company reserves the right to alter technical specifications without prior notice.  
 

Weed Eater Trimmer RT110 User Manual
Wells Water Dispenser 1222 1222CA User Manual
Western Telematic Switch APS 16M User Manual
Whirlpool Ventilation Hood RHH 2300 User Manual
Windsor Vacuum Cleaner 22 User Manual
Wolfgang Puck Wok BEWK0030 User Manual
Xerox Network Card 098S04703 User Manual
Xerox Printer QLS 8100XE User Manual
Zenoah Brush Cutter BK3410FL S User Manual
Zenoah Chainsaw G3801 User Manual