Samsung MP3 Player YP NDU64B User Guide

-
CD-quality sound.  
What is MP3?  
MP3 refers to MPEG1 LAYER3. MP3 is a music file made of  
audio data compression technology with no degradation of  
the original sound.  
What is yepp?  
yepp’ is an advanced digital audio player which doesn't need a  
cassette tape or CD. You can download MP3 files from the Internet  
or PC Communications and enjoy great sound any time, any place.  
2
 
Listening to music through yepp’  
Searching the MP3 files at a faster speed  
Insert batteries into the battery compartment, and then  
connect the remote controller (earphone) correctly.  
Press the  
and  
buttons too move to the next track.  
Turn on the Power  
To search within a song being played back  
Press the  
controller.  
button on the yepp player or remote  
Press and hold the FF button ( ) while a song is being  
played back to fast forward. Release the button to  
resume playback.  
Playback  
Note  
Press and hold the REW (  
) button while a song is  
being played back to move quickly backward.  
Press the  
button on the yepp player or the remote  
controller.  
Note  
To pause playback, press the  
button the  
mark  
To skip to the next song while another song is being  
played back  
blinks on the remote controller display panel. Press the  
button again to resume playback. Every buttons  
enable the lamp on the panel to blink for 3 seconds.  
Press the FF button to move one track forward.  
Control Volume  
To search a song in stop mode  
Control volume with the volume control button (-/+) on  
your yepp player or remote controller.  
1 Press the FF button to move one track forward. To  
play back the song that you chose, press the PLAY  
Note  
Volume can be controlled from 00 to 20. Press shortly to  
move up or down by 1 step. Press and hold to move  
continuously.  
button (  
).  
2 Press the REW button to move one track backward.  
Note  
If the REW button is pressed before the first 5 seconds of  
the track has played, the previous song will be repeated.  
If the REW button is pressed after 5 seconds has played,  
the current song will be repeated.  
Stop Music  
Press the STOP button ( ) of your yepp player or remote  
controller to stop playing back sound.  
Note  
If the unit is in the Stop mode for more than 3 minutes it  
will power off automatically.  
4
 
Hold Function  
Setting the Modes  
While the Hold switch on your yepp player is on  
Each time the EQ/REP button of your remote controller is  
pressed and held, the modes will change in the order of  
REP, ALL, SHU and INT.  
Buttons on the yepp won't work. Each time a button is  
pressed, “Hold” will appear for a short time on the display  
only the buttons on your remote controller will work.  
REP mode : Repeats current track.  
ALL mode : Repeats all the tracks.  
SHU mode : Enables random playback.  
INT mode : Enables you to repeat the first 10  
seconds of the tracks saved (for 10  
seconds each).  
While the Hold switch on your remote controller is on  
The  
mark will appear on the display panel. None of  
the buttons on your remote control will work. The buttons  
on your yepp will work.  
Repeating Tracks/Section  
Using the Equalizer  
Press the “A Bbutton of your remote controller to  
repeat the track or section that you selected. Setting 'Repeat  
Track' needs a minimum of two seconds of play time.  
Each time the EQ/REP button of your remote controller is  
pressed, the equalizer modes will be changed in the  
order of Classic, Jazz, Rock and Normal.  
Normal mode is not indicated on the panel.  
1 Press the A B button of your remote control at the  
start point of the track or section that you want to  
repeat. Then, 'B' blinks on the display panel.  
Using the 3D Sound  
2 Press this button again at the end point of the track or  
Press the 3D buttonto add Surround 3D sound effect to  
four different modes (Normal, Classic, Jazz, Rock).  
The surround 3D sound is available only in the MP3  
mode.  
section that you want to repeat.  
Note  
The section from point A to point B that you selected will  
automatically be repeated. To cancel this function, press  
the AB button again. While tracks/sections are  
repeated, only the Stop and AB buttons work.  
5
 
Playing the recorded voice messages  
Voice Recording  
1 Use the FF ( ) and REW ( ) buttons to select the  
track (V001, V002...) you prefer.  
Recording the voice messages  
2 Press the  
button to playback the selected track.  
1 Press the MODE button on the main unit to switch  
into the voice mode.  
You can pause the track by pressing the  
once again.  
button  
-
Voice mode can only be activated in the stop mode.  
-
Press the  
button again to resume playback.  
2 Press the REC button and the voice messages will be  
recorded through the microphone.  
Note  
-
When you press the  
V002... V00n, you can listen to the recorded track that applies  
to the number currently shown on the LCD panel.  
button without selecting V001,  
-
Press the Stop button ( ) to stop recording. If you  
repeat this operation over and over, the voice  
messages will be recorded in the sequence of  
V001, V002....V00N.  
-
Press the FF or REW button during playback to move forward  
or in reverse at a faster speed.  
Note  
-
This feature allows you to easily record lectures at school or  
institute, interview and conference messages, etc. It therefore  
enhances study effectiveness and lets you keep important  
things for a long time.  
Playing the recorded voice messages  
1 Use the FF and REW buttons to select the track (V001,  
V002...) you want to erase.  
-
-
The player will automatically stop recording when the memory  
becomes full.  
2 Press the ERASE button for at least 1 second and the  
message "Erase?" will appear on the LCD panel. Then  
The voice messages are recorded on the built-in memory. If the  
memory is short in capacity, however, they will be recorded on  
the smart media card (in the sequence of V001, V002... V00N).  
press the  
button to erase the selected track.  
-
-
Be careful not to press the Erase button long because the  
erasing function may run.  
Note  
-
-
To cancel the erasing function press the  
button.  
Voice recording is made only on the main system.  
After the selected track is erased, the player will show the next  
track number.  
6
 
Listening to FM Radio  
To Search the Frequency Band  
To Save Radio Station  
1 Press the MODE button to switch to FM mode.  
1 At the radio station frequency that you want to save,  
press the EQ/REP button.  
2 Press and hold either REW ( ) or FF ( ). Then, the  
unit will automatically search from station to station  
(Auto Search).  
2 A saving location letter (a, b, c, d, e) blinks in front of  
the radio station that the screen display shows, press  
the A B button to choose one saving location.  
Then, press the EQ/REP button once more to save.  
3 To search manully in one step increments, press and  
release either REW or FF.  
-
The saving location letters (a, b, c, d, e) blink each  
time the AB button is pressed.  
Note  
-
Once a radio station is saved, you can move  
directly to the saved location by clicking on the  
AB button.  
-
-
In the FM mode, the LCD panel backlight is not turned on.  
In the FM mode, the screen display does not appear in the  
main system.  
-
-
Once the power is turned off, initialization will be made at  
MP3 mode. To set to FM mode, press the MODE button again.  
Note  
When in the FM mode, do not attempt Format, Delete or  
Download.  
-
-
Max. five stations (a, b, c, d, e) can be saved.  
You can replace one station with another at each saving location.  
But it is not possible to delete a saved station.  
-
Press the Stop button for a moment to turn off the system.  
7
 
Connecting yeppto PC or MAC  
Minimum PC System Requirements  
- Pentium 133 MHz  
- Windows 98/2000  
- 20 MB Free Disk Space  
- CD-ROM Drive (Optimum:8 X and more)  
- Built-in USB Port  
1 Connect the USB cable to the USB port of the  
computer.  
2 Turn the player on and connect the other end of the  
cable to the download connector.  
Note  
-
-
Be sure to install the yeppExplorer before connecting your  
yeppto PC or MAC. When the message Add new hardware  
wizardappears on the screen, click [Cancel] and then install  
the yeppExplorer.  
If the USB driver is not installed automatically, refer to page  
10.  
8
 
Installing Software on PC  
RealJukebox  
This software lets you listen to MP3 music on your  
computer digitally and enables you to encode your  
CDs into MP3 Files.  
Insert the Installation CD into the CD-ROM drive.  
The picture below appears when inserting the CD.  
yeppExplorer  
1 Click  
Click  
1 Click  
Click  
2 Click the next button on each successive window.  
Note  
-
If the Real Network home page is not connected  
automatically when the Realjukebox program has been  
installed, try to access “http://www.real.com”.  
2 Click the next button on each successive window.  
-
Install the other program or download the files depending  
on your requirement.  
Note  
Install the other program or download the files  
depending on your requirement.  
9
 
Installing Software on PC (Windows 2000)  
Formatting flash memory (continued...)  
If USB port error occurs after installing the yeppexplorer  
in Windows 2000, do the following steps 1~3.  
yeppExplorer  
1 Execute the yeppExplorer.  
-
Double-click the icon of the yeppExplorer on the  
desktop.  
1 Copy the secypusb. sys file from the installation CD.  
2 Paste the secypusb. sys into 'Drivers' from the  
system32 folder in Windows 2000 (System Root  
Directory). (ex: / WinNT/ system/Drivers)  
2 Click [File], [Format] and select [Flash Memory].  
Note  
Note  
Even though the secypub. sys file is present in the  
existing folder, by sure to run Change File.  
-
-
-
-
Before formatting the flash memory or the SmartMedia Card,  
connect your yeppto PC and click Refresh icon on the yepp’  
Explorer.  
If the optional SmartMedia Card is installed in the yepp, file(s)  
can also be saved to the card by clicking Copy to and selecting  
Smart Media Card.  
You can also format the flash memory or the SmartMedia Card  
by pressing the right button on the mouse and selecting  
Format.  
Formatting Flash memory (or Smart Media Card) will delete all  
existing files.  
3 Re-boot the computer.  
Installing Software on MAC  
Insert the Installation CD into the CD-ROM drive.  
The picture below appears when inserting the CD.  
1 Execute the yeppExplorer.  
-
Double-click the yeppExplorer icon.  
RealJukebox  
Connect your yeppto PC and execute the RealJukebox.  
2 Click the button on each successive window.  
-
1
After all installations are complete, the yepp’  
Explorer folder is created.  
2 Click/Double-Click through the following items.  
Devices -->Samsung Ne....  
3 Click Configure icon and Select Format_Flash_  
Card/Format_Internal_Memory.  
10  
 
Formatting flash memory  
Options (continued...)  
Note  
yeppExplorer  
-
-
Before formatting the flash(SmartMedia) Card or the Internal  
(flash) memory, press F5 Key to refresh. (Or click  
ViewRefresh in the Main menu)  
Formatting Flash memory(or Smart Media Card) will delete all  
existing files.  
MAC  
Execute the yeppExplorer.  
Double-click the yepp´ Explorer icon in the HDD.  
1
-
-
Auto  
-
Select when uploading  
the SC4 file on the  
form of the WAV file.  
-
The device has been initially set  
"Auto".  
2 Click [File], [Format] and select [Flash Memory].  
USB  
When the communication is  
not smooth in Auto, select an  
USB cable.  
Note  
-
-
-
Before formatting the flash memory or the SmartMedia Card,  
connect your yepp´ to PC and click Refresh icon on the yepp´  
Explorer.  
Note  
If the optional SmartMedia Card is installed in the yepp´, file(s)  
can also be saved to the card by clicking [Copy to] and  
selecting SmartMedia Card.  
Install the USB driver in the following sequence:  
"Select USB (setting option)"-> "Turn on the yepp"-> "Connect a  
cable to the PC". Then, the message of 'looking for a new device'  
appears and simultaneously the USB driver is installed. If the  
USB driver is not installed, even though you follow the above  
instructions. (contact your PC vendor or service center.)  
Formatting Flash memory (or Smart Media Card) will delete all  
existing files.  
11  
 
Options  
Sending files to yepp(continued...)  
RealJukebox (Installation of the USB driver)  
Before sending files to your yepp, connect the yeppto  
PC and execute the RealJukebox.  
1 After installing RealJukebox, connect the yepp to the  
PC.  
2 Execute RealJukebox.  
3 Click on Devices icon on RealJukebox screen.  
4 Select Install Device.  
yeppExplorer  
1 Execute the yeppExplorer.  
-
Double-click the icon of the yeppExplorer on the  
desktop.  
5 Follow the on-screen instructions for RealJukebox.  
2 Turn on the yeppby pressing  
.
MAC  
3 Click the Refresh icon on the yeppExplorer.  
4 Click [Copy to] and [Flash Memory] or [SmartMedia  
Check the Explorer is accessed.  
Access is allowed only when Explorer  
is selected. If Explorer is not  
selected, select Explorer and click  
on the OK button.  
Card].  
5 Select the file you would like to send to your yepp.  
6 Click [Open].  
-
The selected file has been saved. Now you can  
listen to music with yeppafter removing the  
parallel cable.  
Uploading Voice  
Click [File], [Copy to] and select [PC].  
Note  
When a voice file is transmitted to another person by  
E-mail, receiver should install the mi-sc4.acm file  
atc://windows//system to execute the file.  
The mi-sc4.acm file can be downloaded from  
-
-
The yeppuses around 1MB of memory for each minute of  
music.  
Execute file transfer in the MP3 mode only. If it is executed in  
FM mode, errors may take place.  
Note  
If yepp Explorer is installed in your PC, mi-sc4.acm will  
automatically be installed in c://windows//system.  
12  
 
Sending files to yepp(continued...)  
Sending files to yepp(continued...)  
RealJukebox  
MAC  
1 Execute RealJukebox.  
1 Execute the yeppExplorer.  
-
Double-click the RealJukebox icon on the desktop.  
-
Double-click the yepp´ TM Explorer icon in the  
HDD.  
2 Turn on the yeppby pressing  
.
2 Turn on the yeppby pressing  
.
3 Click/Double-Click through the following items.  
Devices---> Samsung Ne....  
3 Click the [File] [Refresh] on the yeppExplorer.  
4 Press F5 Key to refresh.  
4 Click [Copy to] and [Flash Memory] or [SmartMedia  
Card].  
5 Click Internal Yepp.../Smart Media...  
5 Select the file you would like to send to your yepp.  
6 Drag your selected file from your folder and drop into  
Yepp.../Smart Media... window.  
6 Click [Open].  
-
The selected file has been saved. Now you can  
listen to music with yeppafter removing the USB  
cable.  
7 Click the Begin Transfer icon, at the left side of the  
RealJukebox window.  
Note  
Execute file transfer in the MP3 mode only. If it is  
executed in FM mode, errors may take place.  
Note  
-
-
Music Match Jukebox is used for the Mac.  
You can download this software (free version) from internet  
sites. (http://www.musicmatch.com)  
-
The yeppuses around 1MB of memory for each minute of  
music.  
13  
 
Making MP3 files from an audio CD  
You must install RealJukebox on your computer before  
making MP3 files.  
3 Insert an audio CD into the CD-ROM drive.  
1 Execute RealJukebox.  
-
The CD information and Auto-Record Message is  
displayed. (If the CD already recorded, Auto-  
Record Message is not displayed.)  
-
Double-click the icon of the RealJukebox on the  
desktop.  
Note  
RealJukebox is a music management system provided by  
RealNetwork.  
-
If you select "Yes....", the all tracks is recorded.  
(If you want to select the track you would like to  
convert into an MP3 file, Select "No.....", and  
follow next step.)  
2 Set up enviroment for making MP3 files from an audio  
CD.  
1) Click "Tools" and "Preferences" from the main  
menu.  
2) Click the tab "Audio Quality".  
4 Select the track you would like to convert into an  
MP3 file.  
5 Click [Controls] and [Record Ctrl+R].  
3) Select "MP3 Audio" and 'Quality level' you would  
like to.  
4) If the MPS files will be played on more than one  
computer, make sure "Secure my..." is not checked.  
6 Recording status is displayed.  
-
Now you can listen to music on your yeppafter  
sending files to it.  
5) Select I accept...in the POP-UP Window.  
6) Click "OK".  
14  
 
Deleting files  
File Replace (on PC)  
Connect your yeppto your PC and execute the yepp’  
Explorer before deleting.  
1 Click the file that you want to replace.  
2 Drag the file to destination.  
yeppExplorer  
Note  
-
File replacement can be made with the Smart Media card in  
the same manner.  
1 Click the file you would like to delete.  
2 Click [File] and select [Delete].  
-
File replacement is not made between flash memory(built-in  
memory) and the Smart Media card (armoured memory),  
because they are not compatible with SDMI (Secure Digital  
Music Initiative).  
-
You can also delete the file by pressing the right  
button on the mouse and selecting Delete.  
-
File Replacement is not possible on the MAC.  
RealJukebox  
1 Click/Double-Click through the following items.  
Devices Samsung Ne....-->Internal Yepp.../Smart  
Media...  
SmartMedia Card  
Your yepp' player allows you to save and enjoy many  
more MP3 files by adding a SmartMedia Card. 8MB,  
16MB, 32MB or 64MB SmartMedia Cards can be used.  
2 Click the file you would like to delete.  
3 Click [Edit] and select [Delete].  
-
You can also delete the file by pressing the right  
button on the mouse and selecting Delete.  
1 Press the PUSH OPEN button to open the SmartMedia  
Card Slot.  
2 Insert the SmartMedia Card into the card slot of your  
player. Verify that the SmartMedia Card mark is  
displayed on your panel.  
MAC  
1 Click the file you would like to delete.  
-
To send files to the SmartMedia Card, you must  
format the card before using it.  
2 Click [File] and select [Delete].  
3 Push down the EJECT button (  
) in the direction of  
the arrow to take out the SmartMedia Card from the  
slot.  
15  
 
Required check items using a SmartMedia Card  
Troubleshooting  
According to the prevention of an illegal  
copy and copyright protection only an ID  
indicated SmartMedia Card may be used.  
The SmartMedia Card that has no ID  
indication cannot be used.  
The player does not work or nothing is displayed on the  
Remote control LCD.  
-
Check the capacity of the batteries. Two 1.5V AAA size  
batteries are required.  
-
Check the polarity (+ and -) of the batteries.  
Available SMC  
The buttons are not working.  
-
Check if the Hold Switch is down. While the Hold Switch is  
down, the buttons do not work.  
Note  
Do not insert/eject the SmartMedia card during  
playback of MP3 files. The player may not recognize the  
card or work properly. Always turn the player off before  
inserting or ejecting the SmartMedia Card.  
There is no audio produced when the  
pressed in MP3 mode.  
button is  
-
Check that MP3 files are stored in the built-in memory or the  
SmartMedia Card.  
MP3 files cannot be downloaded.  
Safety Precautions  
-
-
Check and/or replace the batteries.  
Check the connection between the parallel port of your PC  
and the parallel cable.  
- Do not drop your player or leave it under heavy  
objects.  
SmartMedia Card cannot be inserted into the player.  
-
Make sure you are using the correct SmartMedia Card. Only  
3.3V version cards will work in your yepp. 5V version Cards  
will not function correctly.  
- Do not allow any liquids to contact the player.  
If this happens, wipe the player with a dry cloth and  
call a Samsung Electronics service center.  
The files on the SmartMediaCard cannot be recognized.  
- Avoid areas of high humidity, strong magnetic fields, or  
sources of heat when storing your player.  
-
MP3 files downloaded to another media card from a different  
MP3 manufacturer may not work in your yepp.  
Format the SmartMedia Card and copy files again with the  
yeppExplorer.  
-
- Do not use thinner, alcohol, or benzene when cleaning  
the player. It may damage the player.  
16  
 
Security  
Technical Specifications  
You can get legal MP3 files from a growing number of  
Internet sites. Here are some sites which provide MP3  
files.  
Processor...........................................12MHz, 16bit CISC  
Memory Capacity....................Built-in Memory 32/64MB  
Power ..........................................................................3V  
What is SecuMax?  
Battery........................................................Two AAA-size  
8-hr or longer playing time  
With the increasing amount of digital multimedia  
content, the content providers became concerned with  
the ease in which the content could be copied and  
distributed in violation of their copyrights. This matter  
required the a system called SecuMAX for protecting  
copyrighted music and for using legal content  
conveniently.  
(with alkaline batteries)  
Dimensions (WxHxD).................................70x88x21mm  
(2.75x3.46x0.83)  
76g (2.68 Oz; without batteries)  
Case......................................................Plastic/Aluminum  
File Transmission Speed.....................1.5Mbps, minimum  
Memory Slot...................................SmartMedia Card slot  
Noise Ratio ..............................................................85dB  
Signal to Noise Ratio ...............................................7mW  
Output Frequency Range.............................20Hz-20KHz  
FM frequency............................................87.5~108MHz  
-
-
-
SecuMAX protects the copyrighted music against  
infringement.  
SecuMAX can be adapted to various types of digital  
contents.  
For further details on SecuMAX, please visit  
Internet Site ---> www.cddb.com  
-
RealJukeboxTM is either a registered trademark or  
trademark of Real Networks Inc. in the United  
States and/or other countries.  
-
-
Music CD-related data is provided through the  
Internet from the CDDBTM Music CD Database.  
Copyright© 1998 CDDB Inc. All rights reserved.  
17  
 

Radio Shack Cordless Telephone RT 551 User Guide
Radio Shack Intercom System 43 484 User Guide
Radio Shack Universal Remote 15 2127 User Guide
Ricoh All in One Printer PRIPORT VT2130 User Guide
Rotel Stereo Receiver RX803 User Guide
Samsung Computer Accessories ES55 User Guide
Samsung Computer Drive BG68 01622A User Guide
Sansui DVD Player SLEDVD198 User Guide
Sanyo Projector PLC XE34 User Guide
Sceptre Technologies Flat Panel Television X32 User Guide