Samsung CRT Television CRT Rear Projection TV User Guide

Connecting to the RCA Input  
Connection Panel(depending on the model)  
COLOR TELEVISION  
The RCA¨ and RCAˆ connectors are used for equipment,  
such as a VCR, DVD, decoder, satellite receiver, video game  
device, or video disc player. (When using the mono  
equipment, connect to the AUDIO-L input connector.)  
The RCAconnectors are used for equipment such as a  
DVD with component output (480i only).  
The actual configuration of your TV may be different,  
depending on your model.  
Owner’s Instructions  
Before operating, please read this manual thoroughly,  
Rear Panel  
and retain it for future reference.  
Connecting to the RCA Output  
Register your product at  
RCA output is only available for AV&Cable output.  
Component cables are not available to use.  
or  
The RCAØ connectors are used for equipment, such as a  
recording VCR or audio system.  
cable television network  
Front (or Side) Panel  
Control Panel(depending on the model)  
Œ Audio input  
The actual configuration of your TV may be different,  
depending on your model.  
´ Video input  
Front (or Side) Panel  
ˇ S-Video input  
¨ Headphone jack  
Whenever you connect an audio or video system to your  
television, ensure that all elements are switched off.  
Please be sure to match the color coded input terminals  
and cable jacks.  
Please be sure to match the color coded input terminals  
and cable jacks.  
Connecting to the RCA Input  
Connecting to an Aerial or Cable Television Network  
The Œ (AUDIO-L/R) and ´ (VIDEO) connectors are used  
for equipment, such as a camcorder, video disc player, or  
video game device.  
Œ Power on/off  
Connect the aerial or network input cable to the Œ (75 Ω  
coaxial socket).  
´ Remote control sensor  
ˇ Standby indicator  
¨ On-screen menu display  
ˆ Volume adjustment  
Ø Channel selection  
To view television channels correctly, a signal must be  
received by the set from one of the sources: an outdoor  
aerial, cable television network, or satellite network.  
If you are using an indoor aerial, you may need to adjust it  
when tuning your television until you obtain a picture that is  
both sharp and clear.  
Connecting to the S-VIDEO Input  
The ˇ (S-VIDEO) and Œ (AUDIO-L/R) connectors are used  
for equipment with an S-Video output, such as a camcorder  
or VCR.  
You can use the Ø buttons to switch the TV on when it is  
in standby mode depending on the model.  
The ˆ and Ø buttons also have the same function as the  
œ///buttons on the remote control.  
If the remote control no longer works or you have  
misplaced it, you can use the controls on the panel of the  
television.  
Connecting Headphones  
Connecting to the SCART Input/Output  
The ¨ (headphone) jack is used for watching a television  
programme without disturbing the other people in the room.  
Prolonged use of headphones at a high volume may damage  
your hearing.  
The SCART´ and SCARTˇ connectors are used for  
equipment, such as a VCR, DVD, decoder, satellite receiver,  
video game device, or video disc player.  
The SCART´ is also used for equipment with an RGB  
output, such as a video game device or video disc player.  
When both the front (or side) AV and rear connectors  
are connected to external equipment, the front (or  
side) AV receives priority.  
continued...  
AA68-03582C-02  
English - 1  
 
Check antenna input.  
Enter Exit  
Enjoy your watching  
2
3
Select the appropriated  
language by pressing the  
or button. Press the  
ENTER button.  
9
When you have finished,  
press the MENU button.  
Viewing the Menus  
The Enjoy your watchingis displayed, and then the  
channel which has been stored will be activated.  
1
Press the MENU button.  
The main menu is displayed on the screen. Its left side  
has five icons: Input, Picture, Sound, Channel, and  
Setup.  
The Check antenna input.is displayed.  
Setup  
TV  
If any language is not selected, the language menu  
will disappear about 30 seconds later.  
Re-setting the Plug & Play  
Method: MENU /†  
(Setup) ENTER /†  
(Plug & Play) ENTER  
Plug & Play  
Language  
: English  
Time  
2
3
4
Press the or button to select one of the icons.  
Press the ENTER button to access the icon’s sub-menu.  
Make sure that the antenna  
is connected to the  
television (refer to page 1).  
Press the ENTER button.  
The Auto Storemenu is  
displayed with Area  
selected.  
Child Lock  
Blue Screen  
Melody  
Auto Store  
TV  
: Off  
: On  
ASIA W/EUROPE  
:
Area  
Search  
CIS E/EUROPE  
CHINA  
Demonstration  
HONGKONG/UK  
AUSTRALIA  
NZ/INDONESIA  
SOUTH AFRICA  
AMERICA  
Press the or button to move to items in the menu.  
Press the ENTER button to enter items in the menu.  
Move  
Enter  
Return  
Move  
Enter  
Return  
Press the //œ/button to change the selected  
items. Press the MENU button to return to the previous  
menu.  
4
5
Press the ENTER button again.  
Press the or button to select your area. Press the  
5
Press the EXIT button to exit from the menu.  
ENTER button.  
Search  
6
To search the channels,  
select Searchby pressing  
the or button. Press  
Start  
Input (depending on the model)  
-
Enter  
Return  
the ENTER button.  
Source List / Edit Name  
Search  
7
Press the ENTER button  
again to start search  
channels. To stop the  
search, press the ENTER  
button.  
P1  
102MHz  
Source List  
7
%
TV  
Source List  
Stop  
TV  
You can switch between  
viewing signal from  
AV1  
----  
Enter  
Return  
Time  
AV2  
S-Video  
Component  
----  
----  
----  
Setup - Plug & Play (depending on the model)  
connected equipment, such  
as a VCR, DVD, set-top box,  
and the TV source  
TV  
When the channel  
--:--  
Clock  
am  
When the television is initially powered on, several basic  
customer settings proceed automatically and subsequently.  
The following settings are available.  
Sleep Timer  
On Timer  
:
Off  
searching has finished, the  
Timemenu is displayed  
with Clockselected.  
--:--  
--:--  
On Timer Volume  
am Off  
am Off  
: 10  
Move  
Enter  
Return  
Off Timer  
(broadcast or cable).  
You can change the required external source simply  
by pressing the VIDEO button on the remote  
control. It might take a short period of time for  
pictures to be switched. To return to the TV mode,  
press the TV button on the remote control.  
8
Press the œ or button to  
move to the hour or minute.  
Plug & Play  
1
If the television is in standby  
mode, press the POWER  
button on the remote  
control.  
The Plug & Playis  
displayed. It flickers for a  
little while, and then  
Languagemenu is  
displayed.  
Move  
Enter  
Return  
Language  
English  
Melayu  
Indonesia  
Set the hour or minute by pressing the or button.  
Edit Name  
Edit Name  
TV  
continued...  
----  
You can give a name to the  
external source.  
AV1  
:
VCR  
AV2  
:
:
:
DVD  
Cable STB  
S-Video  
Component  
Move  
Enter  
Sat. STB  
AV Recv.  
DVD Recv.  
Game  
Camcorder  
DVD Combo  
continued...  
Move  
Enter  
Return  
English - 3  
 
Channel - Manual Store  
Channel - Add/Delete (depending on the model)  
Channel - Auto Store  
Manual Store  
: P 3  
Add/Delete  
TV  
TV  
You can store channels,  
You can exclude channels you  
have chosen from the channels  
you scanned. When you scan  
through the stored channels,  
those you have chosen to skip  
are not displayed. All of the  
channels that you did not  
You can scan for the frequency ranges available to you (and  
availability depends on your country). Automatically allocated  
programme numbers may not correspond to actual or  
desired programme numbers. However you can sort  
numbers manually and clear any channels you do not wish  
to watch.  
Programme  
P 1 : Added  
P 2 : Added  
P 3 : Added  
P 4 : Added  
P 5 : Added  
including those received via  
cable networks. When storing  
channels manually, you can  
choose:  
Color System : AUTO  
Sound System : BG  
Search  
Channel  
Store  
: 46MHz  
: C 1  
:
?
-
Whether or not to store each  
of the channels found  
Move  
Adjust  
Return  
Move  
Enter  
Return  
-
The programme number of each stored channel which  
you wish to identify  
specifically choose to skip are displayed during scanning.  
Auto Store  
TV  
Channels are sorted and stored  
in the order which reflects their  
position in the frequency range  
(with lowest first and highest  
last). The programme originally  
selected is then displayed.  
ASIA W/EUROPE  
:
Area  
CIS E/EUROPE  
CHINA  
Search  
Select Addedor Deletedby pressing the ENTER button  
repeatedly.  
HONGKONG/UK  
AUSTRALIA  
NZ/INDONESIA  
SOUTH AFRICA  
AMERICA  
Programme (Programme number to be assigned to a  
channel)  
Color System: AUTO/PAL/SECAM/NT4.43/NT3.58  
Sound System: BG/DK/I/M  
Search (When you do not know the channel numbers):  
The tuner scans the frequency range until the first  
channel or the channel that you selected is received on  
the screen.  
Move  
Enter  
Return  
To stop the search before it  
has finished, press the  
MENU button.  
Search  
P1  
102MHz  
7
%
When finished, the Sortmenu  
is displayed. To sort the stored  
channels into the desired  
Stop  
Enter  
Return  
Channel (When you know the number of the channel to  
be stored)  
numerical order, refer to “Channel - Sort”. To exit without  
You can also select the channel number directly by  
sorting, press the EXIT button.  
pressing the numeric buttons (0~9).  
Store (When you store the channel and associated  
programme number)  
Channel - LNA (depending on the model)  
If there is no sound or abnormal sound, re-select the  
sound standard required.  
Channel  
TV  
This function is very useful in the  
situation that the TV is used in  
weak signal. LNAamplifies the  
TV signal in the weak signal  
area, but not noise.  
Auto Store  
Manual Store  
Add/Delete  
Sort  
Channel mode  
Off  
On  
LNA  
:
P (Programme mode): When completing tuning, the  
broadcasting stations in your area have been  
assigned to position numbers from P00 to P99. You  
can select a channel by entering the position number  
in this mode.  
Channel - Sort (depending on the model)  
Move  
Enter  
Return  
Sort  
TV  
This operation allows you to  
change the programme numbers  
of stored channels. This  
operation may be necessary  
after using auto store.  
LNA(Low Noise Amplifier) setting is to be made for  
From  
To  
Store  
: P 1  
: P--  
each channel.  
:
?
C (Real channel mode): You can select a channel by  
entering the assigned number for each air  
broadcasting station in this mode.  
S (Cable channel mode): You can select a channel by  
entering the assigned number for each cable channel  
in this mode.  
If the picture is noisy with the LNAset to On, select Off.  
Depending on areas, factory mode of LNAwill be set up  
as Onor Off.  
Move  
Adjust  
Return  
From: Channel number to  
be changed.  
To: New channel number to be identified.  
Store: Confirmation the exchange of channel numbers.  
English - 4  
 
Setup -Time  
Setup - Child Lock  
Setup -  
Language / Blue Screen /  
Melody / Demonstration  
Time  
Child Lock  
TV  
TV  
Clock  
This feature allows you to  
prevent unauthorized users,  
such as children, from watching  
unsuitable programmes by  
muting out video and audio.  
Child Lock cannot be released  
using front (or side) panel  
--:--  
Clock  
am  
Child Lock  
Programme  
Lock  
: On  
You can set the television  
clock so that the current time  
is displayed when pressing  
the INFO button on the  
remote control. You must  
also set the time if you wish  
Sleep Timer  
On Timer  
Off Timer  
: Off  
: P 1  
--:--  
--:--  
On Timer Volume  
am Off  
am Off  
:
?
Setup  
TV  
Language  
:
10  
Plug & Play  
Language  
It is variable depending on  
the model. When you start  
using the television for the  
first time, you must select the  
language which will be used  
for displaying menus and  
indications.  
: English  
Time  
Move  
Enter  
Return  
Move  
Enter  
Return  
Child Lock  
Blue Screen  
Melody  
: Off  
: On  
to use the automatic on or off timers.  
When pressing the button (On/Off) on the front  
buttons. Only remote control can release the Child Lock  
setting, so keep the remote control away from children.  
Demonstration  
Move  
Enter  
Exit  
(or side) of the television, the clock setting will be  
reset.  
Child Lock: On/Off  
If you want to unlock a channel, set to Off.  
Programme: Channel number to be locked.  
Sleep Timer  
Blue Screen  
You can select a time period of between 30 and 180  
minutes after which the television automatically switches  
to standby mode.  
Lock: When press the ENTER button, the Lockedis  
If no signal is being received or the signal is very weak, a  
blue screen automatically replaces the noisy picture  
background. If you wish to continue viewing the poor  
picture, you must set the Blue Screento Off.  
displayed.  
You can select these options simply by pressing the  
If any channel is locked, you can not enter the  
SLEEP button on the remote control. If the sleep  
timer is not yet set, Offis displayed. If it is already  
set, the remaining time before which the television  
switches to standby mode is displayed.  
Channelmenu by using the control buttons on the  
television, and the Not availableis displayed. You  
can access by using the remote control only.  
Melody  
You can hear melody sound when the television is  
powered on or off.  
On Timer / Off Timer  
Demonstration  
You can set the On/Off timers so that the television will  
switch on or off automatically at the time you select.  
To become familiar with the various menus provided by  
the television, you can view the in built demonstration.  
Each of the menu options is displayed in turn. To exit  
from the demonstration, press the EXIT button.  
You must set the clock first.  
On Timer Volume  
The preferred volume can be set for when the timer  
automatically turns on the television.  
Auto Power Off  
When you set the timer “On”, the TV will eventually turn  
off, ifno controls are operated for 3 hours after the TV  
was turned on by timer. This function is only available  
in timer “On” mode and prevents overheating, which  
may occur if a TV is on for too long.  
English - 5  
 
Picture (depending on the model)  
Mode / Custom /  
ColorTone / Size /  
-
Sound (depending on the model)  
Mode / Equalizer /  
Auto Volume / Pseudo Stereo /  
Turbo Sound  
-
Digital NR / DNIe Jr /Tilt  
Picture  
: Dynamic  
Sound  
Pseudo Stereo  
TV  
TV  
Mode: Dynamic/  
Mode: Standard/Music  
Mode  
Mode  
: Custom  
This feature converts a monaural sound signal into two  
identical left and right channels. Once the Pseudo  
Stereois set to Onor Off, these settings apply to the  
sound effects such as Standard, Music, Movie, and  
Speech.  
Standard/Movie/Custom  
/Movie/Speech/Custom  
Custom  
Equalizer  
You can select the type of  
picture which best  
corresponds to your viewing  
requirements.  
You can select the type of  
Color Tone  
Size  
Digital NR  
DNIe Jr  
: Normal  
: Normal  
: Off  
Auto Volume  
: Off  
Pseudo Stereo : Off  
special sound effect to be  
used when watching a given  
broadcast.  
Turbo Sound  
: Off  
: On  
Move  
Enter  
Exit  
Move  
Enter  
Exit  
You can select these  
You can select these  
Turbo Sound : Off/Plus/Voice  
This feature suitably emphasizes both higher and  
lower bands of sound (and includes other effects).  
You can enjoy more magnificent and dynamic  
sound when watching music, movie or other  
channels.  
options simply by pressing the P.MODE button on  
options simply by pressing the S.MODE button on  
the remote control.  
the remote control.  
Custom: Contrast/Brightness/Sharpness/  
Color/Tint(NTSC only)  
Equalizer  
The television has several settings which allow you to  
control the sound quality.  
The television has several settings which allow you to  
control the picture quality.  
You can change the options simply by pressing the  
TURBO button on the remote control.  
If you make any changes to these settings, the  
sound mode is automatically switched to Custom.  
If you make any changes to these settings, the  
picture mode is automatically switched to Custom.  
Auto Volume  
Color Tone: Cool2/Cool1/Normal/Warm1/  
Each broadcasting station has its own signal conditions,  
and so it is not easy to adjust the volume every time the  
channel is changed. This feature lets you automatically  
adjust the volume of the desired channel by lowering the  
sound output when the modulation signal is high or by  
raising the sound output when the modulation signal is  
low.  
Warm2  
Size  
You can select the picture size which best corresponds to  
your viewing requirements. It is variable depending on  
the model.  
You can change the picture size simply by pressing  
the P.SIZE button on the remote control.  
continued...  
Digital NR  
If the signal received by the television is weak, you can  
activate this feature to reduce any static and ghosting  
that may appear on the screen.  
DNIe Jr (Digital Natural Image engine Junior)  
This feature bring you more detailed image with detail  
enhancement, contrast enhancement and white  
enhancement. New image compensation algorithm gives  
brighter, clearer, much detailed image to you. DNIe Jr  
technology will fit every signals into your eyes.  
English - 6  
 
Teletext Feature(depending on the model)  
Troubleshooting  
Most television stations provide written information services  
via teletext. The index page of the teletext service gives you  
information on how to use the service. In addition, you can  
select various options to suit your requirements by using the  
remote control buttons.  
3
4
Before contacting the Samsung after-sales service, perform  
the following simple checks. If you cannot solve the problem  
using the instructions below, note the model and serial  
number of the television and contact your local dealer.  
(sub-page)  
Used to display the available sub-page.  
(teletext on/mix)  
Press to activate teletext mode after selecting the  
channel providing the teletext service. Press it again to  
overlap the teletext with the current broadcasting screen.  
No sound or picture  
Check that the mains lead has been connected to a  
wall socket.  
For teletext information to be displayed correctly,  
channel reception must be stable. Otherwise,  
information may be missing or some pages may not be  
displayed.  
5 Coloured buttons (red/green/yellow/blue)  
If the FASTEXT system is used by a broadcasting  
company, the different topics covered on a teletext page  
are color-coded and can be selected by pressing the  
coloured buttons. Press one of them corresponding to the  
required. The page is displayed with other coloured  
information that can be selected in the same way. To  
display the previous or next page, press the  
Check that you have pressed the  
button (On/Off)  
and the POWER button.  
Check the picture contrast and brightness settings.  
Check the volume.  
Normal picture but no sound  
Check the volume.  
Check whether the volume MUTE button on the  
remote control has been pressed.  
corresponding coloured button.  
6
7
(page up)  
No picture or black and white picture  
Adjust the color settings.  
Check that the broadcast system selected is correct.  
Used to display the next teletext page.  
(mode)  
Press to select the teletext mode (LIST/FLOF). If you  
press it in the LIST mode, it switches into the List save  
mode. In the List save mode, you can save teletext page  
Sound and picture interference  
Try to identify the electrical appliance that is affecting  
the television, then move it further away.  
into list using the  
(store) button.  
Plug the television into a different mains socket.  
8
9
(page down)  
Used to display the previous teletext page.  
Blurred or snowy picture, distorted sound  
Check the direction, location and connections of your  
aerial.  
(reveal)  
Used to display the hidden text (answers to quiz games,  
for example). To display normal screen, press it again.  
This interference often occurs due to the use of an  
indoor aerial.  
0
!
(size)  
Remote control malfunctions  
Press to display the double-size letters in the upper half  
of the screen. For lower half of the screen, press it again.  
To display normal screen, press it once again.  
Replace the remote control batteries.  
Clean the upper edge of the remote control  
(transmission window).  
1
2
(hold)  
Used to hold the display on a given page if the selected  
page is linked with several secondary pages which follow  
on automatically. To resume, press it again.  
(store)  
Check that the “+” and “-” ends of the batteries are  
Used to store the teletext pages.  
inserted correctly.  
(index)  
Check that the batteries are drained.  
Used to display the index (contents) page at any time  
while you are viewing teletext.  
English - 7  
 
OSD Map  
Important Warranty Information  
RegardingTelevision Format Viewing  
: It is variable depending on the model.  
Input✽  
-
-
Source List  
Edit Name  
-
VCR / DVD / Cable STB / Sat. STB / AV Recv. / DVD Recv. / Game /  
Standard screen format televisions (4:3, the aspect ratio of  
the screen width to height) are primarily designed to view  
standard format full-motion video. The images displayed on  
them should primarily be in the standard 4:3 ratio format and  
constantly moving. Displaying stationary graphics and  
images on screen, such as the dark top and bottom letterbox  
bars (wide screen pictures), should be limited to no more  
than 15% of the total television viewing per week.  
Camcorder / DVD Combo  
Picture  
-
-
-
-
-
-
Mode  
-
-
-
Dynamic / Standard / Movie / Custom  
Custom  
Color Tone  
Size  
Contrast / Brightness / Sharpness / Colour / Tint (NTSC only)  
Cool2 / Cool1 / Normal / Warm1 / Warm2  
Digital NR  
DNIe Jr  
-
-
Off / On  
Off / On  
Wide screen format televisions (16:9, the aspect ratio of the  
screen width to height) are primarily designed to view wide  
screen format full-motion video. The images displayed on  
them should primarily be in the wide screen 16:9 ratio  
format, or expanded to fill the screen if your model offers this  
feature, and constantly moving. Displaying stationary  
graphics and images on screen, such as the dark side-bars  
on non-expanded standard format television video and  
programming, should be limited to no more than 15% of the  
total television viewing per week.  
Sound  
-
-
-
-
-
Mode  
-
Standard / Music / Movie / Speech / Custom  
Equalizer  
Auto Volume  
Pseudo Stereo  
Turbo Sound  
-
-
-
Off / On  
Off / On  
Off / Plus / Voice  
Channel  
-
Auto Store  
-
Area  
-
ASIA/W.EUROPE / CIS/E.EUROPE / CHINA /  
HONGKONG/UK /AUSTRALIA / NZ/INDONESIA /  
SOUTH AFRICA / AMERICA  
-
-
-
-
-
-
-
Search  
-
Manual Store  
Programme  
Color System  
Sound System  
Search  
Additionally, viewing other stationary images and text such  
as stock market reports, video game displays, station logos,  
web sites or computer graphics and patterns, should be  
limited as described above for all televisions. Displaying any  
stationary images that exceed the above guidelines can  
cause uneven aging of picture tubes (CRTs) that leave  
subtle, but permanent burned-in ghost images in the  
television picture. To avoid this, vary the programming and  
images, and primarily display full screen moving images, not  
stationary patterns or dark bars. On television models that  
offer picture sizing features, use these controls to view the  
different formats as a full screen picture.  
-
-
AUTO / PAL / SECAM / NT4.43 / NT3.58  
BG / DK / I / M  
Channel  
Store  
-
-
-
Add/Delete  
Sort  
LNA  
-
Off / On  
Setup  
-
-
-
Plug & Play  
Language  
Time  
-
-
-
-
-
-
-
-
Clock  
Be careful in the selection and duration of television formats  
used for viewing. Uneven CRT aging as a result of format  
selection and use, as well as other burned-in images, is not  
covered by your Samsung limited warranty.  
Sleep Timer  
On Timer  
Off Timer  
On Timer Volume  
Off / On  
Off / On  
Off / On  
-
-
-
-
Child Lock  
Blue Screen  
Melody  
Demonstration  
English - 8  
 

QSC Audio Car Amplifier ISA 450 User Guide
Radica Games Games 76120 User Guide
Radio Shack Answering Machine TAD 1003 User Guide
Radio Shack Cordless Telephone 43 3576 User Guide
Reebok Fitness Home Gym RBEL99063 User Guide
Rheem Water Heater HE45 160 User Guide
Samsung Camcorder DC171BI User Guide
SanDisk MP3 Player VIEW 7UM ENG User Guide
Sanyo Battery Charger UR 320 User Guide
Sears Battery Charger 20071991 User Guide