Yamaha DVD VCR Combo DVD S530 User Manual

UCA  
DVD / VIDEO CD / CD PLAYER  
LECTEUR DE DVD  
DVD-S530  
OWNER’S MANUAL  
MODE D’EMPLOI  
STANDBY  
/ON  
 
FCC INFORMATION (for US customers only)  
1. IMPORTANT NOTICE: DO NOT MODIFY THIS UNIT!  
This product, when installed as indicated in the instructions contained in this manual, meets FCC requirements. Modifications not expressly  
approved by Yamaha may void your authority, granted by the FCC, to use the product.  
2. IMPORTANT: When connecting this product to accessories and/or another product use only high quality shielded cables. Cable/s supplied with this  
product MUST be used. Follow all installation instructions. Failure to follow instructions could void your FCC authorization to use this product in the  
USA.  
3. NOTE: This product has been tested and found to comply with the requirements listed in FCC Regulations, Part 15 for Class "B" digital devices.  
Compliance with these requirements provides a reasonable level of assurance that your use of this product in a residential environment will not  
result in harmful interference with other electronic devices. This equipment generates/uses radio frequencies and, if not installed and used accord-  
ing to the instructions found in the users manual, may cause interference harmful to the operation of other electronic devices. Compliance with  
FCC regulations does not guarantee that interference will not occur in all installations. If this product is found to be the source of interference,  
which can be determined by turning the product "OFF" and "ON", please try to eliminate the problem by using one of the following measures:  
Relocate either this product or the device that is being affected by the interference.  
Utilize power outlets that are on different branch (circuit breaker or fuse) circuits or install AC line filter/s.  
In the case of radio or TV interference, relocate/reorient the antenna. If the antenna lead-in is 300 ohm ribbon lead, change the lead-in to coaxial  
type cable.  
If these corrective measures do not produce satisfactory results, please contact the local retailer authorized to distribute this type of product. If you  
can not locate the appropriate retailer, please contact Yamaha Electronics Corp., 6600 Orangethorpe Ave. Buena Park, CA90622.  
The above statements apply ONLY to those products distributed by Yamaha Corporation of America or its subsidiaries.  
We Want You Listening For A Lifetime  
YAMAHA and the Electronic Industries Association's Consumer Electronics Group want you to get the most out of  
your equipment by playing it at a safe level. One that lets the sound come through loud and clear without annoying  
blaring or distortion - and, most importantly, without affecting your sensitive hearing.  
Since hearing damage from loud sounds is often undetectable until it is too late, YAMAHA and the Electronic  
Industries Association's Consumer Electronics Group recommend you to avoid prolonged exposure from excessive  
volume levels.  
For Customer Use:  
CAUTION- Visible and invisible laser  
radiation when open. Avoid exposure to beam.  
U.S.A. and Canada models  
Australia model  
Read carefully the information located at the rear panel of the  
player and enter below the Serial No. Retain this information for  
future reference.  
DANGER VISIBLE AND INVISLE LASER RADIATION  
WHEN OPEN. AVOID DIRECT EXPOSURE TO BEAM.  
CAUTION Visible and nvisible laser radiation  
-
when open. Avoid exposure to beam.  
MODEL NO. DVD S530  
120 VOLTS 20 WATTS 60Hz  
MADE IN CHINA  
Model No.  
Serial No. __________________________  
CLASS 1 LASER PRODUCT  
LASER KLASSE 1 PRODUKT  
LUOKAN 1 LASERLAITE  
KLASS 1 LASER APPARAT  
(Australia model)  
FOR CANADIAN CUSTOMERS  
To prevent electric shock, match wide blade of plug to wide slot and  
fully insert.  
This Class B digital apparatus complies with Canadian ICES-003.  
CAUTION  
Use of controls or adjustments or  
performance of procedures other than  
those specified herein may result in  
hazardous radiation exposure.  
This digital apparatus does not exceed the Class B limits for radio noise  
emissions from digital apparatus as set out in the Radio Interference  
Regulations of the Canadian Department of Communications.  
 
CAUTION: READ THIS BEFORE OPERATING YOUR UNIT.  
1
2
To assure the finest performance, please read  
this manual carefully. Keep it in a safe place for  
future reference.  
14 Do not attempt to modify or fix this unit.  
Contact qualifiedYAMAHA service personnel  
when any service is needed.The cabinet should  
never be opened for any reason.  
15 When not planning to use this unit for long  
periods of time (i.e., vacation), disconnect the AC  
power plug from the wall outlet.  
16 Be sure to read the “TROUBLESHOOTING”  
section on common operating errors before  
concluding that this unit is faulty.  
17 Before moving this unit, press STANBY/ON to  
set the unit in standby mode, then disconnect  
the AC power plug from the wall outlet.  
Install this unit in a well ventilated, cool, dry, clean  
place — away from direct sunlight, heat sources,  
vibration, dust, moisture, or cold. In a cabinet,  
allow about 2.5cm (1 inch) of free space all  
around this unit for adequate ventilation.  
Locate this unit away from other electrical  
appliances, motors, or transformers to avoid  
humming sounds.  
Do not expose this unit to sudden temperature  
changes from cold to hot, nor locate this unit in  
an environment with high humidity (i.e., a room  
with a humidifier) to prevent condensation inside  
this unit, which may cause an electrical shock, fire,  
damage to this unit, and/or personal injury.  
Avoid installing this unit in a location where  
foreign objects may fall onto this unit or where  
this unit may be exposed to liquid dripping or  
splashing. On the top of this unit, do not place:  
– Other components, as they may cause  
damage and/or discoloration on the surface  
of this unit.  
3
4
WARNING  
TO REDUCETHE RISK OF FIRE OR ELECTRIC  
SHOCK, DO NOT EXPOSETHIS UNITTO  
RAIN OR MOISTURE.  
5
NOTE:  
Pictures shown maybe different between countries.  
Never make or change connections with the power  
switched on.  
– Burning objects (i.e., candles), as they may  
cause fire, damage to this unit, and/or  
personal injury.  
When playing DTS encoded CDs, excessive noise  
will be heard from the analog stereo outputs.To  
avoid possible damage to the audio system, the  
consumer should take proper precautions when the  
analog stereo outputs of the player are connected to  
an amplification system.To enjoy DTS Digital  
Surround™ playback, an external 5.1-channel DTS  
Digital Surround™ decoder system must be  
connected to the digital output of the player.  
– Containers with liquid in them, as they may  
fall, spilling the liquid and causing an electrical  
shock to the user and/or damage to this unit.  
Do not cover this unit with a newspaper,  
tablecloth, curtain, etc. in order not to obstruct  
heat radiation. If the temperature inside this unit  
rises, it may cause fire, damage to this unit, and/or  
personal injury.  
6
LASER SAFETY  
7
8
9
Do not plug in this unit to a wall outlet until all  
connections are complete.  
Do not operate this unit upside-down. It may  
overheat, possibly causing damage.  
Do not use excessive force on switches, knobs  
and/or cords.  
This unit employs a laser. Due to possible eye injury,  
only a qualified service person should remove the  
cover or attempt to service this device.  
CAUTION  
10 When disconnecting the power cord from the  
wall outlet, grasp the plug; do not pull the cord.  
11 Do not clean this unit with chemical solvents; this  
might damage the finish. Use a clean, dry cloth.  
12 Use only the voltage specified on this unit. Using  
this unit with a higher voltage than specified is  
dangerous and may cause fire, damage to this  
unit, and/or personal injury.YAMAHA will not be  
held responsible for any damage resulting from  
use of this unit with a voltage other than as  
specified.  
VISIBLE AND INVISIBLE LASER RADIATION  
WHEN OPEN.AVOID EXPOSURETO BEAM  
(WARNING LOCATION: INSIDE ON LASER  
COVERSHIELD ORTHE BACKPLATE OF SET)  
LASER  
Type  
Wave length  
Semiconductor laser GaAlAs  
650 nm (DVD)  
780 nm (VCD/CD)  
7 mW (DVD)  
Output Power  
10 mW (VCD/CD)  
Beam divergence 60 degree  
13 To prevent damage by lightning, disconnect the  
power cord from the wall outlet during an  
electrical storm.  
 
Contents  
Introduction  
TruSurround and the SRS symbol are trademarks of  
SRS Labs., Inc.TruSurround technology is  
incorporated under license from SRS Labs., Inc.  
Environmental Information ------------------------ 2  
Supplied accessories -------------------------------- 2  
Notes about Discs ---------------------------------- 2  
Symbols Used in this Manual ----------------------2  
Functional Overview  
Front and Rear Panels ------------------------------ 3  
Remote Control ------------------------------------- 4  
Manufactured under license from Dolby  
Laboratories.Dolby” and the double-D symbol are  
trademarks of Dolby Laboratories.  
Preparation  
General Notes on connections ------------------- 5  
Digital Connections --------------------------------- 5  
Analog Connections-------------------------------- 5  
Video Connections ---------------------------------- 6  
Inserting batteries into the Remote Control --- 7  
NTSC/PAL Conversion ----------------------------- 7  
Turning on the power------------------------------- 7  
General Explanation--------------------------------- 7  
Menu Bars on video monitor ----------------------8  
User Preference Settings --------------------------- 8  
”DTS” and ”DTS Digital Out” are trademarks of  
DigitalTheater Systems, Inc.  
This product incorporates copyright protection  
technology that is protected by method claims of  
certain U.S. patents and other intellectual property  
rights owned by Macrovision Corporation and other  
rights owners. Use of this copyright protection  
technology must be authorized by Macrovision  
Corporation, and is intended for home and other  
limited viewing uses only unless otherwise  
Operation  
Basic Playback -------------------------------------- 12  
Playing a DVD-Video ------------------------------ 12  
Playing aVideo CD -------------------------------- 13  
Playing an Audio CD ------------------------------ 13  
Special DVD Features ----------------------------- 13  
SpecialVCD & SVCD Features ------------------ 14  
Special CD & MP3 Features --------------------- 14  
General Features ---------------------------------- 14  
MP3 Disc Features -------------------------------- 18  
authorized by Macrovision Corporation. Reverse  
engineering or disassembly is prohibited.  
Access Control  
DVD VCD  
Child Lock  
---------------------- 19  
DVD  
Parental Control  
------------------------- 19  
Troubleshooting  
Troubleshooting------------------------------------ 21  
Specifications  
Specifications --------------------------------------- 22  
1
 
Introduction  
Thank you for purchasing this unit.This Owner’s  
Manual explains the basic operation of this unit.  
Cleaning Discs  
When a disc becomes dirty, clean it with a  
cleaning cloth.Wipe the disc from the centre out.  
Do not wipe in a circular motion.  
Do not use solvents such as benzine, thinner,  
commercially available cleaners, or antistatic  
spray intended for analog records.  
The region code is 1  
for U.S.A and Canada  
1
4
models, 4 for the  
Australia model.  
Since it is usual for DVD movies to be released  
at different times in different regions of the  
world, all players have region codes and discs can  
have an optional region code.This unit can play  
discs containing the identical region code, or  
mentioned as region “ALL”. If you load a disc of a  
different region code to this unit, you will see the  
region code notice on the screen.The disc will  
not playback, and should be unloaded.  
Symbols Used in this Manual  
The below symbols appear in some headings  
and notes with the following meanings:  
– Description refers to playback of DVD-video  
discs  
DVD  
VCD  
– Description refers to playback ofVideo CDs  
Environmental Information  
CD  
– Description refers to playback of Audio CDs  
This unit consists of materials which can be  
recycled and reused if disassembled by a  
specialised company. Please observe the local  
regulations regarding the disposal of packaging  
materials, exhausted batteries and old  
equipment.  
Some DVD video discs require specific  
functions or allow only limited functions  
during playback.  
Ä“ may appears on the video monitor  
which means that the function is not  
available on that specific DVD video disc.  
Supplied accessories  
– Remote control  
– Batteries (two AA size) for remote control  
– Audio/Video cable  
– Owner’s Manual  
Notes about Discs  
– This unit is designed for use with DVD video,  
Video CD, Super video CD,Audio CD (CD text  
supported),CD-R and CD-RW (MP3 Supported),  
DVD+RW and DVD+R.  
– CD-R and CD-RW cannot be played unless  
finalized.  
– Only the first session of multisession discs is  
supported.  
– Some discs cannot be played depending on the  
disc characteristics or recording conditions.  
– Be sure to use only CD-R and CD-RW discs  
made by reliable manufacturers.  
– Do not use any non standard shaped discs  
(heart, etc.)  
– Do not use disc with tape, scals, or paste on it,  
damage to the unit may result.  
– Do not use a disc printed on its surface by a  
commercially available label printer.  
2
 
Functional Overview  
Front and Rear Panels  
STANDBY/ON  
– to turn this unit to standby mode or  
ON  
R/T  
– search forward* / go to the next  
chapter or track  
DiscTray  
S/Q  
– search backward* / go to a previous  
chapter or track  
/ OPEN/CLOSE  
– to open/close the disc tray  
9STOP  
– to stop playback  
B/ ; PLAY/PAUSE  
– to start/interrupt playback  
STANDBY  
/ON  
* Press button for about 2 seconds  
COAXIAL  
AC Power Cord  
– connect to DIGITAL INPUT of your AV  
receiver  
– connect to a standard AC outlet  
COMPONENTVIDEO OUT  
– connect to component video inputs of  
your AV receiver  
OPTICAL  
– connect to DIGITAL INPUT of your AV  
receiver  
S-VIDEO  
– connect to S-Video input of your AV  
receiver  
AUDIO OUT (Left/Right)  
– connect to AUDIO inputs of your AV  
receiver or stereo system  
SUBWOOFER  
VIDEO (VIDEO OUT)  
– connect to an active subwoofer  
– connect to Video inputs of your AV receiver  
1
2
VIDEO  
COAXIAL  
PCM  
OPTICAL  
DIGITAL  
R
L
SUBWOOFER  
S
VIDEO  
P
R
P
B
Y
DTS MPEG  
AUDIO OUT  
VIDEO OUT  
COMPONENT VIDEO OUT  
Caution: Do not touch the inner pins of the jacks on the rear panel. Electrostatic  
discharge may cause permanent damage to the unit.  
3
 
Functional Overview  
Remote Control  
|
RETURN/RESUME  
– go back to previous menu /  
continue playback after play  
was stopped  
POWER B/  
– turn this unit ON or go to  
standby-on mode  
POWER  
1
2
5
8
3
6
9
4
0-9 numeric buttons  
– select numbered items in a  
menu  
7
MENU  
– access menu of a DVD disc  
RETURN RESUME  
CD TEXT BIT RATE  
0
MENU  
ON SCREEN  
1 2 3 4  
– (left/right/up/down) select an  
item in the menu  
CDTEXT/BIT RATE  
– activate/deactivate CD text if  
available on the disc (audio  
CDs)  
– to display bit rate indicator  
during playback (DVD, SVCD)  
ENTER  
OK  
ENTER/OK  
– acknowledge menu selection  
STOP  
PLAY  
PAUSE  
SUBTITLE ANGLE ZOOM AUDIO  
REPEAT  
A
B
SHUFFLE SCAN  
S
– search backward* / go to a  
previous chapter or track  
ON SCREEN  
– access or remove player’s  
system menu  
DVD  
STOP ( 9)  
– stop playback  
T
– search forward* / next chapter  
or track  
PLAY ( B)  
– start playback  
SUBTITLE  
– subtitle language selector  
PAUSE ( ;)  
– pause playback temporarily /  
frame-by-frame playback  
ANGLE  
– select DVD camera angle  
REPEAT  
– repeat chapter, track, title, disc  
ZOOM  
– enlarge video image  
A-B  
AUDIO  
– audio language and format  
selector  
– repeat a specific segment  
SHUFFLE  
– play tracks in random order  
SCAN  
– play the first 10 seconds of each  
track/chapter within a disc  
* Press and hold button for about two seconds  
4
 
Preparation  
Note:  
General Notes on connections  
– If the audio format of the digital output does  
not match the capabilities of your receiver, the  
receiver will produce a strong, distorted sound or no  
sound at all. Make sure to select the appropriate  
audio format at menu screen included on the disc.  
Pressing AUDIO once or more may change not only  
audio languages but also audio formats, and the  
selected format appears for several seconds on the  
status window.  
Depending on the equipment you wish to  
connect, there are various ways you could  
connect this unit. Possible connections are shown  
in the following drawings.  
Please refer to the manuals of other equipment  
as necessary to make the best connections.  
Do not connect this unit via yourVCR.The video  
quality could be distorted by the copy  
protection system.  
– MP3 Audio is not available on the Digital  
Output.  
Do not connect this unit’s audio out jack to the  
phono in jack of your audio system.  
Analog Connections  
Digital Connections  
Use audio/video cable supplied with this unit to  
connect AUDIO OUT L (left) and R (right) jacks  
of this unit to corresponding input jacks of your  
audio equipment such as Stereo amplifier.You  
can connect a subwoofer to this unit’s  
SUBWOOFER jack.  
This unit has COAXIAL and OPTICAL digital  
out jacks. Connect one or both of them to your  
AV receiver equipped with Dolby digital, DTS, or  
MPEG decoder using each specific cable  
(separate purchase).  
1
2
1
2
VIDEO  
COAXIAL  
PCM  
OPTICAL  
DIGITAL  
R
DTS MPEG  
COAXIAL  
PCM  
OPTICAL  
DIGITAL  
R
L
SUBWOOFER  
S
VIDEO  
AUDIO OUT  
DTS MPEG  
AUDIO OUT  
VIDEO OUT  
C
O
R
L
COAXIAL  
IN  
OPTICAL  
IN  
(supplied)  
AV receiver  
Subwoofer  
Subwoofer  
R
L
Center speaker  
1
CD/DVD  
Stereo  
amprifier  
Left main  
speaker  
Right main  
speaker  
R
L
Left rear  
speaker  
Right rear  
speaker  
Left  
speaker  
Right  
speaker  
You will need to set this unit’s digital  
output to ALL (see ‘User Preference  
Settings’).  
5
 
Preparation  
ComponentVideo terminal <A>  
Component video connection achieves high  
fidelity in reproducing colors (better  
Video Connections  
If your AV receiver has video output jacks,  
connect your receiver (and then to yourTV) so  
that you can use oneTV for several different  
video sources (LD,VCR etc.) by simply switching  
the input source selector of your receiver.  
The player has three types of video output jacks.  
Use one of them in accordance with the input  
jacks of the equipment to be connected.  
performance than S-video connection),  
separating video signal into luminance (Y,  
terminal color-coded as green), and color  
difference (Pb, blue/Pr, red). Use commercially  
available coaxial cables. Receiver (andTV) with  
component input is required. Observe the color  
of each jack when connecting. If your receiver  
does not have component output jacks,  
connecting the player’s component output  
directly to yourTV’s component input can  
reproduce better video image.  
1
2
VIDEO  
R
L
SUBWOOFER  
S
VIDEO  
P
R
P
B
Y
OUT  
VIDEO OUT  
COMPONENT VIDEO OUT  
S-Video terminal <B>  
S (separate) video connection achieves a clearer  
picture than composite video connection by  
separating color and luminance when  
transmitting signals. Use commercially available S-  
video cable. Receiver (andTV) with  
(supplied)  
V
<C>  
<B>  
<A>  
S
Y
P
B
C
B
PRCR  
S-video input is required.  
VIDEO S VIDEO  
INPUT  
COMPONENT  
VIDEO IN  
CompositeVideo terminal (1, 2) <C>  
AV receiver  
Use audio/video cable supplied with this unit  
when connecting the player to aTV.  
VIDEO  
OUT  
COMPONENT  
VIDEO OUT OUT  
S VIDEO  
VIDEO 1, 2 jacks ofVIDEO OUT output the  
same signal.You can connect one to your  
receiver’s input using supplied Audio/Video cable,  
and the other to another receiver or aTV.  
VIDEO  
IN  
COMPONENT  
VIDEO IN  
S VIDEO  
IN  
6
 
Preparation  
Inserting batteries into the  
Remote Control  
NTSC/PAL Conversion  
This unit is equipped with an NTSC/PAL  
conversion feature that converts the video  
output of the disc to match yourTV system. To  
activate the conversion refer to page 9.  
1
2
Open the battery cover.  
Insert batteries (AA size) with the correct  
polarity as indicated by the + and - symbols  
inside the battery compartment.  
Close the cover.  
Turning on the power  
Connect the AC power cord to the power  
outlet.  
3
1
2
3
Turn on theTV and your AV receiver.  
Select the appropriate input source at the AV  
receiver that was used to connect to this unit.  
Refer to the equipment owner’s manual for  
detail.  
-
+
+
-
4
5
Turn this unit on.  
Set theTV to the correctVideo IN channel. (eg.  
EXT1, EXT2,AV1,AV2,AUDIO/VIDEO, etc.  
(Refer to yourTV owner’s manual for detail)  
The front display lights up and the default  
screen appears on theTV.  
CAUTION  
– Remove batteries if they are exhausted  
or not to be used for a long time.  
– Do not use old and new or different  
types of batteries in combination.  
– Batteries contain chemical substances, so  
they should be disposed off properly and  
kept away from children.  
General Explanation  
About this Manual  
This manual gives the basic instructions for  
operating this unit. Some DVDs require specific  
operation or allow only limited operation during  
playback which may not respond to all operating  
commands.When this occurs, the symbol Ä  
appears on the video monitor, indicating that the  
operation is not permitted by this unit or the  
disc.  
Using the Remote Control  
Direct the remote control at the remote sensor  
of this unit.  
Do not drop the remote control.  
Do not leave the remote control near extremely  
hot or humid place.  
Do not spill water or put anything wet on the  
remote control.  
Remote control operation  
Unless stated, all operations can be carried out  
with the remote control.Always point the  
remote control directly at the player, making sure  
there are no obstructions in the path of the  
infrared beam.  
Corresponding buttons on the front panel can  
also be used.  
7
 
Preparation  
Menu Bars on video monitor  
User Preference Settings  
Operations can be carried out directly via the  
multiple menu bars on the video monitor.  
The following functions are available via the  
menu bars. Pressing ON SCREEN repeatedly will  
toggle through menu bar 1, menu bar 2, menu  
bar 3 and menu bar OFF:  
In the User Preference Settings menu, you can  
customize this unit to suit your own particular  
requirements.  
General operation:  
Press ON SCREEN.  
1
2
3
The  
will be highlighted in the menu bar.  
Menu bar 1  
Press 4to activate the User Preference Settings  
menu.  
4
5
Use 1234to toggle through the functions and  
select your preferred option.  
Press ENTER/OK to confirm a highlighted  
selection.  
From the left,  
User Preference Settings ●  
Current Subtitle Language ●  
Current Audio Language Smart Color ●  
Sound Mode  
The following items are available:  
Picture  
Menu bar 2  
– TV Shape  
Select the aspect ratio of theTV to be  
connected.  
4:3 letterbox when you connect a normal  
TV. Displays a wide picture with bands displayed  
on the upper and lower portions of the video  
monitor.  
From the left,  
Frame by Frame Slow Motion Scan Speeds  
Camera Angle Enlarge Picture  
Menu bar 3  
4:3 panscan when you connect a normalTV.  
Displays the wide picture on the whole video  
monitor with a portion automatically cut off.  
16:9 when you connect a wide-screenTV.  
From the left,  
Title Chapter Time Search ●  
FavoriteTrack Selection  
4:3  
letterbox  
Temporary Feedback Field Icons  
These icons will appear temporarily on the top  
left hand corner of your video monitor.  
4:3  
panscan  
Scan  
Repeat A to end  
Repeat A–B  
Angle  
Repeat All  
RepeatTitle  
RepeatTrack  
Repeat Chapter  
Shuffle  
1/3  
16:9  
Child Lock On  
Child Safe  
Note:  
Resume  
– Panscan is subject to availability on the disc.  
Shuffle Repeat  
Action Prohibited  
8
 
Preparation  
– Black level shift (NTSC output only)  
– Color settings (Smart Color)  
Select On for adapting the color dynamics to  
obtain richer contrasts.  
You can select one of four predefined sets of  
color settings and one set (Personal) which you  
can define yourself.  
You can also switch the settings by accessing the  
in the menu bar.  
– MonitorType  
Allows you to select the type of display device  
that is connected to this unit.  
In each device, a set of predefined Color settings  
is available or choose Personal that allows you to  
select the color settings according to your  
preference.  
When Personal is selected, it allows you to fine-  
tune saturation, brightness and contrast.  
Use 3or 4to adjust the values of these  
parameters.  
– TV System (NTSC/PAL Conversion)  
Allows you to select between PAL, NTSC and  
AUTO mode depending on yourTV.  
The conversions supported are as follows:  
Disc  
Output format  
Selected mode  
Type  
DVD  
Format  
NTSC  
PAL  
AUTO  
NTSC  
PAL 60  
NTSC  
PAL  
NTSC  
– Video shift  
Not  
PAL  
PAL 60  
PAL  
PAL  
Supported  
Use this setting to personalize the position of  
the picture on yourTV by scrolling it to the left  
or right.  
VCD  
NTSC  
NTSC  
NTSC  
PAL  
NTSC  
PAL  
Press 3or 4to select PAL, NTSC or AUTO.  
Notes:  
– AUTO can only be selected when using aTV  
that has both the NTSC and PAL systems.  
– Slight picture distortions may occur due to this  
conversion.This is normal.Thus, the AUTO format is  
most suitable for the best picture quality.  
9
 
Preparation  
– Karaoke vocal  
Sound  
Put this setting to On only when a multi-channel  
karaoke DVD is being played.The karaoke  
channels on the disc will then be mixed into a  
normal stereo sound.  
– Digital output  
Digital output selection enables you to specify  
the type of digital output suitable for your  
receiver.  
– Sub-woofer Cut-off  
Select All (default setting), if you had connected  
your COAXIAL / OPTICAL AUDIO OUT to a  
multichanel decoder receiver.  
Select PCM only if your receiver is not capable  
of decoding multichannel audio.  
The frequency of the subwoofer output can be  
set to High (200Hz) or Low (100Hz) to match  
your system’s playback sound quality.  
Select Off to deactivate the COAXIAL /  
OPTICAL AUDIO OUT.  
– PCM Output  
Allows to select PCM digital output between  
48kHz and 96kHz.When 48kHz has been  
selected, 96kHz (if available on disc) PCM data  
stream will be converted to 48kHz.  
Some 96kHz DVD are copy protected. If your  
PCM output selection is 96kHz, the digital output  
will be muted to comply with the standards.  
Select 48kHz to enable digital output.  
– Analog output  
Select Stereo, Dolby Surr-compat (Dolby  
Surround compatible) or 3D Sound  
(Trusurround) output to match your system’s  
playback capability.  
– Night Mode  
When set to On, the dynamics of your sound  
output are optimized. High volume outputs are  
softened, enabling you to watch your favorite  
action movie, etc. without disturbing others.  
10  
 
Preparation  
– PBC (Playback Control - forVCD)  
Language  
The Playback Control can be set to On or Off.  
Selecting disc languages:  
– Beeper  
Menu/Audio/Subtitle language  
The beeper can be set to On or Off.  
This is to select the audio language, subtitle  
language and the language used in video monitor  
menus or DVD menus which will always be used  
for every disc to be played back.  
If the language selected is not available on the  
disc, the original language designated by each  
disc will be selected.  
– Help text  
When set to On, help text describes the icons  
selected. Select Off if you no longer require the  
help text.  
– Smart Power-off  
Features  
Puts this unit to standby after a predefined time.  
This can be set to Enabled or Disabled.  
– Access control  
Access control contains the following features:  
Child Lock - When Child Lock is set to on, a 4-  
digit code needs to be entered in order to play  
discs.  
Parental level - Allows the conditional  
presentation of DVDs containing Parental  
Control information (see page 19 and 20,  
‘Access Control’ section).  
– Status window  
Displays the current status of this unit and  
appears with the menu bar. When disc playback  
is stopped, it is displayed with the ‘Temporary  
Feedback Field’ in the default screen.  
Factory setting is On. Select Off to suppress  
display of the Status window.  
11  
 
Operation  
Basic Playback  
Playing a DVD-Video  
1
2
Press STANDBY/ON on the front panel.  
Press /(OPEN/CLOSE) on the front panel to  
open disc loading tray.  
DVD video discs may have one or moreTITLES,  
and eachTITLE may have one or more  
CHAPTERS.  
3
4
Place the chosen disc in the tray, with the label  
facing up.  
Press /(OPEN/CLOSE) again to close the tray.  
READING appears on the front display, and  
playback starts automatically.  
Playback stops at the end of eachTITLE.  
DVD-VIDEO DISC  
TITLE 1  
TITLE 2  
CHAPTER 1 CHAPTER 2 CHAPTER 1 CHAPTER 2  
CHAPTER 3  
Playing a title  
1
2
Insert a disc and close the tray, playback starts  
automatically.  
TheVideo monitor’s and display shows the  
type of disc loaded, disc’s information and playing  
time.  
When the disc menu appear on the video  
monitor, use 4312or numeric buttons on the  
remote control to select an option and continue  
playback.  
If the titles are numbered , press the numeric  
buttons or use 43to select desired title in the  
menubar.  
F
Notes:  
– DVDs may have a region code.This unit will not  
play discs that have a region code different from  
the region code of this unit.  
– If ‘Child Lock’ is set to ON and the disc inserted  
is not authorized, the 4-digit code must be entered  
and/or the disc must be authorized (see Access  
Control).  
3
4
To stop playback, press STOP.  
Resume  
In stop mode and when a disc has not been  
ejected,  
Pressing PLAY will automatically resume  
playback from the point where the playback was  
last stopped.  
To deactivate resume,  
Press STOP to stop playback.  
The help line text appears “Press Stop again  
to start from beginning” for 5 seconds.  
Press STOP again or unload the discs, the  
resume is canceled.  
To activate resume,  
Reload the disc and press PLAY.  
Playback starts from the begining of the title.  
When resume icon .appears on the screen,  
press PLAY again.  
Playback will resume from the point where  
the playback was last stopped.  
Note:  
– Resume feature is also applicable toVCDs and  
SVCDs when Playback control is turned off.  
12  
 
Operation  
Playing a disc  
Playing aVideo CD  
1
Insert a disc and close the tray, playback starts  
automatically.  
The video monitor will display the number of  
tracks for selection and current playing status.  
Playback will stop at the end of the disc.  
To stop playback, press STOP.  
Video CDs may have one or moreTRACKS, and  
TRACKS may have one or more INDEXES.  
To make easy and convenient access, you can  
move betweenTRACKS and INDEXES.  
SomeVideo CDs have Play Back Control (PBC),  
which is a predefined playback sequence stored  
on the disc (see Playback Control).  
2
3
Special DVD Features  
VIDEO CD  
TRACK 1  
INDEX 2  
TRACK 2  
INDEX 2 INDEX 3  
DVDs may contain menus to navigate the disc  
and access special features. Press the appropriate  
numeric buttons or use 4, 3, 2, 1to highlight  
your selection in the DVD menu and press  
ENTER/OK to confirm.  
INDEX 1  
INDEX 1  
Playing a disc  
Title/Disc menu  
Press MENU.  
1
2
Insert the disc and close the tray, playback starts  
automatically.  
The number of tracks of the disc will appear  
on theVideo monitor and the front display.  
Press PLAY.  
The current track number and its elapsed  
playing time will be displayed.  
Playback will stop at the end of the disc.  
To stop playback, press STOP.  
1
If the current title has a menu, the menu will  
appear on the screen. Otherwise, the disc menu  
will be displayed.  
If disc menu is available on the disc, audio  
language, subtitle options, chapters for the title  
and other options will appear for selection.  
To remove the title/disc menu, press MENU  
again.  
2
3
3
4
5
Resume feature is also applicable forVCDs and  
SVCDs (see Resume section).  
Camera Angle  
Some discs contain scenes which have been shot  
simultaneously from various angles.  
This unit allows you to select the desired camera  
angle.  
Playing an Audio CD  
Audio CDs contain onlyTRACKS.  
They can be played on this unit with the audio  
output connected to a stereo system or to your  
TV.  
If CD-text is available on the disc, it will be  
display on both theVideo monitor and the front  
display.  
Select tracks using the menubar on theVideo  
monitor or by pressing the numeric buttons  
directly.  
This unit also allows you to compile Favorite  
Track Selection (FTS) programs for your discs by  
selecting or excluding tracks of your choice (see  
FTS Program - Audio CDs).  
When this unit encounters a scene shot in  
multiple angles, it will give an indication on the  
Temporary Feedback Field.”  
The angle icon remains displayed until  
multiple angles are no longer available.  
Use 3/4to select the required angle.  
Playback changes to the selected angle.  
You can also select } in the menu bar or press  
ANGLE on the remote control directly.  
Changing the audio formats and/or  
language  
AUDIO CD  
1
2
Select Y in the menu bar or press AUDIO on  
the remote control directly.  
Press AUDIO or 3/4repeatedly to select the  
different formats and/or languages.  
TRACKS  
1
2
3
4
5
6
7
8
9
10 11 12 ...  
13  
 
Operation  
Subtitles  
Select Z in the menu bar or press SUBTITLE  
on the remote control directly.  
Press SUBTITLE or 3/4repeatedly to select the  
different subtitles.  
General Features  
Note:  
– Unless stated, all operations described are  
based on remote control use. Some operations can  
be carried out using the menu bar on theVideo  
monitor.  
1
2
SpecialVCD & SVCD Features  
Playback Control (PBC)  
Moving to another title/chapter  
DVD VCD  
1
2
Load aVideo CD with PBC and press PLAY.  
Go through the menu with the buttons indicated  
on theVideo monitor until your chosen passage  
starts to playback. If a PBC menu consists of a list  
of tracks, you can select a track directly.  
Enter your choice with the numeric buttons.  
Press RETURN/RESUME to go back to the  
previous menu, if applicable on the menu.  
You may also select PBC off under Personal  
Preferences.  
When a disc has more than one title/track or  
chapter, you can move to another title/chapter as  
follows:  
Press ON SCREEN, then select W or X in the  
menu bar.  
1
2
3
4
Press 34or numeric buttons to select a title/  
chapter.  
CD  
5
1
Press Tor Sbriefly during playback to go  
to the next track or to return to the beginning  
of the currect track respectively.  
When set to off, PBC menus are not  
activated for further playback.  
Note:  
2
3
Press Stwice briefly to step back to the  
previous track.  
To go directly to any track, enter the track  
number using the numeric buttons.  
When PBC is on, you cannot operate resume,  
shuffle, repeat,A-B repeat, scan, time search and  
FTS.  
Note:  
Special CD & MP3 Features  
CD text and MP3 text  
Some CD or MP3-CD discs may contain text  
information (eg. track name, album name, artist  
name etc.) which will appear on the front display  
and video monitor during playback.  
By default, CD text display is set to ON.  
To switch off the CD text display, press CD  
TEXT/BIT RATE during playback.  
Press CDTEXT/BIT RATE again to switch on the  
text display mode.  
– Long press of the Tor Swill switch on  
backward or forward search (see serch section).  
Search  
DVD VCD  
1
1
2
Select  
in the menu bar and press 4.  
Use 1/2to select the required speed: –32, –8 or  
–4 (backward), or +4, +8, +32 (forward).  
Select 1 or press PLAY to play the disc at normal  
speed again.  
2
3
3
4
To exit the search mode, press 3.  
(Playback continues at the selected speed.)  
CD  
To search forward or backward through different  
speeds, you can also hold down Tor S  
for more than two seconds.  
14  
 
Operation  
Repeat  
DVD  
DVD VCD  
Slow Motion  
1
2
Select  
in the menu bar and press 4.  
Playback will pause.  
Use 1/2to select the required speed: –1, –1/2,  
–1/4 or –1/8 (backward), or +1/8, +1/4, +1/2 or  
+1 (forward).  
Repeat chapter/title/disc  
Each time you press REPEAT, the front display  
changes as follows;  
REPEAT CHPT  
REPEAT OFF  
REPEATTITL  
REPEAT DISC  
3
4
Select 1 or press PLAY to play the disc at normal  
speed again.  
If ;is pressed, the speed will be set to zero  
(PAUSE).  
REPEAT CHPT*: repeat the current chapter  
REPEATTITL: repeat the current title  
REPEAT DISC*: repeat the entire disc  
REPEAT OFF: exit repeat mode  
* This feature may not be available with some  
discs.  
To exit the slow motion mode, press 3.  
(Playback continues at the selected speed.)  
Still Picture and Frame-by-frame  
playback  
1
2
Select  
Playback will pause.  
Use 1/2to select the previous or next picture  
frame.  
in the menu bar and press 4.  
VCD CD  
Repeat track/disc  
Each time you press REPEAT, the front display  
changes as follows;  
Press PLAY to play the disc at normal speed  
again.  
REPEATTRK  
REPEAT DISC  
Note:  
– You can also activate frame-by-frame playback  
by pressing PAUSE repeatedly.  
REPEAT OFF  
REPEATTRK: repeat the current track  
REPEAT DISC: repeat the entire disc  
REPEAT OFF: exit repeat mode  
DVD VCD  
CD  
Scan  
Scanning plays the first 10 seconds of each  
chapter/track on the disc.  
DVD VCD  
CD  
Repeat A-B  
1
2
Press SCAN.  
To continue playback at your chosen chapter/  
track, press SCAN again or press PLAY.  
– DVD-Video Discs: repeat a sequence in a  
title  
– Video and Audio CDs: repeat a sequence  
in a track  
1
2
Press A-B at your chosen starting point.  
Press A-B again at your chosen end point.  
REPEAT A B appears briefly on the front  
display, and the repeat sequence begins.  
To exit the sequence, press A-B.  
3
15  
 
Operation  
Shuffle  
DVD  
DVD VCD  
Zoom  
The Zoom function allows you to enlarge the  
video image and to pan through the enlarged  
image.  
This shuffles the playing order of chapters within  
a title, if the title has more than one chapter.  
1
2
Press SHUFFLE during playback.  
SHUFFLE appears on the front display for  
about two seconds.  
1
2
Select  
in the menu bar.  
Press 3/4to activate the zoom function and  
select the required zoom factor: 1.33 or 2 or 4.  
Playback will continue.  
The selected zoom factor and ‘Press OK to  
pan’ appears below the menu bar.  
To return to normal playback, press Shuffle again.  
VCD CD  
This shuffles the playing order of tracks within a  
disc , if the disc has more than one tracks.  
Press SHUFFLE during playback.  
SHUFFLE appears on the front display for  
about two seconds.  
The zoomed picture will appear on the video  
monitor.  
1
2
3
Press ENTER/OK to confirm the selection.  
The panning icon appears on the screen.  
Use 1234to pan across the screen.  
When ENTER/OK is pressed only the panned  
picture will be shown on the screen.  
To exit zoom mode, select zoom factor to “Off”  
(zoom factor 1) in the menu bar.  
4
5
To return to normal playback, press SHUFFLE  
again.  
6
DVD VCD  
Time search  
TheTime Search function allows you to start  
playing at any chosen time on the disc.  
Select in the menu bar and press 4.  
Playback will pause.  
The elapsed playing time is displayed in a  
time edit box.  
Enter hours, minutes and seconds from left to  
right in the time edit box using the numeric  
buttons.  
1
2
FTSVideo/Audio Program  
FavoriteTrack Selection (FTS) list contains up to  
20 items (titles, chapters).  
The most recent program list will be placed on  
top of the existing list.  
Each time an item has been entered, the  
next item will be highlighted.  
Press ENTER/OK to confirm the selected time.  
The time edit box will disappear and playback  
starts from the selected time position on the  
disc.  
3
* This feature may not be available with some  
discs.  
DVD VCD  
Storing a Program  
1
2
off  
1
2
Select c in the menu bar.  
Press 4to open the menu bar.  
The FTS (FavoriteTrack Selection) menu  
appears.  
0:00:34  
4
Press ON SCREEN to remove the menu bar.  
16  
 
Operation  
Storing titles/tracks  
Erasing all selections  
1
2
3
Press 3/4to selectTitle/Track.  
Use 2and 1to select the require title/tracks.  
Press ENTER/OK to store the entire selected  
title/tracks.  
The title number will be added to the list of  
selections.  
1
2
Select c in the menu bar.  
Use 4to select Clear all and press ENTER/OK.  
All selections will be erased.  
3
Press ON SCREEN to exit.  
Storing chapters/indexes  
1
2
Press 3/4to select Chapter/Index.  
Use 2and 1to select the required chapter  
number.  
The chapter/indexes number will be  
highlighted.  
3
4
Press ENTER/OK to confirm the selection.  
The selected chapter/indexes number will be  
added to the list of selections.  
Switching a Program ON/OFF  
1
2
Press 3to select FTS.  
Press 2or 1to select either ON or OFF.  
Press ON SCREEN to exit the FTS menu.  
CD  
Bit Rate Indicator  
Storing a Program  
Press the CDTEXT/BIT RATE to activate the bit  
rate indicator.When activated, the bit rate for  
video and audio, as well as the total bit rate is  
displayed.This is only applicable during playback  
of DVD and SVCD discs.  
1
2
3
Load a disc and stop playback.  
Press 4to go to the list of available tracks.  
Use 2and 1to select the required tracks or  
directly using the numeric buttons.  
Press ENTER/OK to store the selected tracks.  
The track number will be added to the list of  
selections.  
4
DVD VCD CD  
Erasing a selection in a Program  
1
2
3
4
5
Select c in the menu bar.  
Use 4to select Program.  
Use 2and 1to select the required number.  
Press ENTER/OK to erase the selection.  
Press ON SCREEN to exit.  
17  
 
Operation  
Album/Title  
MP3 Disc Features  
This feature allows you to view and select the  
next or previous MP3 disc Album/Title.  
Press 3/4to scroll through the previous or next  
Album.  
Press 1/2to scroll through the previous or next  
Track.  
Support following MP3-CD formats  
(ISO9660 format):  
1
2
3
Max. 30 characters (file names or directory)  
Max. nested directory is 8 levels  
The max. album (directory) number is 32  
SupportedVBR bit-rate  
Supported sampling frequencies for MP3 disc  
are: 32 kHz, 44.1 kHz, 48 kHz  
You can also select the desired album/track  
number directly using the numeric buttons.  
Note:  
Supported Bit-rates of MP3 disc are: 32, 64, 96,  
128, 192, 256 (kbps)  
– In STOP mode: numbers are used for album  
selection.  
– In PLAY mode: numbers are used for track  
selection.  
Following formats can’t be supported  
The files like *.WMA, *.AAC, *.DLF, *.M3U, *.PLS  
Chinese filenames  
The non-session closed discs  
Only the following functions are possible for  
MP3 discs:  
– STOP / PLAY / PAUSE  
– SKIP NEXT / PREVIOUS  
– REPEAT (TRACK / ALBUM / DISC)  
The discs recorded under UDF format  
Downloading MP3 files from the Internet or  
copying songs from your own legal discs is a  
delicate process.  
Repeat track/album/Disc  
Each time you press REPEAT, the front display  
changes as follows;  
Approximate total  
MP3-CD time  
Approximate  
Reduction Ratio  
Sound  
Quality  
Comment  
Bit Rate  
Sound quality significantly affected  
– not recommended.  
AM radio  
32 kbps  
64 kbps  
40 : 1  
20 : 1  
15 : 1  
10 : 1  
5 : 1  
40 hrs  
20 hrs  
15 hrs  
10 hrs  
5 hrs  
FM radio  
Near-CD  
CD-like  
CD*  
Balanced sound quality  
– compression rate  
REPEATTRK  
REPEAT OFF  
REPEAT ALBM  
REPEAT DISC  
96 kbps  
128 kbps  
256 kbps  
320 kbps  
Compression rate low  
– suggest to play CDs instead  
CD*  
3 : 1  
3 hrs  
REPEATTRK: repeat a track  
You may experience an occasional “skip”  
while listening to your MP3 files.This is  
normal.  
REPEAT ALBM: repeat an album  
REPEAT DISC: repeat the entire disc  
REPEAT OFF: exit repeat mode  
Additional note for MP3 disc Playback:  
– In compliance with the SDMI, digital-out is  
muted while playing MP3 discs.  
– Due to the recording nature of Digital Audio  
MP3 (DAM),only Digital Audio music will play.  
– The disc reading time may exceed 10  
seconds due to the large number of songs  
compiled onto one disc.  
– Only the first session of multisession discs is  
supported.  
– Some MP3 discs cannot be played depending  
on the disc characteristics or recording  
conditions.  
18  
 
Access Control  
– Double-sided DVDs and multi-volumeVCDs may  
have a different ID for each side. In order to make  
the disc ‘child safe’, each side has to be authorized.  
DVD VCD  
Child Lock  
Activating/deactivating the Child  
Lock  
1
When disc playback is stopped, select Access  
control in the User Preference Settings menu  
using 3/4.  
2
3
4
5
6
Enter a 4-digit code of your own choice twice.  
Move to “Child lock” using 3/4.  
Move to Ç / É using 2.  
Select Ç using 3.  
Press ENTER/OK or 1to confirm, then press  
ON SCREEN to exit the User Preference  
Settings menu.  
Now unauthorized discs will not be played  
unless the 4-digit code is entered.  
Select É to deactivate the child lock.  
Deauthorizing discs  
Insert the disc.  
Playback starts automatically.  
Press 9while { is visible.  
The | will appear and the disc is now  
deauthorized.  
1
2
7
Notes:  
Notes:  
Confirmation of the 4-digit code is necessary when:  
– The code is entered for the very first time (see  
above),  
– The code is changed or canceled (see ‘Changing  
the 4-digit code’),  
Playback continues even after you have  
deauthorized the disc. Press 9if you want to stop  
it.  
DVD  
Parental Control  
Movies may contain scenes not suitable for  
children.Therefore, discs may contain ‘Parental  
Control’ information which applies to the  
complete disc or to certain scenes on the disc.  
These scenes are rated from 0 to 8, and  
alternative, more suitable scenes are available on  
the disc. Ratings are country dependent.The  
‘Parental Control’ feature allows you to prevent  
discs from being played by your children or to  
have certain discs played with alternative scenes.  
Authorizing discs  
Insert the disc.  
The ‘child safe’ dialog will appear.  
You will be asked to enter your secret code for  
‘Play once ‘or ‘Play always.’  
1
2
1en  
1en  
1
2
If ‘Play once’, disc can be played when in this unit  
and this unit is turned on.  
If ‘Play always’, disc will become authorized and  
can always be played, even if the child lock is set  
to on.  
Access control  
[ ] [ ] [ ]  
Enter code  
Notes:  
– This unit memory can maintain 80 authorized  
(‘child safe’) disc titles.A disc will be placed in the  
list whenPlay alwaysis selected.  
– Each time a ‘child safe’ disc is played, it will be  
placed on top of the list.When the list is full, the  
last disc in the list will be replaced when a new disc  
is added.  
19  
 
Access Control  
Activating/Deactivating Parental  
Control  
When disc playback is stopped, select Access  
control in the User Preference Settings menu  
using 3/4.  
Changing the 4-digit code  
1
When disc playback is stopped, select Access  
control in the User Preference Settings menu  
using 3/4.  
Enter the current 4 digit code.  
Move to Change code using 4and press 2.  
Enter the new 4-digit code.  
Enter the code a second time.  
Press 1to exit the menu.  
The new 4 digit code will take effect.  
1
2
2
3
4
5
6
Enter your 4-digit code. If necessary, enter the  
code a second time.  
3
4
5
Move to Parental level using 3/4.  
Move to value adjustment (‘– –’ -8) using 2.  
Then use 3/4or the numeric buttons on the  
remote control to select a rating from 0 to 8 for  
the disc inserted.  
If you forget your 4 digit code  
Rating 0 (displayed as ‘– –’):  
Parental control is not activated.The disc will be  
played in full.  
1
2
Press 9to exit the ‘Child Safe’ screen.  
Select Access control in the User Preference  
Settings menu using 3/4.  
3
4
The 4-digit code can be canceled by pressing 9  
four times in the ‘Access control’ dialog.  
You can then enter a new code (twice!) as  
described above in ‘Changing the 4 digit code’.  
Ratings 1 to 8:  
The disc contains scenes not suitable for children.  
If you set a rating, all scenes with the same rating  
or lower will be played. Higher rated scenes will  
not be played unless an alternative which has the  
same rating or lower is available on the disc. If no  
suitable alternative is found, playback will stop  
and the 4-digit code has to be entered.  
Parental Control Disclaimer  
This unit features the parental control system  
which is to activate when playing DVD discs  
furnished with certain software coding only.  
Also note that at the time of release of this unit  
certain aspects of the technical standards had  
not been settled between set makers and the  
disc industries.  
6
Press ENTER/OK or 1to confirm, then press 1  
again to exit the User Preference Settings menu.  
On this basis,YAMAHA cannot guarantee the  
functioning of the parental control system and  
denies any liability associated with unintended  
watching of disc content.  
If in doubt, please make sure the disc plays  
according to your parental control settings  
before you allow children access to this unit.  
Country  
1
When disc playback is stopped, select Access  
control in the User Preference Settings menu  
using 3/4.  
2
3
4
5
6
Enter the 4-digit code.  
Move to Change country using 3/4.  
Press 2.  
Select a country using 3/4.  
Press ENTER/OK or 1to confirm, then press 1  
again to exit the menu.  
20  
 
Troubleshooting  
Refer to the chart below when this unit does not function properly. If the problem you are  
experiencing is not listed below or if the instruction below does not help, set this unit to the  
standby mode, disconnect the power cord, and contact the nearest authorizedYAMAHA dealer  
or service center.  
Problem  
Solution  
No power  
Check if the AC power cord is properly connected.  
Press Standby-On button on this unit.  
No picture  
Check if theTV is switched on.  
Check the video connection.  
Distorted picture  
Check the disc for fingerprints and clean the disc  
with a soft cloth, wiping from the centre to the edge.  
Sometimes a small amount of picture distortion may  
appear.This is not a malfunction.  
Completely distorted picture or  
black/white picture with DVD  
orVideo CD  
Make sure the NTSC/PAL setting at this unit matches  
the video signal of your television.  
(See NTSC/PAL Settings)  
The disc format does not match yourTV’s video  
signal (PAL/NTSC).  
No sound or distorted sound  
No audio at digital output  
Adjust the volume.  
Check that the speakers are connected correctly.  
Select another audio language (if available on the  
DVD video disc)  
Check the digital connections.  
Check the settings menu to make sure the digital  
output is set to All or PCM only.  
Check if the audio format of the selected audio  
language matches your receiver capabilities.  
MP3 Audio is not available on the Digital Output.  
Disc can’t be played.  
Ensure the disc label is facing up.  
Clean the disc.  
Check if the disc is defective by trying another disc.  
Check if the disc is badly scratched or warped (not flat).  
Check the disc for the correct region code.  
Picture freezes momentarily  
during playback  
Check the disc for fingerprints/scratches and clean  
with a soft cloth wiping from centre to edge.  
No return to start-up screen when  
disc is removed  
Reset the unit by switching this unit off, then on  
again.  
This unit does not respond to  
the remote control.  
Aim the remote control directly at the sensor on  
the front of this unit.  
Reduce the distance to this unit.  
Replace the batteries in the remote control.  
Re-insert the batteries with their polarities (+/–  
signs) as indicated.  
Buttons do not work or this unit stops  
responding.  
To completely reset this unit, unplug the AC  
cord from the AC outlet for 5-10 seconds.  
This unit does not respond to some  
operating commands during playback.  
Operations may not be permitted by the disc.  
Refer to the instructions of the disc.  
This unit does not respond to any  
command when turned on for the first  
time.  
Turn on yourTV and follow the procedures on  
the screen to decide initial setup items.  
21  
 
Specifications  
PLAYBACK SYSTEM  
AUDIO PERFORMANCE  
DVDVideo  
DVD+RW  
DVD+R  
Video CD and SVCD  
CD (CD-R and CD-RW)  
MP3 CD  
DA Converter  
DVD  
DVD  
VCD/CD  
Signal-Noise (1kHz)  
Dynamic Range (1kHz)  
24 bits  
fs 96 kHz  
fs 48 kHz  
fs 44.1 kHz  
2 Hz - 44 kHz  
2 Hz - 22 kHz  
2 Hz - 20 kHz  
105 dB  
100 dB  
Distortion and Noise (1kHz)  
MPEG MP3  
0.0030%  
MPEG Audio L3  
TV STANDARD (PAL/50Hz) (NTSC/60Hz)  
Number of lines  
Playback  
625  
Multistandard  
525  
(PAL/NTSC)  
CONNECTIONS  
Y Output  
Cinch (green)  
Pb/Cb Output  
Pr/Cr Output  
S-Video Output  
Video Output  
Audio L+R output  
Audio Subwoofer  
Digital Output  
Cinch (blue)  
Cinch (red)  
Mini DIN, 4 pins  
Cinch (yellow)  
Cinch (white/red)  
Cinch (black)  
1 coaxial, 1 optical  
IEC958 for CDDA / LPCM  
IEC1937 for MPEG1/2, Dolby  
Digital, DTS  
VIDEO PERFORMANCE  
Video output  
1Vpp into 75 ohm  
Y: 1Vpp into 75 ohm  
C: 0.3Vpp into 75 ohm  
Component video output Y: 1Vpp into 75 ohm  
PB/CB PR/CR: 0.7Vpp into 75 ohm  
On/Off  
Left/Right  
S-Video output  
Black Level Shift  
Video Shift  
AUDIO FORMAT  
Digital  
MPEG  
DTS/Dolby Digital  
PCM  
Compressed Digital  
GENERAL  
Dimensions (w x h x d)  
Weight  
POWER SUPPLY  
U.S.A. and Canada models 120 V, 60 Hz  
Australia model  
435 x 75 x 302 mm  
Approximately 2.8 Kg  
16, 20, 24 bits  
fs, 44.1, 48, 96 kHz  
Analog Sound Stereo  
Dolby Pro Logic downmix from Dolby Digital multi-channel  
sound  
3D Sound (TruSurround) for virtual 5.1 channel sound on 2  
speakers  
240 V, 50 Hz  
17 W  
(3W in standby mode)  
POWER CONSUMPTION  
Specifications subject to change without prior notice.  
22  
 
YAMAHA ELECTRONICS CORPORATION, USA 6660 ORANGETHORPE AVE., BUENA PARK, CALIF. 90620, U.S.A.  
YAMAHA CANADA MUSIC LTD. 135 MILNER AVE., SCARBOROUGH, ONTARIO M1S 3R1, CANADA  
YAMAHA ELECTRONIK EUROPA G.m.b.H. SIEMENSSTR. 22-34, 25462 RELLINGEN BEI HAMBURG, F.R. OF GERMANY  
YAMAHA ELECTRONIQUE FRANCE S.A. RUE AMBROISE CROIZAT BP70 CROISSY-BEAUBOURG 77312 MARNE-LA-VALLEE CEDEX02, FRANCE  
YAMAHA ELECTRONICS (UK) LTD. YAMAHA HOUSE, 200 RICKMANSWORTH ROAD WATFORD, HERTS WD1 7JS, ENGLAND  
YAMAHA SCANDINAVIA A.B. J A WETTERGRENS GATA 1, BOX 30053, 400 43 VÄSTRA FRÖLUNDA, SWEDEN  
YAMAHA MUSIC AUSTRALIA PTY, LTD. 17-33 MARKET ST., SOUTH MELBOURNE, 3205 VIC., AUSTRALIA  
YAMAHA CORPORATION  
3139 246 12064 Printed in China  
 

Westinghouse Indoor Furnishings W 204 User Manual
Whirlpool Range FGP325A User Manual
Whirlpool Ventilation Hood RH2630XJB1 User Manual
Woodstock Vacuum Cleaner W1823 User Manual
Xerox All in One Printer Pro 555 User Manual
Yamaha Network Card DB SREV1 User Manual
Zanussi Cooktop ZVH 66 F User Manual
Zanussi Dishwasher 503020 User Manual
Zanussi Refrigerator 102029 User Manual
Zanussi Washer Dryer WDI 1215 B User Manual