F61 Series
Wall Plate Assembly
INSTALLATION INSTRUCTIONS
Operator: Save these instructions for future use!
FAILURE TO READ AND FOLLOW ALL INSTRUCTIONS CAREFULLY
BEFORE INSTALLING OR OPERATING THIS CONTROL COULD CAUSE
PERSONAL INJURY AND/OR PROPERTY DAMAGE.
DESCRIPTION
This wall plate assembly is designed for mounting a 70
Series vertical thermostat to the wall or to a junction box.
Thewallcoverplatecoversthejunctionbox,walldamage,
or old thermostat markings.
PRECAUTIONS
CAUTION
NOTE
!
To prevent electrical shock and/or equip-
ment damage, disconnect electrical power
at main fuse or circuit breaker until installa-
tion is complete.
This instruction sheet is not intended as a wiring guide.
Refer to the thermostat installation instructions to ensure
proper wiring.
INSTALLATION
NOTE
When installing wall cover plate and
thermostat directly to wall, use the
pointed screws supplied
3
6-32 X
/
” flat-head
4
with the thermostat.
machine screws
Junction Box
No. 6 X 1” pan-head screws
(supplied with thermostat)
F61-2593 Wall Plate
Wall
Subbase
F0004-1748
F61-2593 Wall Plate
1E7X
Thermostat
Subbase
F0004-1748
Figure 1. Mounting 1F7X vertical digital
thermostat to vertical junction box.
1E7X
Thermostat
Figure 2. Mounting 1E7X vertical
digital thermostat to wall.
White-Rodgers is a division
of Emerson Electric Co.
PARTNO.37-6598A
0523
|