Samsung Washer SW55APP2 User Guide

FEATURES  
Detergent box and fabric softener  
dispenser:  
The detergent box evenly dispenses the washing  
detergent during the wash cycle to improve  
detergent dilution and reduce residue build-up.  
This feature also prevents bleaching damage  
to clothes from undiluted detergent when using  
the delay start cycle.  
Reciprocating “mini agitator”  
imitates hand wash action:  
With strong power for heavy clothes  
and soft touch for delicate items, the  
mini agitator moves up and down to  
remove dirt just like hand washing.  
4
1
The convenient fabric softener dispenser adds  
the softener automatically.  
FABRIC  
SOFTENER  
Twin filter nets collect lint  
and residue:  
Two large, wide filter nets catch lint and  
other larger particles that can accumlate  
on certain fabrics.  
2
3
Water cascades pound the  
wash:  
Powerful waterfalls injected from two  
ports above the wash bowl pound and  
push down floating garments to  
produce a more effective overall wash  
action.  
1
 
SAFETY INSTRUCTIONS  
WARNING!  
To reduce the risk of fire, electric shock, or injury to persons when using your appliance,  
take care to adhere to the following precautions.  
Where an unearthed power cord is not fitted,  
be sure that the washer is grounded.  
To avoid electrical shock use metal piping for the ground  
connection.  
Place clothes evenly into the washer  
as unevenly distributed laundry may cause  
excessive out-of-balance noise and vibration.  
Take care not to ground the washer to gas pipes or  
telephone cables due to the danger of explosion from  
lightning strikes.  
Maximum hot water supply temperature  
60 degrees.  
During spinning, don't put your  
hand in the spin basket.  
Because the spin basket is rotating  
at the high speed, rotating parts  
may injure your hand.  
Before washing, check all pockets.  
If nails or pins remain in pockets, they may  
damage the washer or clothes.  
Don’t press the control panel with a  
sharp object.  
Panel damaged or malfunction may occur.  
Openings must not be obstructed  
by carpeting when the washing machine is  
installed on a carpeted floor.  
If the control panel for this  
washer is damaged, it must be  
replaced by a repair shop appointed  
by the manufacturer, as special  
purpose tools are required.  
Turn off water taps when the washer is not in  
use to avoid water pressure damage to the  
pump.  
Do not operate this appliance  
if it is damaged, malfunctioning,  
partially disassembled, or has  
missing or broken parts, including  
a damaged cord or plug.  
To minimize the possibility of electric shock,  
unplug this appliance from the power supply  
or disconnect the washer at the household  
distribution panel by removing the fuse or  
switching off the circuit breaker before  
attempting any maintenance or cleaning.  
Do not store or use gasoline  
or other flammable vapors  
and liquids in the vicinity of this  
or any other appliance.  
The appliance is not intended for use by young  
children or infirm persons without supervision.  
The instructions for use shall specity the  
maximum mass or dry cloth in kg, for which  
the appliance is designed.  
Young children should be supervised to ensure  
that they do not play with the appliance.  
If the appliance is supplied from a cord  
extension set or electrical portable outlet  
device the cord extension set or electrical  
portable outlet device should be positioned  
so it is not subject to splashing or ingress  
of moisture.  
If the power supply cord is damaged,  
it must be replaced by the manufacturer  
or its service agent or a similary qualified  
person in order to avoid a hazard.  
3
 
INSTALLATION & MAINTENANCE  
ENVIRONMENT  
In case of pump-drained washer  
Leave some space.  
Maintain at least 10cm between the washer  
and the wall.  
Take out the Be sure to join tightly Install the drain  
cap-hose and  
connect the  
outlet-hose.  
the drain hose into the  
drain-outlet on the left  
side of the machine.  
hose in the position  
of about 70~80cm  
above the ground.  
Place the washer on a sturdy flat surface.  
If the washer is placed on an uneven or weak  
surface, noise and vibration can occur (allowable slope is 1 degree)  
cap-hose  
Never install the washer in a very steamy  
environment or where it might be open to the rain.  
Excessive moisture may cause an electrical shock hazard.  
outlet-hose  
Avoid direct sunlight or heaters.  
As plastic and electrical components are affected  
by direct heat,never place the washer near furnaces,  
boilers,etc.Do not place under direct sunlight.  
HOW TO CONNECT WATER SUPPLY HOSE  
Check the type of tap fitting which is in your laundry and then see appropriate  
instruction below:  
A tap of ordinary type is desirable  
In case of square tap  
Take out the internal part of the connector  
and join it in the following way.  
Internal part  
ORDINARY TAP  
SQUARE TAP  
ROTATING TAP  
1.Remove the adaptor from the  
water supply hose.  
4.Connect the water supply hose to  
the adaptor. Pull down the part  
(c) of the water supply hose .  
When you release part (c) the  
hose is automatically connects to  
the adaptor making a 'click'  
sound.  
2.First,using a "+" type screw  
driver, loosen the four screws  
on the adaptor.  
Next,take the adaptor and  
turn part(b) following the  
arrow for gap about 5mm  
between them.  
5.Connect the other end of the  
water supply hose to the inlet  
water valve at the top of the  
washer.  
Screw the hose clockwise all  
the way in.  
6.If the water tap is a screw  
type,assemble a water  
supply hose that fits to  
the tap as shown.  
3. Connect adaptor to the water  
tap by tightening the screws  
firmly.  
Then,turn part (b) following  
the arrow and put (a) and  
(b)together.  
4
 
CLEANING THE FILTER NET  
CLEANING THE FILTER (pump drained washer)  
If the filter net is clogged after washing, lift up the net  
Remove the collected lint and rinse the filter net.  
1. Place a rag under washer filter not to wet the floor.  
2. Turn the filter-cap to the left.  
3. Take out the filter and remove any sludge.  
4. Reassemble in reverse order.  
HOW TO ADD THE DETERGENT  
1. Open the detergent box  
by pulling in the direction of the  
arrow as shown in the figure.  
2. Add the amount of detergent for one  
washing evenly in the box so that the  
detergent does not overflow the box.  
LEVELLING  
1. Pull down the adjusting handles of  
the adjusting feet which are located  
at the right and left of the front side.  
2. Adjust the height of the  
HOW TO ADD THE FABRIC SOFTENER  
machine upwards or downwards.  
3. When the adjustment is finished,  
push back the handles to fix the  
adjusting feet.  
When a proper amount of fabric softener is stored  
in the box, it is automatically added in at the  
final rinse cycle.  
In case the hot water only is connected,  
this function will not be operated.  
NOTE  
Do not kick or step on the adjusting  
handles.  
When too much softener is stored above the  
SEE IF THE MACHINE IS PLACED LEVEL BY CHECKING  
THE POSITION OF THE WASHING TUB.  
base line, it may not be operated properly.  
Open the lid of the machine, pour water into the tub up  
to the level just below the pulsator, and adjust the legs  
so that the pulsator is positioned at the center of the  
water as shown in the figure.  
Only For models with polypropylene(plastic) wash bowl  
When the manufacturer’s recommended amount per  
load of fabric softener is stored in the softener inlet,  
it will be automatically dispensed during the final rinse  
cycle.  
Before operating the washing machine, make  
sure that any water remaining in softener dispenser  
from a previous load is removed.  
Place the machine more than 10cm away from the wall.  
5
 
WARNING! NOTE THE FOLLOWING PRECAUTIONS TO PREVENT ELECTRICITY  
LEAKAGE AND THE POSSIBILITY OF ELECTRIC SHOCK.  
Earthing is necessary to prevent leakage or electric shocks caused by the electric currents leaked from the machine.  
How to earth an outlet with earthing terminals when  
an earthed power load is not fitted.  
Outlet with earthing terminals:  
Even when the internal wires of the earthing terminals are joined,  
connect the earthing conductor (green) of the machine to the tap.  
When using an extension cord and a boosting transformer:  
Make sure that the earthing conductor is connected.  
Never make an earthing to  
The telephone line, lightning rod, or gas pipe as it is  
extremely dangerous in case of lightning strikes.  
TO DO A CLEAN WASHING  
• Press the POWER botton.  
• Pour a little detergent into case-detergent.  
• Turn on water supply to the wshing machine.  
• Choose the SOAK in CYCLE button and the HIGH in WATER LEVEL button.  
• Press the START/PAUSE button.  
WASHING INSTRUCTION  
PROCEDURE  
1. Sort the laundry into separate wash loads.  
Each load of washing should contain clothing which needs the same washing conditions.  
For example, you should not wash delicate clothes with very dirty work clothes.  
2. Load the laundry into washing.  
Before load, check all pockets, and close zippers, hooks and eyes.  
3. Add the detergent. (see page 5)  
4. Add the fabric softener. (see page 5)  
5. Close the lid.  
6. Press power button.  
7. Choose the wash program & optional cycle. (see page 7~8)  
If you choose “SENSOR” program you don’t need to select water level.  
Water level is set automatically at “SENSOR” program.  
Press the START/PAUSE button.  
8. Select the water level.  
Before choosing the water level, remember following things.  
When you choose SENSOR, HEAVY-DUTY, ECONO-WASH, DELICATE program,  
water level is selected “AUTO” automatically, but if you want to choose water level manually  
you can select. HIGH, MEDIUM, LOW, EXTRA LOW  
6
 
9. Select the water temperature.  
Before choosing thr water temperature remember the following:  
1) You can choose HOT, WARM, COLD on all programs except for delicate program.  
HOT is hot wash and cold rinse.  
WARM is warm wash and cold rinse.  
COLD is cold wash and cold rinse.  
2) When you choose delicate program, water temperature is selected automatically  
for warm wash and warm rinse.  
10. Close the lid and press the START/PAUSE button.  
11. Do you want extra rinse?  
For extra rinses press the cycle key 1 to 5 times (depending on the number of extra rinses required).  
You can select up to 5 extra rinses or return to a single rinse by pressing the cycle key.  
The time left display will show the number of rinses selected.  
Note that the extra rinse program is not available when pause is selected or during the spin cycle.  
WASH PROGRAM  
WOOL  
HEAVY DUTY ECONO WASH  
DELICATE  
SENSOR  
6 min  
20 min  
Normal  
5 min  
6 min  
18 min  
Wash Time  
Wash Action  
Wash Temp.  
Gentle  
Normal  
Gentle  
Normal  
HOT  
WARM  
COLD  
HOT  
WARM  
COLD  
HOT  
WARM  
COLD  
WARM  
COLD  
WARM  
COLD  
WARM  
COLD  
WARM  
COLD  
Deep Rinse  
Spin Time  
COLD  
6 min  
COLD  
3 min  
COLD  
6 min  
1 min  
1 min  
Total Time  
(High Water level)  
59 min  
40 min  
56 min  
36 min  
37 min  
WASHING PROGRAM  
SENSOR Program  
The best washing program is chosen automatically  
HEAVY DUTY Program  
This program is suitable for heavily soiled laundry  
Load size and water level is determined automatically  
Unplug the power cord after washing.  
Load size and water level are determined automatically  
or you can choose the water level you want  
Unplug the power cord after washing.  
ECONO Wash Program  
Saving your time and energy  
WOOL Program  
This program is suitable for woollen clothes  
This program is suitable for lightly soiled laundry  
Only high and medium water levels are available  
Unplug the power cord after washing.  
Load size and water level are determined automatically  
or you can choose the water level you want  
Unplug the power cord after washing.  
DELICATE Program  
Washing action is very gentle, so this program is suitable for  
delicate clothes like lingerie.  
Load size and water level are determined automatically  
or you can choose the water level you want  
Unplug the power cord after washing.  
7
 
OPTIONAL CYCLE  
WASH ONLY  
RINSE ONLY  
When you choose this function, only rinse cycle is operated.  
When you choose this cycle, only wash cycle is operated.  
Pressing optional cycle key during washing changes the wash  
time in two minute intervals.  
Pressing function key during rinsing changes the number of  
rinses. Up to 5 rinses can be optionally selected.  
Unplug the power cord after washing.  
The wash time can be changed to between 3 and 25 minutes.  
Load size and water level is determined automatically.  
Unplug the power cord after washing.  
SOAK  
DRIP DRY  
The laundry is soaked in water so that heavy dirt can be  
This function allows you to take drip clothes out of the washing  
machine while they are still wet before the final spin.  
You can choose drip dry cycle after choosing main wash  
program.  
eliminated sufficiently.  
You can choose soak cycle after choosing wash program.  
When you select soak function, 5 minute cycle (1 min.  
washing then 4 min. pause) continue for 30 minutes before  
main wash program.  
When you select drip dry the cycle is finished before final spin.  
Unplug the power cord after washing.  
Load size and water level is determined automatically.  
Unplug the power cord after washing.  
SPIN ONLY  
When you choose this cycle, only spin cycle is operated.  
RINSE AND SPIN ONLY  
When you choose this cycle, only rinse & spin cycle are  
operated without wash cycle.  
Pressing cycle key during spinning only cycle changes the  
spin dry time.  
The spin dry time can be changed to between 1 and 7 minutes.  
Pressing cycle key during operation changes the number  
of rinse (see above).  
You cannot change the spin dry time using this function.  
Unplug the power cord after washing.  
Unplug the power cord after washing.  
DELAY START  
This function allows you to delay the start of your chosen wash program for 3, 4, ... 18 hours.  
By pressing the delay start key you can select delayed period for 3, 4, ... 17, 18 hours, and your washing machine will finish  
the selected wash program after the delayed period.  
TROUBLESHOOTING  
Spinning does not work  
Washing machine won’t work  
Is the laundry spread out evenly  
Is the water tap opened?  
Is the washer plugged in?  
Is the power cut off?  
Is the fuse all right?  
Is there enough water?  
in the washer?  
Is the washer set on a sturdy  
flat surface?  
Is the lid closed?  
Water does not drain  
Is the drain hose down? (No pump)  
Is the drain hose frozen?  
Water is not supplied  
Is the water tap opened?  
Is the water cut off?  
Is the water supply hose or hose  
connection clogged?  
Is the water tap frozen?  
If water is not supplied in 60 minutes,  
a buzzer will sound, and the remaining  
time indicator will shown “7E”.  
Is the drain hose clogged?  
If the water does not drain in 15  
minutes, a buzzer will sound,  
and the remaining time  
indicator will show “E”  
While lid is opening,  
Water supply does not stop  
the washing machine won’t work  
Make sure to close the lid while washing  
machine is operating.  
Close the water tap.  
Disconnect the power supply cord.  
Call Samsung or service centre.  
8
 
IF YOU NEED HELP WITH YOUR NEW  
SAMSUNG WASHING MACHINE  
Contact your nearest Samsung office or Samsung authorised  
service centre for technical assistance.  
SPECIFICATION  
SW65ASP2  
SW55APP2  
Stainless Steel  
PP  
Bowl  
450  
Power input(Watts)  
Load capacity(kg)  
6.5  
5.5  
Size (WxDxH)(mm)  
Net Weight (kg)  
600X660X1010  
48  
Water Consumption(liters)  
Water Pressure(min-max)  
150(high)  
50~780KPa  
CODE NO : DC68-00967A  
 
Owner’s Instructions  
SW65ASP2/SW55APP2  
CONTENTS  
Page  
FEATURES ................................................................................... 1  
DESCRIPTION OF PARTS .......................................................... 2  
SAFETY INSTRUCTIONS ............................................................ 3  
INSTALLATION & MAINTENANCE ............................................ 4  
Environment .......................................................................... 4  
Connecting the drain hose .................................................... 4  
In case of pump-drained washer ........................................... 4  
How to connect water supply hose ........................................ 4  
Cleaning the filter net ............................................................ 5  
How to add the detergent ...................................................... 5  
How to add the fabric softener .............................................. 5  
Cleaning the sump filter......................................................... 5  
Levelling ................................................................................ 5  
Precautions................................................................................6  
WASHING INSTRUCTIONS ......................................................... 6  
Procedure .............................................................................. 6  
Wash programs ..................................................................... 7  
WASHING PROGRAM DETAILS ................................................. 7  
OPTIONAL CYCLES......................................................................8  
TROUBLESHOOTING ................................................................. 8  
SPECIFICATIONS  
 

Radio Shack Caller ID Box 997 User Guide
Radio Shack Radio 120 0615 User Guide
RayTek Thermometer MX Series User Guide
Roberts Radio Radio CRD 39 User Guide
Samsung DVD Player DVD V9700 User Guide
Samsung Security Camera SNP 3300A User Guide
Samsung VCR SV 5000 User Guide
Sanyo MP3 Player Accessories VCA 35E User Guide
Schumacher Battery Charger SSF 1000A User Guide
Sears Oven 93331 User Guide