Zanussi Refrigerator ZC 85 L User Manual

REFRIGERATOR  
ZC 85 L  
INSTRUCTION BOOKLET  
2222 063-24  
 
CONTENTS  
Instructions for the user  
Instructions for the  
installer  
2
4
5
Important Safety Information  
Description of the appliance  
13  
14  
Technical specification  
Installation  
Positioning  
Operation  
14  
14  
Before use  
5
5
5
5
5
6
6
6
7
Rear Spacers  
Setting the temperature  
Fresh food refrigeration  
Normal operating sounds  
Dual purpose meat box  
Movable shelves  
15  
16  
Electrical Connection  
Door Reversal  
Positioning the door shelves  
CRISPÕN FRESH  
Cool Check Guide  
Hints and Tips  
8
8
Maintenance and Cleaning  
Internal cleaning  
8
8
8
9
9
9
External cleaning  
When the appliance is not in use  
Changing the light bulb  
Cleaning the filter  
Defrosting  
10  
11  
11  
12  
Something not working  
Service and Spare Parts  
Customer Care  
Guarantee Conditions  
2222 063-24  
3
 
DESCRIPTION OF THE APPLIANCE  
A
B
C
J
I
H
D
G
F
E
A- Dairy compartment  
B- Can storage shelf  
C- Can storage shelf  
D- Bottle storage shelf  
E- Salad crispers (to keep fruit and vegetables fresh)  
F- Glass shelf  
G- CrispÕn fresh filter  
H- Cool Check Temperature Guide  
I- Storage shelves  
J- Thermostat control  
4
 
OPERATION  
Before using  
Fresh food refrigeration  
Remove all securing tapes. Wash inside the  
appliance with lukewarm water and bicarbonate of  
soda (5 ml to 0.5 litre of water).  
To obtain the best performance, do not store warm  
food or evaporating liquids in the refrigerator; do  
cover or wrap the food, particularly if it has a strong  
flavour.  
Do not use soap or detergent as the smell may  
linger. Dry thoroughly.  
Do not cover the shelves with any protective  
material, such as paper, cardboard or plastic, which  
may obstruct the air circulation through them.  
Setting the temperature  
To help you use your refrigerator correctly, here are  
some more useful hints:  
The temperature inside the refrigerator is regulated  
by a thermostat with 6 temperature positions and an  
ÒOFFÓ (O) position.  
Raw meat (beef, pork, lamb & wild fowl): wrap in  
polythene bags and place on the glass shelf above  
the salad crispers.  
Position 1 = minimum coldness  
Position 6 = maximum coldness  
Meat can only be stored safely in this way for  
one or two days at the most.  
Turn the thermostat dial to the required position.  
The intermediate position is usually the most  
suitable (3-4).  
Fruit & vegetables: these should be thoroughly  
cleaned and placed in the bottom salad crispers.  
The thermostat setting can vary as the temperature  
inside the refrigeration compartment depends on the  
following factors:  
Butter & cheese: these should be placed in special  
airtight containers or wrapped in aluminium foil or  
polythene bags to exclude as much air as possible.  
Ð room temperature  
Milk bottles: these should have a cap and should be  
stored in the bottle rack on the door.  
Ð how often the door is opened  
Ð how much food is stored  
Ð position of the appliance  
Normal Operating Sounds  
Important  
¥
You may hear faint gurgling or bubbling sounds  
when the refrigerant is pumped through the coils  
or tubing at the rear, to the cooling  
plate/evaporator.  
If the fridge is not defrosting correctly, it is possible  
that because a very low temperature has been  
selected, the motor is working continuously, which  
prevents the defrost cycle from operating.  
¥
¥
When the compressor is on, the refrigerant is  
being pumped round, and you will hear a whirring  
sound or pulsating noise from the compressor.  
To ensure correct defrosting, a lower number should  
be selected on the thermostat and you should notice  
that the motor cuts out from time to time, which is  
correct.  
A thermostat controls the compressor, and you  
will hear a faint ÕclickÕ when the thermostat cuts in  
and out.  
If you wish to return to a lower temperature, turn the  
thermostat to a higher number, however you should  
turn the setting lower occasionally to allow automatic  
defrosting.  
Dual purpose meat box  
The meat box can also be used as a salad crisper.  
5
 
Movable shelves  
The walls of the refrigerator have runners so that  
shelves can be positioned as desired.  
D040  
Positioning the door shelves  
To permit storage of food packages of various sizes,  
the door shelves can be adjusted in height.  
To do this proceed as shown in the diagram.  
PR260  
PR262  
Use and features of the CRISPÕN  
AND FRESH filter  
ÒCrispÕn freshÓ is the glass shelf on top of the salad  
crispers which is fitted with special removable green  
filters.  
These filters allow cool air from the fridge to circulate  
through the drawers but help prevent moisture loss.  
By retaining moisture in foods such as fresh fruit,  
vegetables and salad they are kept fresher for  
longer.  
D749  
6
 
Cool Check Guide  
The guide consists of a temperature sensitive strip  
sealed in a shelf trim.  
When the fridge is operating at the safe temperature  
to store food the guide will appear black. If the  
temperature rises above this level the guide will  
show the words TOO WARM.  
TOO WARM  
Positioning of the Cool Check  
The shelf with the cool check temperature guide  
must be placed in the fridge according to the  
instructions located on the fridge wall and always  
ensure the guide is at the front.  
If the Cool Check shows TOO WARM  
In certain conditions the temperature guide may  
show TOO WARM if:  
¥
¥
¥
The fridge is switched off  
ZANUSSI  
The door has been recently opened  
A quantity of warmer food has been introduced to  
the fridge  
CCOO2  
¥
The fridge temperature is above the  
recommended maximum for the safer storage of  
food.  
The cool check will change to show ÒTOO WARMÒ  
very quickly after the door has been opened. It will  
however take a number of hours to return to black,  
indicating that the temperature is correct.  
The appliance should be left overnight and the cool  
check examined in the morning. If the cool check  
shows TOO WARM, turn the appliance to a colder  
setting leave overnight and examine again the  
following morning.  
Hints and Tips  
¥
¥
¥
The guide is only suitable for use in the model  
supplied.  
The guide will not operate in the freezer  
compartment.  
When cleaning the shelf take care not to immerse  
in water, and wipe away any spills.  
7
 
HINTS AND TIPS  
Food Storage  
Energy Saving Advice  
Do not install the appliance close to sources of  
heat, such as a boiler or radiator.  
¥
To obtain the best results from the appliance  
neither hot foods nor liquids which may  
evaporate, should be placed in the larder  
compartment.  
¥
¥
Locate the appliance in a cool well ventilated  
room and make sure that the air openings of the  
appliance are not obstructed.  
¥
¥
Keep the time between buying chilled food and  
placing it in your refrigerator as short as possible.  
¥
¥
Always leave warm food to cool down to room  
temperature before placing in the fridge.  
Do not push food together too much, try to allow  
air to circulate around each item.  
Try to avoid keeping the door open for long  
periods or opening the door too frequently as  
warm air will enter the cabinet and cause the  
compressor to switch on unnecessarily often.  
¥
¥
Do not store food uncovered.  
Remove suspect food from your refrigerator and  
clean, refer to Maintenance and Cleaning.  
¥
¥
Ensure there are no obstructions preventing the  
door from closing properly.  
It is advisable to peridocally clean the  
refrigeration system at the back of the appliance  
with a duster or vacuum cleaner.  
MAINTENANCE AND CLEANING  
Before any maintenance or cleaning work is carried  
Once or twice a year dust the condenser (black grill)  
and the compressor at the back of the appliance,  
with a brush or vacuum cleaner, see figure.  
out, DISCONNECT the appliance from the  
ELECTRICITY supply.  
Internal cleaning  
Clean the inside and accessories with warm water  
and bicarbonate of soda (5ml to 0.5 litre of water).  
Rinse and dry thoroughly.  
CONDENSER  
DEFROST  
TRAY  
NEVER USE DETERGENTS, ABRASIVE  
POWDERS, HIGHLY PERFUMED CLEANING  
PRODUCTS OR WAX POLISHES, TO CLEAN THE  
INTERIOR AS THESE WILL DAMAGE THE  
SURFACE AND LEAVE A STRONG ODOUR.  
COMPRESSOR  
D273  
External cleaning  
When the appliance is not in use  
Wash the outer cabinet with warm soapy water. Do  
NOT use abrasive products.  
When the appliance is not in use for long periods,  
disconnect from the electricity supply, empty all  
foods and clean the appliance, leaving the doors ajar  
to prevent unpleasant smells.  
An accumulation of dust will affect the performance  
of the appliance and cause excessive electricity  
consumption.  
8
 
Changing the light bulb  
Unscrew the light cover and then pull it outward  
toward the middle of the cabinet. Unscrew the bulb  
and replace it with a new 15 watt bulb (available  
from your nearest Service Force Centre).  
Replace the light cover by sliding it into its original  
position and replacing the screw.  
D411  
Cleaning the filter  
The filter is held by two small support frames which  
press into position and are therefore easily removed  
for cleaning. To do this, turn the glass shelf upside  
down and release the frames as shown in figure.  
The filters and the glass cover can be washed gently  
in warm soapy water, they should not be put in the  
dishwasher.  
Replacement filters can be purchased as a spare  
part from your local Zanussi Service Centre.  
D711  
Defrosting  
The refrigerator automatically defrosts every time the  
compressor stops. The water is discharged, via the  
pipe, into a tray located at the back of the appliance  
above the compressor, where it evaporates.  
Important  
To avoid defrost water overflowing into the fridge,  
periodically clean the water discharge hole in the  
centre of the V shaped drip collector at the back of  
the refrigerator compartment behind the salad  
crispers. Use the defrost cleaner provided which you  
will find already inserted into the discharge hole.  
D037  
Remember to wash the defrost cleaner in hot soapy  
water at regular intervals. Dry throughly before  
replacing.  
9
 
SOMETHING NOT WORKING  
If the appliance is not working correctly, please carry out the following checks before contacting your local  
Zanussi Service Force Centre  
Symptom  
Solution  
No power to the appliance  
Check there is power at the socket.  
Check there is not a power cut by checking the  
household lights.  
Check the fuse has not blown.  
The light does not come on  
The temperature in the fridge  
Ensure that the bulb is correctly fitted.  
Replace the bulb if it has blown.  
Check the door light switch is not jammed.  
Check the temperature in the fridge is turned to the  
correct setting relative to ambient conditions.  
Check the ambient temperature is within the  
applianceÕs operating limits of 10¡C to 32¡C.  
Relocate the appliance if necessary.  
The compressor runs continously  
Adjust the thermostat to give correct temperature  
control. See ÒSetting the temperatureÓ.  
Check that the door is closed.  
Large quantities of food have recently been placed in  
the cabinet/and or door is frequently opened.  
Check that air ventilation is not obstructed.  
Refer to normal operating sounds.  
Noise  
Water under the salad bin  
Check the drain hole is not blocked. (see  
Maintenance and Cleaning).  
If after the above checks your appliance still does  
not operate correctly, contact your local Zanussi  
Service Force Centre.  
In-guarantee customers should ensure that the  
above checks have been made, as the engineer  
will make a charge if the fault is not a mechanical  
or electrical breakdown.  
Please note that it will be necessary to provide proof  
of purchase for any in-guarantee service calls.  
10  
 
SERVICE AND SPARE PARTS  
In the event of your appliance requiring service, or if you wish to purchase spare parts, please contact your  
local Zanussi Service Force Centre by telephoning:-  
0870 5 929929  
Your telephone call will be automatically routed to the Service Force Centre covering your post code area.  
For further details please see the accompanying Customer Care Booklet.  
Before calling out an engineer, please ensure you have read the details under the heading ÔSomething Not  
Working?  
When you contact the Service Force Centre you will need to give the following details:  
1.  
2.  
3.  
4.  
5.  
Your name, address and post code  
Your telephone number  
Clear and concise details of the fault  
The model and serial number of the appliance (found on the rating plate)  
The purchase date  
CUSTOMER CARE DEPARTMENT  
For general enquiries concerning your Zanussi appliance or for further information on Zanussi products, please  
contact our Customer Care Department by letter or telephone as follows:-  
Customer Care Department  
Zanussi  
55-77 High Street  
Slough  
Berkshire  
SL1 1DZ  
Tel: 08705 727 727  
11  
 
GUARANTEE CONDITIONS  
Standard guarantee conditions  
We, Zanussi, undertake that if within 12 months of the date of the purchase this Zanussi appliance or any part  
thereof is proved to be defective by reason only of faulty workmanship or materials, we will, at our option repair  
or replace the same FREE OF CHARGE for labour, materials or carriage on condition that:  
The appliance has been correctly installed and used only on the electricity supply stated on the rating plate.  
The appliance has been used for normal domestic purposes only, and in accordance with the manufacturerÕs  
instructions.  
The appliance has not been serviced, maintained, repaired, taken apart or tampered with by any person not  
authorised by us.  
All service work under this guarantee must be undertaken by a Zanussi Service Force Centre. Any appliance or  
defective part replaced shall become the CompanyÕs property.  
This guarantee is in addition to your statutory and other legal rights.  
Home visits are made between 8.30am and 5.30pm Monday to Friday. Visits may be available outside these  
hours in which case a premium will be charged.  
Exclusions  
This guarantee does not cover:  
Damage or calls resulting from transportation, improper use or neglect, the replacement of any light bulbs or  
removable parts of glass or plastic.  
Costs incurred for calls to put right an appliance which is improperly installed or calls to appliances outside the  
European Community (EC) or European Free Trade Area.  
Appliances found to be in use within a commercial environment, plus those which are subject to rental  
agreements.  
Products of Zanussi manufacture which are not marketed by Zanussi.  
European Guarantee  
If you should move to another country within Europe then your guarantee moves with you to your new home  
subject to the following qualifications:  
The guarantee starts from the date you first purchased your product.  
The guarantee is for the same period and to the same extent for labour and parts as exists in the new country  
of use for this brand or range of products.  
This guarantee relates to you and cannot be transferred to another user.  
Your new home is within the European Community (EC) or European Free Trade Area.  
The product is installed and used in accordance with our instructions and is only used domestically, i.e. a  
normal household.  
The product is installed taking into account regulations in your new country.  
Before you move please contact your nearest Customer Care centre, listed below, to give them details of your  
new home. They will then ensure that the local Service Organisation is aware of your move and able to look  
after you and your appliances.  
France  
Germany  
Italy  
Senlis  
+33 (0)3 44 62 29 99  
+49 (0)911 323 2600  
+39 (0)1678 47053  
+46 (0)8 738 79 50  
+44 (0)1753 219 897  
NŸrnberg  
Pordenone  
Stockholm  
Slough  
Sweden  
UK  
12  
 
TECHNICAL SPECIFICATIONS  
DIMENSIONS  
Height  
124  
cm  
Width  
Depth  
54  
57  
cm  
cm  
POWER SUPPLY VOLTAGE AND FREQUENCY  
TOTAL POWER ABSORBED  
220-240 V / 50 Hz  
120 W  
AVERAGE DAILY UNITS ELECTRICITY *  
GROSS CAPACITY  
0.70 kWh  
230 l  
228 l  
NET CAPACITY  
* This figure is based on standard test results in accordance with European Standard EN 153.  
Actual consumption will depend on how the appliance is used and where it is located.  
13  
 
INSTALLATION  
Important  
IF YOU ARE DISCARDING AN OLD APPLIANCE  
THAT HAS A LOCK OR CATCH ON THE DOOR,  
YOU MUST ENSURE THAT IT IS MADE  
UNUSABLE TO PREVENT YOUNG CHILDREN  
BEING TRAPPED INSIDE.  
Depending upon the position which you choose for  
your appliance, you may wish to reverse the way in  
which the door opens. To do this, refer to instructions  
on ÒDoor reversalÓ.  
Please ensure that when the appliance is  
installed it is easily accessible for the engineer in  
the event of a breakdown.  
Positioning  
This appliance is designed to operate in ambient  
temperatures between 10¡C (50¡F) and 32¡C (90¡F).  
It should be located in a dry atmosphere, out of  
direct sunlight and away from extreme temperature  
e.g. not next to a boiler or radiator, or in a very cold  
room e.g. an outhouse, where the temperatures may  
fall below 10¡C (50¡F). If these temperatures are  
exceeded i.e. colder or warmer, then the appliance  
may not operate correctly.  
A
B
You should also ensure that air can circulate freely  
around the back and the top of the cabinet. There  
must also be at least 100 mm (4Ó) distance between  
the top of the cabinet and any overhanging kitchen  
furniture (A). Ideally, the appliance should not be  
positioned beneath overhanging furniture (B).  
NP007  
There should also be a gap of 25 mm either side of  
the appliance. Do not obstruct the space  
underneath. The back of the cabinet may be placed  
close to the wall but must not touch it. DO NOT  
install in places with restricted ventilation.  
Adjust the level of the appliance by screwing out the  
adjustable foot, or feet, at the bottom of the cabinet  
using your fingers.  
D200  
Rear spacers  
The plastic bag containing all relevant  
documentation also contains two spacers to be fitted  
into special holes in the back of the appliance.  
Fit the spacers into the holes, taking care to ensure  
that the arrow (A) is positioned as shown in the  
Figure. Then turn them through 45¡ (arrow (A)  
vertical) until they lock into place.  
A
45°  
PR60  
14  
 
For replacement, use a 13amp BSI362 fuse. Only  
ASTA or BSI approved fuses should be used.  
Electrical connections  
The plug must not be used if the fuse cover/carrier is  
lost. The cover/carrier is indicated by the coloured  
insert at the base of the plug.  
Any electrical work required to install this appliance  
should be carried out by a qualified electrician or  
competent person.  
A replacement cover/carrier must be obtained from  
your local Zanussi Service Force Centre whose  
address is listed in the Customer Care Booklet which  
accompanies your instruction manual.  
WARNING: THIS APPLIANCE MUST BE  
EARTHED.  
The manufacturer declines any liability should  
this safety measure not be observed.  
This appliance complies with the E.E.C. Directive  
No. 87/308 of 2.6.87 relative to radio interference  
suppression.  
If the plug that is fitted to your appliance is not  
suitable for your socket outlet, it must be cut off and  
the appropriate plug fitted.  
This appliance complies with the following  
E.E.C. Directives:  
Remove the fuse from the cut off plug.  
The cut off plug should then be disposed of to  
prevent the hazard of shocks in case it should be  
plugged into a 13amp socket in another part of your  
home.  
-
-
73/23 EEC of 19.2.73 (Low Voltage Directive)  
and subsequent modifications;  
89/336 EEC of 3.5.89 (Electromagnetic  
Compatibility Directive) and subsequent  
modifications.  
Important  
The wires in the mains lead are coloured in  
accordance with the following code:  
Green and Yellow  
Blue  
- Earth  
- Neutral  
- Live  
Brown  
If you fit your own plug, the colours of the wires in  
the mains lead of your appliance may not  
correspond with the markings identifying the  
terminals in your plug, proceed as follows:  
GREEN & YELLOW  
13 AMP. FUSE  
BROWN  
BLUE  
CORD CLAMP  
D207  
Connect the Green and Yellow (earth) wire to the  
terminal in the plug which is marked with the letter  
ÇEÈ or the earth symbol  
yellow.  
or coloured green and  
Connect the blue (neutral) wire to the terminal in the  
plug which is marked with the letter ÇNÈ or coloured  
black.  
Connect the brown (live) wire to the terminal in the  
plug which is marked with the letter ÇLÈ or coloured  
red.  
The plug moulded onto the lead incorporates a fuse.  
15  
 
Door reversal directions  
1. Disconnect from the electricity supply.  
1
3
2. Gently lay the fridge on its back with the top held  
away from the floor by 5-8 cm (2-3 inches) of  
packing;  
2
2
3. Remove the bottom hinge (3), pin (1) and screw  
(2);  
4. Slide out the fridge door from pin (D), unscrew the  
latter and then refit it on the opposite side;  
D299  
5. Unscrew the foot on the left side and refit it on the  
opposite side;  
6. Remove the two screws which mask the holes for  
fixing the hinge from the left hand side;  
7. Refit the door and the lower hinge (turning it  
180¡), the pin (1) and the screw (2) as shown in  
the Figure;  
D
8. Remove plugs, unscrew the handle and refit it on  
the opposite side.  
Important  
D590  
After completion of the door reversing operation,  
check that the door gasket adheres to the cabinet. If  
the ambient temperature is cold (i.e. in Winter), the  
gasket may not fit perfectly to the cabinet. In that  
case, wait for the natural fitting of the gasket or  
accelerate this process by heating up the part  
involved with a normal hairdryer on a low setting.  
D336  
Printed on recycled paper  
 
17  
 
18  
 
 
 

West Bend Fondue Maker ELECTRIC FONDUE POT User Manual
West Bend Juicer 7000 User Manual
Whirlpool Hot Tub 11 0086 11 User Manual
Whirlpool Range FES325RQ1 User Manual
Woodstock Lathe W1704 User Manual
Wyse Technology TV Mount Release 202 User Manual
Zanussi Dishwasher 531338 User Manual
Zanussi Freezer ZCF 220 User Manual
Zanussi Washer Dryer ZWD 1270 S User Manual
Zanussi Washer FCS 1020 C User Manual