Zanussi Washer ZWG 3100 User Manual

GB  
User manual  
2
Washing Machine  
ZWG 3100  
ZWG 3120  
 
• Always be sure, that there is no water leakage from  
hoses and their connections after the installation.  
• If the appliance is installed in a location subject tofrost,  
please read the “dangers of freezing” chapter.  
• Any plumbing work required to install this appliance  
should be carried out by a qualified plumber or com-  
petent person.  
Child safety  
• This appliance is not intended for use by person (in-  
cluding children) with reduced physical sensory or  
mental capabilities or lack of experience and knowl-  
edge unless they have been given supervision or in-  
struction concerning use of the appliance by a person  
responsible for their safety.  
• The packaging components (e.g. plastic film, poly-  
styrene) can be dangerous to children - danger of suf-  
focation! Keep them out of children’s reach  
• Any electrical work required to install this appliance  
should be carried out by a qualified electrician or com-  
petent person.  
• Keep all detergents in a safe place out of children’s  
reach.  
• Make sure that children or pets do not climb into the  
drum. To prevent children and pets becoming trapped  
inside the drum this machine incorporates a special  
feature.  
Use  
• This appliance is designed for domestic use. It must  
not be used for purposes other than those for which it  
was designed.  
• Only wash fabrics which are designed to be machine  
washed. Follow the instructionsoneachgarmentlabel.  
• Do not overload the appliance. See the Washing Pro-  
gramme Table.  
• Before washing, ensure that all pockets are empty and  
buttons and zips are fastened. Avoid washing frayed or  
torn articles and treat stains such as paint, ink, rust,  
and grass before washing. Underwired bras must NOT  
be machine washed.  
• Garments which have been in contact with volatile pe-  
troleum products should not be machine washed. If  
volatile cleaning fluids are used, care should be taken  
to ensure that the fluid is removed from the garment  
before placing in the machine.  
• Never pull the power supply cable to remove the plug  
from the socket; always take hold of the plug itself.  
To activate this device, ro- To disable this device and  
tate the button (without  
pressing it) inside the  
restore the possibility of  
closing thedoor, rotatethe  
door clockwise until the button anti-clockwise un-  
groove is horizontal. If  
necessary use a coin.  
til the groove is vertical.  
• Never use the appliance if the power supply cable, the  
control panel, the working surface or the base are  
damaged so that the inside of the washing machine is  
accessible.  
3
 
Product description  
1
2
3
4
5
6
Detergent dispenser drawer  
Control panel  
Door opening handle  
Rating plate  
Drain pump  
Adjustable feet  
1
2
3
4
5
6
Detergent dispenser drawer  
Compartment for detergent used for prewash and  
soak phase or for stain remover used during the stain  
action phase (if available). The prewash and soak deter-  
gent is added at the beginning of the wash programme.  
The stain remover is added during the stain action phase.  
Compartment for powder or liquid detergent used for  
main wash. If using liquid detergent pour it just before  
starting the programme.  
Compartment for liquid additives (fabric softener,  
starch).  
Follow the product manufacturer’s recommendations on  
quantities to use and do not exceed the «MAX» mark in  
the detergent dispenser drawer. Any fabric softener or  
starching additives must be poured into the compartment  
before starting the wash programme.  
4
 
Control panel  
Below is a picture of the control panel. It shows the programme selector dial as well as the buttons, pilot lights  
and the display. These are presented by relevant numbers on the following pages.  
1
2
3
4
5
6
7
1
2
3
4
Programme selector dial  
Temperature selector dial  
SPIN reduction button  
OPTIONS button  
5
6
7
EXTRA RINSE button  
START/PAUSE button  
Indicator Pilot Light  
Table of symbols  
Cotton  
Synthetics  
Special  
Rinse Hold  
Programme and temperature selector dials, spin speed button and available options  
Programme Selector Dial  
Rinse hold  
Itallowsyoutoswitchtheapplianceon/offand/ortoselect By selecting this function the water of the last rinse is not  
a programme.  
emptied out to prevent the fabrics from creasing. Before  
opening the door it will be necessary to empty out the  
water. To empty out the water, please read the paragraph  
«At the end of the programme».  
Temperature selector dial  
This dial allows you to select the temperature more suit-  
able to the laundry to be washed.  
By selecting the position Cold the machine will wash with  
cold water.  
Easy Iron  
By selecting this option the laundry is gently washed and  
spun to avoid any creasing. In this way ironing is easier.  
Furthermore the machine will perform some additional  
rinses in some programmes. On cotton programmes the  
maximum spin speed is reduced automatically.  
Available options:  
Spin  
By pressing this button you can change the spin speed of  
the selected programme.  
5
 
Super Quick  
When selecting a washing programme both lights 7.1  
and 7.2 illuminate.  
After having pressed the button 6 the only light corre-  
sponding to the running phase stays on. The machine  
starts working and the door is locked.  
The light7.3 illuminates at the end of the washing cycle.  
After a few minutes the door can be opened.  
Short cycle for lightly soiled items or for laundry which  
needs only freshening up. We recommend you to reduce  
the fabrics loading.  
Extra Rinse  
This appliance is designed for saving energy. If it neces-  
sary to rinse the laundry using an extra quantity of water  
(extra rinse), select this option. Some additional rinses  
will be performed. This option isrecommended for people  
who are allergic to detergents, and in areas where the  
water is very soft.  
Important!  
If the draining programme is selected any light will il-  
luminate.  
Start Pause  
This button allows you to start or to interrupt the selected  
programme.  
Indicator pilot light (7)  
First use  
ECO valve. Then run a cotton cycle at the highest tem-  
perature without any laundry in the machine, to remove  
any manufacturing residue from the drum and tub.  
Pour 1/2 a measure of detergent into the main wash  
compartment and start the machine.  
• Ensure that the electrical and water connections  
comply with the installation instructions.  
• Remove the polystyrene block and any material from  
the drum.  
• Pour 2 liters of water into the main wash compartment  
of the detergent drawer in order to activate the  
6
 
Daily use  
Load the laundry  
the red pilot light of button 6 will blink 3 times to indicate  
a wrong selection. The machine will not perform the new  
selected programme.  
Open the door by carefully  
pulling the door handle  
outwards. Place the laun-  
dry in the drum, one item  
at a time, shaking them out  
as much as possible.  
Close the door.  
Select the required temperature by turning the  
temperature selector dial (2)  
Turn clockwise this dial to select the more convenient to  
your laundry washing temperature.  
Select the available options by pressing buttons 3,  
4 and 5  
Depending on the programme, different functions can be  
combined. These must be selected after choosing the de-  
sired programme and before starting the programme.  
When these buttons are pressed, the corresponding pilot  
lights illuminate. When they are pressed again, the pilot  
lights go out. If an incorrect option is selected, the inte-  
grated red pilot light of the button 6 flashes for 3 times.  
Measure out the detergent and the fabric softener  
For the compatibility among the washing pro-  
grammes and the options see chapter «Washing  
Programmes».  
Pull out the dispenser drawer until it stops. Measure  
out the amount of detergent required, pour it into the  
main wash compartment or in the appropriate com-  
partment if the selected programme/option it requires  
(see more details in "Detergent dispenser drawer").  
If required, pour fabric softener into the compartment  
Start the programme by pressing button 6  
To start the selected programme, press the button 6 , the  
corresponding green pilot light stops blinking. The ap-  
pliance starts operating and the only pilot light corre-  
sponding to the running phase stays on.  
To interrupt a programme which is running, press the  
button 6 : the corresponding green pilot light starts blink-  
ing.  
marked  
(the amount used must not exceed the  
«MAX» mark in the drawer). Close the drawer gently.  
To restart the programme from the point at which it was  
interrupted, press the button 6 again .  
If an incorrect option is selected, the red pilot light of the  
button 6 blinks 3 times.  
Select the required programme by turning the  
programme selector dial (1)  
Turn the programme selector dial to the required pro-  
gramme. The washing machine will automatically select  
the maximum spin value provided for the programme you  
have chosen. You can change this value by pressing the  
corresponding button. The green pilot light of the button  
6 starts to flash.  
The selector dial can be turned either clockwise or coun-  
terclockwise. Turn to position « O » to reset programme/  
Switching the machine off.  
Altering an option or a running programme  
It is possible to change some options before the pro-  
gramme carries them out.  
Before you make any change, you must PAUSE the ap-  
pliance by pressing the button 6 .  
Changing a running programme is possible only by re-  
setting it. Turn the programme selector dial to O and then  
to the new programme position. Start the new programme  
by pressing the button 6 again. The washing water in the  
tub will be not emptied out.  
At the end of the programme the selector dial must be  
turned to position O, to switch the machine off.  
Caution! If you turn the programme selector dial to  
another programme when the machine is working,  
7
 
Interrupting a programme  
At the end of the programme  
Press the button 6 to interrupt a programme which is  
The machine stops automatically. The pilot light of button  
running, the corresponding green pilot light starts blink- 6 and the pilot light corresponding to the just finished  
ing.  
washing phase go off. The light 7.3 illuminates.  
If a programme or an option that ends with water left in  
the tub has been selected, the light 7.3 illuminates but the  
door remains locked to indicate that the water must be  
emptied out before opening the door.  
Press the button again to restart the programme.  
Cancelling a programme  
Turn the selector dial to « O » to cancel a programme  
which is running. Now you can select a new programme.  
Follow the below instructions to empty out the water:  
Opening the door  
1. Turn the programme selector dial to O .  
2. Select the draining or spinning programme.  
3. Reduce the spin speed if needed, by pressing the  
relevant button.  
After the programme has started the door is locked. If, for  
any reason, you need to open it, set firstly the machine to  
PAUSE by pressing the button 6 . After a few minutes it  
will be possible to open the door.  
If the door remains locked, this means that the machine  
is already heating or that the water level is too high. In  
any case, do not try to force the door!  
If you cannot open the door but you need to open it you  
have to switch the machine off by turning the selector dial  
to O . After a few minutes the door can be opened (pay  
attention to the water level and temperature!) .  
After closing the door, it is necessary to select the pro-  
gramme and options again and to press button 6 .  
4. Press button 6 .  
At the end of the programme, the door can be now opened.  
Turn the programme selector dial to O to switch the ma-  
chine off.  
Remove the laundry from the drum and carefully check  
that the drum is empty. If you do not intend to carry out  
another wash, close the water tap. Leave the door open to  
prevent the formation of mildew and unpleasant smells.  
Helpful hints and tips  
Sorting out the laundry  
Removing stains  
Follow the wash code symbols on each garment label and Stubborn stains may not be removed by just water and  
the manufacturer’s washing instructions. Sort the laundry detergent. It is therefore advisable to treat them prior to  
as follows: whites, coloureds, synthetics, delicates, wool- washing.  
lens.  
Blood: treat fresh stains with cold water. For dried stains,  
soak overnight in water with a special detergent then rub  
in the soap and water.  
Oil based paint: moisten with benzine stain remover, lay  
the garment on a soft cloth and dab the stain; treat several  
times.  
Dried grease stains: moisten with turpentine, lay the gar-  
ment on a soft surface and dab the stain with the fingertips  
and a cotton cloth.  
Rust: oxalic acid dissolved in hot water or a rust removing  
product used cold. Be careful with rust stains which are  
not recent since the cellulose structure will already have  
been damaged and the fabric tends to hole.  
Mould stains: treat with bleach, rinse well (whites and fast  
coloureds only).  
Before loading the laundry  
Never wash whites and coloureds together. Whites may  
lose their «whiteness» in the wash.  
New coloured items may run in the first wash; they should  
therefore be washed separately the first time.  
Button up pillowcases, close zip fasteners, hooks and  
poppers. Tie any belts or long tapes.  
Remove persistent stains before washing.  
Rub particularly soiled areas with a special detergent or  
detergent paste.  
Treat curtains with special care. Remove hooks or tie them  
up in a bag or net.  
Grass: soap lightly and treat with bleach (whites and fast  
coloureds only).  
8
 
1)  
The detergent and any additives must be placed in the  
appropriate compartments of the dispenser drawer before  
starting the wash programme.  
If using liquid detergents, a programme without prewash  
must be selected.  
Ball point pen and glue: moisten with acetone , lay the  
garment on a soft cloth and dab the stain.  
Lipstick: moisten with acetone as above, then treat stains  
with methylated spirits. Treat any residual marks with  
bleach.  
Your appliance incorporates a recirculation system which  
allows an optimal use of the concentrated detergent.  
Follow the product manufacturer’s recommendations on  
quantities to use and do not exceed the «MAX» mark in  
the detergent dispenser drawer .  
Red wine: soak in water and detergent, rinse and treat with  
acetic or citric acid, then rinse. Treat any residual marks  
with bleach.  
Ink: depending on the type of ink, moisten the fabric first  
1)  
with acetone , then with acetic acid; treat any residual  
marks on white fabrics with bleach and then rinse thor-  
oughly.  
Tar stains: first treat with stain remover, methylated spirits  
or benzine, then rub with detergent paste.  
Quantity of detergent to be used  
The type and quantity of detergent will depend on the type  
of fabric, load size, degree of soiling and hardness of the  
water used.  
Follow the product manufacturers’ instructions on quan-  
tities to use.  
Use less detergent if:  
Detergents and additives  
Good washing results also depend on the choice of de-  
tergent and use of the correct quantities to avoid waste  
and protect the environment.  
• you are washing a small load  
Although biodegradable, detergents contain substances  
which, in large quantities, can upset the delicate balance  
of nature.  
The choice of detergent will depend on the type of fabric  
(delicates, woollens, cottons, etc.), the colour, washing  
temperature and degree of soiling.  
All commonly available washing machine detergents may  
be used in this appliance:  
• powder detergents for all types of fabric  
• powder detergents for delicate fabrics (60°C max) and  
woollens  
• liquid detergents, preferably for low temperature wash  
programmes (60°C max) for all types of fabric, or spe-  
cial for woollens only.  
• the laundry is lightly soiled  
• large amounts of foam form during washing.  
Degrees of water hardness  
Water hardness is classified in so-called “degrees” of  
hardness. Information on hardness of the water in your  
area can be obtained from the relevant water supply com-  
pany, or from your local authority. If the water hardness  
degree is medium or high we suggest you to add a water  
softenerfollowingalwaysthemanufacturer’sinstructions.  
When the degree of hardness is soft, readjust the quantity  
of the detergent.  
1) do not use acetone on artificial silk  
9
 
Washing programmes  
Programme  
Maximum and Minimum Temperature  
Cycle Description  
Maximum Spin Speed  
Maximum Fabrics Load  
Type of Laundry  
Detergent  
Compartment  
Options  
COTTON  
90°-Cold  
SPIN  
RINSE HOLD  
EASY IRON  
SUPER QUICK  
EXTRA RINSE  
2)  
Main wash - Rinses  
Maximum spin speed 1000 rpm for ZWG 3100  
Maximum spin speed 1200 rpm for ZWG 3120  
1)  
Max. load 6 kg - Reduced load 3 kg  
White and coloured cotton (normally soiled items).  
3)  
COTTON + PREWASH  
SPIN  
90°-Cold  
RINSE HOLD  
EASY IRON  
SUPER QUICK  
EXTRA RINSE  
2)  
Prewash - Main wash - Rinses  
Maximum spin speed 1000 rpm for ZWG 3100  
Maximum spin speed 1200 rpm for ZWG 3120  
1)  
Max. load 6 kg - Reduced load 3 kg  
White and coloured cotton (heavy soiled items).  
4)  
SPIN  
RINSE HOLD  
EASY IRON  
COTTON + ECO  
90°-40°  
2)  
Main wash - Rinses  
Maximum spin speed 1000 rpm for ZWG 3100  
Maximum spin speed 1200 rpm for ZWG 3120  
Max. load 6 kg  
EXTRA RINSE  
White and coloured cotton. This programme can be selected  
for slightly or normally soiled cotton items. The temperature  
willdecreaseandthewashingtimewillbeextended. Thisallows  
to obtain a good washing efficiency by saving energy.  
4)  
3)  
SPIN  
RINSE HOLD  
EASY IRON  
COTTON + ECO + PREWASH  
90°-40°  
2)  
Prewash - Main wash - Rinses  
Maximum spin speed 1000 rpm for ZWG 3100  
Maximum spin speed 1200 rpm for ZWG 3120  
Max. load 6 kg  
EXTRA RINSE  
White and coloured cotton. This programme can be selected  
for normally soiled cotton items. The temperature will decrease  
and the washing time will be extended. This allows to obtain a  
good washing efficiency by saving energy.  
10  
 
Programme  
Maximum and Minimum Temperature  
Cycle Description  
Maximum Spin Speed  
Maximum Fabrics Load  
Type of Laundry  
Detergent  
Compartment  
Options  
SYNTHETICS  
60°-Cold  
Main wash - Rinses  
Maximum spin speed 900 rpm for ZWG 3100  
Maximum spin speed 900 rpm for ZWG 3120  
SPIN  
RINSE HOLD  
EASY IRON  
SUPER QUICK  
EXTRA RINSE  
2)  
1)  
Max. load 3 kg - Reduced load 1,5 kg  
Synthetic or mixed fabrics: underwear, coloured garments,  
non-shrink shirts, blouses.  
SYNTHETICS + PREWASH  
60°-Cold  
Prewash - Main wash - Rinses  
Maximum spin speed 900 rpm for ZWG 3100  
Maximum spin speed 900 rpm for ZWG 3120  
SPIN  
RINSE HOLD  
EASY IRON  
SUPER QUICK  
EXTRA RINSE  
2)  
1)  
Max. load 3 kg - Reduced load 1,5 kg  
Synthetic or mixed fabrics: underwear, coloured garments,  
non-shrink shirts, blouses.  
DELICATES  
40°-Cold  
Main wash - Rinses  
Maximum spin speed 700 rpm for ZWG 3100  
Maximum spin speed 700 rpm for ZWG 3120  
SPIN  
RINSE HOLD  
SUPER QUICK  
EXTRA RINSE  
1)  
Max. load kg 3 - Reduced load 1,5 kg  
Delicate fabrics: acrylics, viscose, polyester.  
WOOL  
40°-Cold  
SPIN  
RINSE HOLD  
Main wash - Rinses  
Maximum spin speed 1000 rpm for ZWG 3100  
Maximum spin speed 1000 rpm for ZWG 3120  
Max. load 2 kg  
Washing programme for machine washable wool as well as for  
hand washable woollens and delicate fabrics. Note : A single  
or bulky item may cause imbalance. If the appliance doesn’t  
perform the final spin phase, add more items, redistribute the  
load manually and then select the spinning programme.  
11  
 
Programme  
Maximum and Minimum Temperature  
Cycle Description  
Maximum Spin Speed  
Maximum Fabrics Load  
Type of Laundry  
Detergent  
Compartment  
Options  
HANDWASH  
30°-Cold  
SPIN  
RINSE HOLD  
Main wash - Rinses  
Maximum spin speed 1000 rpm for ZWG 3100  
Maximum spin speed 1200 rpm for ZWG 3120  
Max. load 2 kg  
Special programme for delicate fabrics with «hand washing»  
care symbol.  
JEANS  
60°-Cold  
Main wash - Rinses  
Maximum spin speed 1000 rpm for ZWG 3100  
Maximum spin speed 1200 rpm for ZWG 3120  
Max. load 3 kg  
SPIN  
RINSE HOLD  
EASY IRON  
2)  
With this programme it is possible to wash items like pants,  
shirts or jackets in denim and also jersey realized with hi-tech  
materials. (The Extra Rinse option will be activated automati-  
cally).  
SPORT INTENSIVE  
40°-Cold  
Prewash - Main wash - Rinses  
SPIN  
RINSE HOLD  
EXTRA RINSE  
Maximum spin speed 900 rpm for ZWG 3100  
Maximum spin speed 900 rpm for ZWG 3120  
Max. load 3 kg  
This programme is suitable for washing heavily soiled sport  
items. The machine will add automatically a prewash phase  
before the main wash to eliminate mud stains.  
RINSES  
Rinses  
SPIN  
RINSE HOLD  
EASY IRON  
EXTRA RINSE  
2)  
Maximum spin speed 1000 rpm for ZWG 3100  
Maximum spin speed 1200 rpm for ZWG 3120  
Max. load 6 kg  
With this programme it is possible to rinse and spin cotton  
garments which have been washed by hand. The machine per-  
forms 3 rinses, followed by a final long spin. The spin speed  
can be reduced.  
12  
 
Programme  
Maximum and Minimum Temperature  
Cycle Description  
Maximum Spin Speed  
Maximum Fabrics Load  
Type of Laundry  
Detergent  
Compartment  
Options  
DRAIN  
Draining of water  
Max. load 6 kg  
For emptying out the water of the last rinse in programmes with  
the Rinse Hold option selected.  
SPIN  
SPIN  
Drain and long spin  
Maximum spin speed 1000 rpm for ZWG 3100  
Maximum spin speed 1200 rpm for ZWG 3120  
Max. load 6 kg  
Separate spin for hand washed garments and after programmes  
with the Rinse Hold option selected. You can choose the spin  
speed by pressing the relevant button to adapt it to the fabrics  
to be spun.  
O = OFF  
For cancelling the programme which is running or to switch the machine off .  
1) If you select the Super Quick option by pressing button 4 , we recommend that you reduce the maximum load as indicated. Full  
loading is possible however with somewhat reduced cleaning results.  
2) Max. load with Easy iron option 1 kg  
3) If using liquid detergents, a programme without PREWASH must be selected.  
4) This programme is not active at a temperature lower than 40°C.  
What to do if…  
Certain problems are due to lack of simple maintenance  
Once the problem has been eliminated, press the button  
or oversights, which can be solved easily without calling 6 to restart the programme. If after all checks, the problem  
out an engineer. Before contacting your local Service  
Centre, please carry out the checks listed below.  
During machine operation it is possible that the red pilot  
light of button 6 blinks to indicate that the machine is not  
working.  
persists, contact your local Service Centre.  
13  
 
Problem  
Possible cause/Solution  
The door has not been closed (the button 6 red light blinks).  
• Close the door firmly.  
The plug is not properly inserted in the power socket.  
• Insert the plug into the power socket.  
There is no power at the socket.  
The washingmachinedoesnotstart:  
• Please check your domestic electrical installation.  
The main fuse has blown.  
• Replace the fuse.  
The programme selector dial is not correctly positioned and the button 6 has  
not been pressed.  
• Please turn the selector dial and press the button 6 again.  
The water tap is closed (the button 6 red light blinks).  
• Open the water tap.  
The inlet hose is squashed or kinked (the button 6 red light blinks).  
• Check the inlet hose connection.  
The filter in the inlet hose is blocked (the button 6 red light blinks).  
The machine does not fill:  
• Clean the water inlet hose filter.  
The door is not properly closed (the button 6 red light blinks).  
• Close the door firmly.  
The drain hose is squashed or kinked (the button 6 red light blinks).  
• Check the drain hose connection.  
The drain filter is clogged (the button 6 red light blinks).  
• Clean the drain filter.  
An option or a programme that ends with the water still in the tub or a that  
eliminates all the spinning phases has been selected.  
The machine does not empty and/or  
does not spin:  
• Select the draining or spinning programme.  
The laundry is not evenly distributed in the drum.  
• Redistribute the laundry.  
Too much detergent or unsuitable detergent (creates too much foam) has been  
used.  
• Reduce the detergent quantity or use another one.  
Check whether there are any leaks from one of the inlet hose fittings. It is not  
always easy to see this as the water runs down the hose; check to see if it is  
damp.  
• Check the water inlet hose connection.  
The drain or inlet hose is damaged.  
There is water on the floor:  
• Replace it with a new one.  
The cap on the emergency emptying hose has not been replaced or the filter  
has not been properly screwed in after cleaning action.  
• Refit the cap on the emergency emptying hose or screw the filter fully in.  
14  
 
Problem  
Possible cause/Solution  
Too little detergent or unsuitable detergent has been used.  
• Increase the detergent quantity or use another one.  
Stubborn stains have not been treated prior to washing.  
• Use commercial products to treat the stubborn stains.  
The correct temperature was not selected.  
Unsatisfactory washing results:  
• Check if you have selected the correct temperature.  
Excessive laundry load.  
• Reduce the laundry load.  
The programme is still running.  
• Wait the end of washing cycle.  
The door lock has not been released.  
• Wait a few minutes before opening the door.  
There is water in the drum.  
The door will not open:  
• Select drain or spin programme to empty out the water.  
The transit bolts and packing have not been removed.  
• Check the correct installation of the appliance.  
The support feet have not been adjusted  
• Check the correct levelling of the appliance.  
The laundry is not evenly distributed in the drum.  
The machine vibrates is noisy:  
• Redistribute the laundry.  
Maybe there is very little laundry in the drum.  
• Load more laundry.  
The electronic unbalance detection device has cut in because the laundry is  
not evenly distributed in the drum. The laundry is redistributed by reverse  
rotation of the drum. This may happen several times before the unbalance  
disappears and normal spinning can resume. If, after 10 minutes, the laundry  
is still not evenly distributed in the drum, the machine will not spin. In this  
case, redistribute the load manually and select the spin programme.  
Spinning starts late or the machine  
does not spin:  
• Redistribute the laundry.  
The load is too small.  
• Add moreitems, redistribute the load manually and then selectthe spinning  
programme.  
If you are unable to identify or solve the problem, contact  
our service centre. Before telephoning, make a note of the  
model, serial number and purchase date of your machine:  
the Service Centre will require this information.  
Mod. ... ... ...  
Prod. No. ... ... ...  
Ser. No. ... ... ...  
15  
 
Technical data  
Dimensions  
Width  
Height  
Depth  
60 cm  
85 cm  
63 cm  
Electrical connection  
Water supply pressure  
Information on the electrical connection is given on the rating plate, on the  
inner edge of the appliance door.  
Minimum  
Maximum  
0,05 MPa  
0,8 MPa  
Maximum Load  
Spin Speed  
Cotton  
6 kg  
Maximum  
1000 rpm (ZWG 3100)  
1200 rpm (ZWG 3120)  
Consumption values  
Programme  
Energy consumption  
(KWh)  
Water consumption (litres) Programme duration (Mi-  
nutes)  
White Cottons 90°  
Cottons 60°  
2.0  
1.3  
61  
58  
54  
135  
125  
150  
1)  
1.02  
Cotton ECO 60°  
Cottons 40°  
0.7  
0.5  
58  
50  
60  
53  
120  
80  
Synthetics 40°  
Delicates 40°  
0.55  
0.25  
65  
Wool/ Handwash 30°  
55  
1) «Cottons Eco» at 60°C with a load of 6 kg is the reference programme for the data entered in the energy label, in compliance with  
EEC 92/75 standards.  
The consumption data shown on this chart is to be considered purely indicative, as it may vary depending on  
the quantity and type of laundry, on the inlet water temperature and on the ambient temperature.  
Care and cleaning  
External cleaning  
Clean the exterior cabinet of the appliance with soap and  
water only, and then dry thoroughly.  
Warning! You must DISCONNECT the appliance  
from the electricity supply, before you can carry out  
any cleaning or maintenance work.  
Descaling  
Cleaning the dispenser drawer  
The water we use normally contains lime. It is a good idea The washing powder and additive dispenser drawer  
to periodically use a water softening powder in the ma-  
chine. Do this separately from any laundry washing, and  
according to the softening powder manufacturer's in-  
structions. This will help to prevent the formation of lime  
deposits.  
should be cleaned regularly.  
16  
 
Pull out the emergency  
emptying hose, place it in  
the container and remove  
its cap.  
Remove the drawer by  
pressing the catch down- part of the additive com-  
wards and by pulling it partment should be re-  
out. Flush it out under a moved.  
tap, to remove any traces  
To aid cleaning, the top  
When no more water comes out, unscrew the pump  
cover and remove it. Always keep a rag nearby to dry  
up spillage of water when removing the cover.  
Remove any objects from  
the pump impeller by ro-  
tating it.  
of accumulated powder.  
Put the cap back on the  
emergency emptying hose  
and place the latter back in  
its seat.  
Cleaning the drawer recess  
Having removed the draw-  
er, use a small brush to  
clean the recess, ensuring  
that all washing powder  
residue is removed from  
the upper and lower part of  
the recess.  
Screw the pump cover  
fully in.  
Close the pump door.  
Replace the drawer and run the rinse programme with-  
out any clothes in the drum.  
Cleaning the pump  
The pump should be inspected if:  
• the machine does not empty and/or spin;  
Caution! When the appliance is in use and  
depending on the programme selected there can be  
hot water in the pump.  
Never removethepumpcoverduringawashcycle, always  
wait until the appliance has finished the cycle, and is  
empty. When replacing the cover, ensure it is securely re-  
tightened so as to stop leaks and young children being  
able to remove it.  
• the machine makes an unusual noise during draining  
due to objects such as safety pins, coins etc. blocking  
the pump.  
Proceed as follows:  
• disconnect the appliance;  
• if necessary wait until the water has cooled down.  
Cleaning the water inlet filter  
Ifyourwaterisveryhardorcontainstracesoflimedeposit,  
the water inlet filter may become clogged. It is therefore  
a good idea to clean it from time to time.  
Open the pump door.  
Place a container close to  
the pump to collect any  
spillage.  
17  
 
• pull out the plug from the power socket;  
• close the water tap;  
• if necessary, wait until the water has cooled down;  
• open the pump door;  
• place a bowl on the floor and place the end of the  
emergency emptying hose into the bowl. Remove its  
cap. The water should drain by gravity into the bowl.  
When the bowl is full, put the cap back on the hose.  
Empty the bowl. Repeat the procedure until water stops  
flowing out;  
Turn off the water tap. Un-  
screw the water inlet hose.  
Clean the filter using a  
hard bristle brush. Tighten  
up the inlet hose.  
Frost precaution  
If the machine is exposed to temperatures below 0°C,  
certain precautions should be taken.  
• Turn off the water tap.  
• Unscrew the inlet hose.  
• clean the pump if necessary as previously described;  
• replace the emergency emptying hose in its seat after  
having plugged it;  
• screw the pump cover again and close the door.  
• Place the end of the emergency emptying hose and that  
of the inlet hose in a bowl placed on the floor and let  
water drain out.  
• Screw the water inlet hose back on and reposition the  
emergency emptying hose after having put the cap on  
again.  
Important! Every time you drain the water through the  
emergency emptying hose you must pour 2 litres of water  
into the main wash compartment of the detergent drawer  
and then run the drain programme. This will activate the  
ECO Valve device avoiding that part of the detergent  
remains unused at next washing.  
• When you intend to start the machine up again, make  
sure that the room temperature is above 0°C.  
Emergency emptying out  
If the water is not discharged, proceed as follows to empty  
out the machine:  
Installation  
Unpacking  
All transit bolts and packing must be removed before us-  
ing the appliance.  
You are advised to keep all transit devices so that they  
can be refitted if the machine ever has to be transported  
again.  
After removing all the  
packaging, carefully lay  
Remove the power supply  
cable and the hoses from  
machine on it's back to re- the hose holders on the  
movethepolystyrenebase rear of the appliance.  
from the bottom.  
18  
 
Water inlet  
Warning! This appliance must be connected to a  
cold water supply  
Caution! Before connecting up the appliance to new  
pipework or to pipework that has not been used for  
some time, run off a reasonable amount of water to flush  
out any debris that may have collected  
Unscrew the three bolts. Slideouttherelevantplas-  
tic spacers.  
Caution! Do not use the hose from your previous  
appliance to connect to water supply.  
Connect the hose to a tap  
with a 3/4” thread. Always  
use the hose supplied with  
the appliance.  
Open the porthole and re- Fill the smaller upper hole  
move the polystyrene  
block fitted on the door  
seal.  
and the two large ones  
with the corresponding  
plastic plug caps supplied  
in the bag containing the  
instruction booklet.  
35°  
45°  
Positioning  
Install the machine on a flat hard floor. Make sure that air  
circulation around the machine is not impeded bycarpets,  
rugs etc. Check that the machine does not touch the wall  
or other kitchen units. Level the washing machine by  
raising or lowering the feet. The feet may be tight to adjust  
as they incorporate a self locking nut, but the machine  
MUST be level and stable.  
Any necessary adjustment can be made with a spanner.  
Accurate levelling prevents vibration, noise and displace-  
ment of the machine during operation. Never place card-  
board, wood or similar materials under the machine to  
compensate for any unevenness in the floor.  
The other end of the inlet hose which connects to the  
appliance can be turned as showed in the picture.  
Do not place the inlet hose downwards. Angle the hose  
to the left or right depending on the position of your  
water tap. Set the hose correctly by loosening the ring  
nut. After positioning the inlet hose, be sure to tighten  
the ring nut again to prevent leaks.  
Caution! The inlet hose must not be lengthened. If  
it is too short and you do not wish to move the tap,  
you will have to purchase a new, longer hose specially  
designed for this type of use.  
If necessary, check the  
setting with a spirit level.  
Water drainage  
The end of the drain hose can be positioned in three ways:  
19  
 
Hooked over the edge of a  
sink using the plastic hose  
guide supplied with the  
machine.  
In a sink drain pipe branch . This branch must be above  
the trap so that the bend is at least 60 cm above the  
ground.  
Directly into a drain pipe at a height of not less than 60  
cm and not more than 90 cm. The end of the drain hose  
must always be ventilated , i.e. the inside diameter of  
the drain pipe must be larger than the outside diameter  
of the drain hose. The drain hose must not be kinked.  
In this case, make sure the end cannot come unhooked  
when the machine is emptying. This could be done by  
tying it to the tap with a piece of string or attaching it  
to the wall.  
Electrical connection  
Information on the electrical connection is given on the  
rating plate on the inner edge of the appliance door.  
Check that your domestic electrical installation can take  
the maximum load required, also taking into account any  
other appliances in use.  
responsibility for damage or injury through failure to  
comply with the above safety precaution.  
Caution! The power supply cable must be easily  
accessible after installing the machine.  
Caution! Should the appliance power supply cable  
need to be replaced, this must be carried out by a  
Service Centre.  
Caution! Connect the machine to an earthed socket.  
Caution! The manufacturer does not accept any  
Environment concerns  
Packaging materials  
The materials marked with the symbol  
>PE<=polyethylene  
>PS<=polystyrene  
>PP<=polypropylene  
The symbol  
on the product or on its packaging  
are recyclable.  
indicates that this product may not be treated as  
household waste. Instead it should be taken to the  
appropriate collection point for the recycling of electrical  
and electronic equipment. By ensuring this product is  
disposed of correctly, you will help prevent potential  
negative consequences for the environment and human  
health, which could otherwise be caused by inappropriate  
waste handling of this product. For more detailed  
information about recycling of this product, please  
contactyourlocalcouncil, yourhouseholdwastedisposal  
service or the shop where you purchased the product.  
This means that they can berecycled bydisposing ofthem  
properly in appropriate collection containers.  
Ecological hints  
Tosavewater, energyand tohelp protecttheenvironment,  
we recommend that you follow these tips:  
20  
 
• Normally soiled laundry may be washed without pre-  
washing in order to save detergent, water and time (the  
environment is protected too!).  
• Measure out detergent according to the water hard-  
ness, the degree of soiling and the quantity of laundry  
being washed.  
• The machine works more economically if it is fully  
loaded.  
• Withadequatepre-treatment, stainsandlimitedsoiling  
can be removed; the laundry can then be washed at a  
lower temperature.  
21  
 
22  
 
23  
 
web portal 1  
web portal 2  
 

Weider Home Gym 831159830 User Manual
Whirlpool Air Conditioner X05002V0 User Manual
Whirlpool Cooktop GJC3055RB03 User Manual
Whirlpool Oven WOS11EM4EB User Manual
Yamaha CD Player EMX100RDS User Manual
Yamaha Speaker System DVX C310 User Manual
Zanussi Convection Oven 239502 User Manual
Zanussi Dishwasher ZSF 6126 User Manual
Zebra Technologies Printer Q3DLUBA000002 User Manual
Zenith Flat Panel Television Z37LC6D User Manual