Samsung Blu ray Player BD F5700 User Guide

BD-F5700  
Blu-ray Disc Player  
user manual  
imagine the possibilities  
Thank you for purchasing this Samsung product.  
To receive more complete service,  
please register your product at  
ENGLISH  
 
12. Use only with the cart,  
stand, tripod, bracket,  
Disc Storage  
` Do not keep in direct sunlight.  
Contents  
or table specified by  
` Keep in a cool ventilated area.  
the manufacturer,  
` Keep in a clean protection jacket and  
SAFETy INFORmATION  
Language Settings.....................................14  
Security Settings........................................14  
General Settings........................................15  
Support Settings .......................................15  
or sold with the  
store vertically.  
Warning.......................................................2  
Precautions .................................................2  
Disc Storage & Management.......................3  
Handling Cautions .......................................3  
Copyright ....................................................3  
apparatus. When  
a cart is used, use  
Handling Cautions  
caution when moving the cart/apparatus  
combination to avoid injury from tip-over.  
Do not expose this apparatus to dripping  
or splashing. Do not put objects filled with  
liquids, such as vases on the apparatus.  
mEdIA pLAy  
13. Unplug this apparatus during lightning  
storms or when unused for long periods  
of time.  
Playing a Commercially Recorded Disc......16  
Playing Files on a USB Device ...................16  
Playing a Disc with User Recorded Content ..16  
Playing Content Located in Your PC..........17  
Controlling Video Playback ........................17  
Controlling Music Playback........................17  
Playing Photo Contents.............................18  
To turn this apparatus off completely, you  
must pull the power plug out of the wall  
socket. Consequently, the power plug must  
be easily and readily accessible at all times.  
GETTING STARTEd  
14. Refer all servicing to qualified service  
personnel. Servicing is required when  
the apparatus has been damaged in any  
way, such as when the power-supply  
cord or plug is damaged, liquid has  
been spilled or objects have fallen into  
the apparatus, the apparatus has been  
exposed to rain or moisture, does not  
operate normally, or has been dropped.  
Before using the User Manual......................4  
Logos of Discs the player can play ..............4  
Accessories.................................................6  
Front Panel..................................................6  
Rear Panel...................................................6  
Remote Control...........................................7  
Do not plug multiple electric devices into  
the same wall socket. Overloading a socket  
can cause it to overheat, resulting in a fire.  
Before connecting other components to  
this player, be sure to turn them off.  
AppENdIx  
If you move your player suddenly from a cold  
place to a warm place, condensation may  
occur on the operating parts and lens and  
cause abnormal disc playback. If this occurs,  
unplug the player, wait for two hours, and  
then connect the plug to the power outlet.  
Then, insert the disc, and try to play back  
again.  
CONNECTIONS  
Troubleshooting.........................................19  
Specifications............................................20  
Connecting to a TV......................................7  
Connecting to an Audio System ..................8  
Connecting to a Network Router .................8  
Disc Storage & Management  
Holding Discs  
-
Fingerprints or scratches  
on a disc may reduce  
sound and picture quality  
or cause skipping  
SETTINGS  
If the product makes an abnormal noise  
or produces a burning smell or smoke,  
turn off the power switch immediately and  
disconnect the power plug from the wall  
outlet. Then, contact the nearest customer  
service center for technical assistance. Do  
not use the product. Using the product as  
it is may cause a fire or an electric shock.  
The Initial Settings Procedure.......................9  
Menu Navigation..........................................9  
Accessing the Settings Menu ....................10  
Display Settings.........................................10  
Audio Settings...........................................11  
Network Settings.......................................12  
System Settings ........................................14  
-
-
-
Avoid touching the surface of a disc  
where data has been recorded.  
Hold the disc by the edges so that  
fingerprints will not get on the surface.  
Do not stick paper or tape on the disc.  
Cleaning Discs  
Copyright  
-
If you get fingerprints or dirt  
on a disc, clean it with a mild  
detergent diluted in water  
and wipe with a soft cloth.  
© 2013 Samsung Electronics Co.,Ltd.  
All rights reserved; No part or whole of this  
user's manual may be reproduced or copied  
without the prior written permission of  
Samsung Electronics Co.,Ltd.  
-
When cleaning, wipe gently  
from the inside to the outside of the disc.  
3
 
Region Code  
Supported File Formats  
Getting Started  
Both players and discs are coded by region.  
These regional codes must match for a disc  
to play. If the codes do not match, the disc  
will not play.  
Notes on the USB connection  
Before using the User Manual  
Your player supports USB storage media,  
MP3 players, digital cameras, and USB  
card readers.  
The Region Code for this player is displayed  
on the rear panel of the player.  
disc Types and Contents your player can play  
The player does not support folder or file  
names longer than 128 characters.  
Media  
Disc Type  
Details  
Region  
Disc Type  
Area  
Some USB/External HDD/digital camera  
Code  
Blu-ray Disc  
BD-ROM or BD-RE/-R recorded in the BD-RE format.  
devices may not be compatible with the player.  
North America, Central  
DVD-VIDEO  
DVD-RW  
DVD-R  
Your player supports the FAT16, FAT32,  
Blu-ray  
Disc  
America, South America,  
Korea, Japan, Taiwan, Hong  
Kong and South East Asia.  
DVD-VIDEO, recorded DVD+RW/DVD-RW(V)/DVD-R/+R that have  
been recorded and finalized, or a USB storage media containing MKV  
or MP4 contents.  
and NTFS file systems.  
VIDEO  
A
Connect USB devices directly to the players  
USB port. Connecting through a USB cable  
may cause compatibility problems.  
DVD+RW  
DVD+R  
DVD-  
The U.S., U.S. territories and  
Inserting more than one memory device  
into a multi-card reader may cause the  
reader to operate improperly.  
1
CD-RW/-R,  
DVD-RW/-R,  
BD-RE/-R  
VIDEO  
Canada  
Music recorded on CD-RW/-R, DVD-RW/-R, BD-RE/-R or a USB  
storage media containing MP3 or WMA contents.  
MUSIC  
The player does not support the PTP protocol.  
Logos of Discs the player can play  
CD-RW/-R,  
DVD-RW/-R,  
BD-RE/-R  
Photos recorded on CD-RW/-R, DVD-RW/-R, BD-RE/-R or a USB  
storage media containing JPEG contents.  
Do not disconnect a USB device during a  
PHOTO  
"loading" process.  
The bigger the image resolution, the longer  
the image takes to display.  
NOTES  
This player cannot play MP3 files with DRM  
(Digital Rights Management) downloaded  
from commercial sites.  
`
`
`
`
The player may not play certain CD-RW/-R and DVD-R because of the disc type or recording conditions.  
If a DVD-RW/-R has not been recorded properly in DVD video format, it will not be playable.  
Your player will not play content that has been recorded on a DVD-R at a bit-rate that exceeds 10 Mbps.  
Blu-ray Disc  
BD-LIVE  
Your player only supports video with a  
frame rate under 30fps (frames per second).  
Your player will not play content that has been recorded on a BD-R or USB device at a bitrate that exceeds  
Your player only supports USB Mass  
Storage Class (MSC) devices such as  
thumb drives and USB HDD. (HUB is not  
supported.)  
25 Mbps.  
NTSC broadcast system in U.S.A, Canada, Korea, Japan  
`
Playback may not work for some types of discs, or when you use specific functions, such as angle change  
and aspect ratio adjustment. Information about the discs is written in detail on the disc box. Please refer to  
this if necessary.  
Certain USB HDD Devices, multi-card  
readers and thumb drives may not be  
compatible with this player.  
`
When you play a BD-J title, loading may take longer than a normal title or some functions may perform slowly.  
disc types your player cannot play  
If some USB devices require excessive  
power, they may be limited by the circuit  
safety device.  
HD DVD  
DVD-RAM  
DVD-RW (VR mode) 3.9 GB DVD-R for  
Authoring.  
DVD-ROM/PD/  
Super Audio CD  
CVD/CD-ROM/  
CDV/CD-G/CD-I/LD  
(CD-Gs play audio  
only, not graphics.)  
MV, etc  
(except CD layer)  
4
 
If playback from a USB HDD is unstable, provide additional power by plugging the HDD into  
a wall socket.  
Video decoder  
- Supports up to H.264 Level 4.1 and AVCHD  
- Does not support H.264 FMO/ASO/RS and VC1 SP/MP/AP L4  
If the problem continues, contact the USB HDD manufacturer.  
You must remove the USB storage device safely by performing the "Safely Remove USB"  
function to prevent possible damage to the USB memory.  
- MPEG4 SP, ASP :  
Below 1280 x 720 : 60 frames max  
Above 1280 x 720 : 30 frames max  
Press the HOmE button to move to the home screen, press the yELLOW (C) button, and  
then press the v button.  
- Does not support GMC 2 or higher  
SAMSUNG is not responsible for any data file damage or data loss.  
Audio decoder  
Your player does not support NTFS compressed files, sparse files, or encrypted files.  
You can repair or format a USB device on your Desktop PC. (MS-Windows OS only)  
- Supports WMA 7, 8, 9 and STD  
- Does not support WMA sampling rate of 22050Hz mono.  
- AAC: Max sampling rate: 96Khz (8, 11, 12, 16, 22,24, 32,44.1, 48, 64, 88.2, 96)  
Video File Support  
Max bitrate: 320kbps  
File Extension  
Container  
Video Codec  
MP4v3  
Audio Codec  
Resolution  
1920x1080  
Music File Support  
MP3  
Dolby Digital  
DTS  
File Extension  
Container  
Audio Codec  
Support Range  
*.avi  
AVI  
*.mp3  
-
MP3  
MP3  
WMA  
1920x1080  
H.264 BP/MP/HP  
PCM  
* Sampling rates (in kHz) - 8, 11, 16, 22, 32, 44.1, 48  
*.wma  
WMA  
WMA  
* Bit rates - All bit-rates from 5kbps to 355kbps  
MP3  
Dolby Digital  
DTS  
WMA  
1920x1080  
1920x1080  
VC-1 AP  
*.mkv  
MKV  
H.264 BP/MP/HP  
Picture File Support  
1920x1080  
1920x1080  
1920x1080  
1920x1080  
1920x1080  
1920x1080  
1920x1080  
VC-1 AP  
*.wmv  
*.mp4  
WMV (wmv9)  
MP4  
File Extension  
Type  
Resolution  
15360x8640  
15360x8640  
VC-1 SM  
*.jpg  
*.jpeg  
*.jpe  
MP4 (mp4v)  
H.264 BP/MP/HP  
MPEG1  
AAC  
MP1, 2  
Dolby Digital  
DTS  
JPEG  
PNG  
*.mpg  
PS  
MPEG2  
*.png  
*.mpeg  
H.264 BP/MP/HP  
Limitations  
- Even when a file is encoded by a supported codec listed above, the file might not be  
played if its content has a problem.  
- Normal playback is not guaranteed if the files container information is wrong or the file  
itself is corrupted.  
- Files having a higher Bit rate/frame rate than standard may stutter during sound/video playback.  
- The Seek (skip) function is not available if the files index table is damaged.  
5
 
AVCHd (Advanced Video Codec High definition)  
Front Panel  
This player can play back AVCHD format discs. These discs are normally recorded and used  
PLAY/PAUSE BUTTON  
in camcorders.  
The AVCHD format is a high definition digital video camera format.  
STOP BUTTON  
The MPEG-4 AVC/H.264 format compresses images with greater efficiency than the  
conventional image compressing format.  
OPEN/CLOSE BUTTON  
POWER BUTTON  
Some AVCHD discs use the "x.v.Color" format. This player can play back AVCHD discs that  
use "x.v.Color" format.  
"x.v.Color" is a trademark of Sony Corporation.  
"AVCHD" and the AVCHD logo are trademarks of Matsushita Electronic Industrial Co., Ltd.  
and Sony Corporation.  
NOTES  
`
Some AVCHD format discs may not play, depending on the recording condition.  
AVCHD format discs need to be finalized.  
`
`
"x.v.Color" offers a wider color range than normal DVD camcorder discs.  
Some MKV and MP4 format discs may not play, depending on the video resolution and frame rate condition.  
USB HOST  
REMOTE CONTROL SENSOR  
Accessories  
Check for the supplied accessories shown below.  
DISC TRAY  
NOTES  
`
When the player displays the Blu-ray Disc menu, you cannot start the movie by pressing the Play button  
on the player or the remote. To play the movie, you must select Play Movie or Start in the disc menu, and  
then press the  
button.  
v
`
You can perform software upgrades using the USB Host jack with a USB flash memory stick only.  
B
O
N
U
S
R
E
P
E
A
T
REPEAT  
LIGHT  
VIEW  
A-B  
Rear Panel  
Batteries for Remote Control  
(AAA Size) (4301-000121)  
User Manual  
(AK68-02285U)  
Remote Control  
(AK59-00172A)  
HDMI OUT  
LAN  
DIGITAL AUDIO OUT  
6
 
Remote Control  
Connections  
Tour of the Remote Control  
Connecting to a TV  
Connect an HDMI cable (not supplied) from the HDMI OUT jack on the back of the product to  
the HDMI IN jack on your TV.  
Turn the player on and off.  
Turn the TV on and off.  
-
-
Do not connect the power cord to the wall outlet until you have made all the other  
connections.  
After setup, allows you to set the input  
source on your TV.  
TV volume adjustment.  
Press to open and close the disc tray.  
When you change the connections, turn off all devices before you start.  
Press the number buttons to operate options.  
Use to enter the disc menu.  
Use to enter the popup menu/title menu.  
Press to skip backwards or forwards.  
Press to search a disc backwards or  
forwards.  
Audio  
Video  
Press to stop a disc.  
Press to play a disc.  
Press to pause a disc.  
Press to move to the Home menu.  
Press to switch the Blu-ray Disc/DVDs  
Use to access various audio functions on a  
subtitle language.  
disc (Blu-ray Disc/DVD).  
Press to use the Tools menu.  
Use to display the playback information  
when playing a Blu-ray Disc/DVDs.  
Use to select menu items and change menu  
values.  
Press to exit the menu.  
Return to the previous menu.  
Press to backlight the buttons on the remote  
control. This function is convenient for using  
at night or when the room is dark.  
(If this button is set to On, battery usage  
time will be reduced.)  
NOTES  
These buttons are used both for menus on the  
player and also several Blu-ray Disc functions.  
`
If you use an HDMI-to-DVI cable to connect to your display device, you must also connect the Digital Audio  
Out on the player to an audio system to hear audio.  
BONUS REPEAT REPEAT LIGHT  
VIEW  
A-B  
Press to use bonusview function.  
Allows you to repeat A-B disc.  
Allows you to repeat a title, chapter, track or  
disc.  
`
`
An HDMI cable outputs digital video and audio, so you don't need to connect an audio cable.  
Depending on your TV, certain HDMI output resolutions may not work. Please refer to the user manual of  
your TV.  
`
When you connect the player to your TV using the HDMI cable or to a new TV, and then turn it on for the  
first time, the player automatically sets the HDMI output resolution to the highest supported by the TV.  
NOTES  
Installing batteries  
`
If the remote does not operate properly:  
`
`
A long HDMI cable may cause screen noise. If this occurs, set HDMI Deep Color to Off in the menu.  
Check the polarity (+/–) of the batteries.  
Check if the batteries are drained.  
Check if the remote sensor is blocked by  
obstacles.  
To view video in the HDMI 720p, 1080i, or 1080p output mode, you must use a High speed (category 2)  
HDMI cable.  
`
HDMI outputs only a pure digital signal to the TV.  
Check if there is any fluorescent lighting nearby.  
If your TV does not support HDCP (High-bandwidth Digital Content Protection), random noise appears on  
the screen.  
CAUTION  
!
`
Dispose of batteries according to local environmental  
7
regulations. Do not put them in the household trash.  
 
Connecting to an Audio System  
Connecting to a Network Router  
You can connect the Blu-ray player to an audio system using one of the methods illustrated  
You can connect your player to your network router using one of the methods illustrated below.  
below.  
To use the DLNA network functionality, you must connect your PC to your network as shown  
iWn tihreeidllusNtreattiownos.rk  
-
-
Do not connect the power cord to the wall outlet until you have made all the other  
connections.  
When you change the connections, turn off all devices before you start.  
method 1 Connecting to an HdmI supported AV receiver  
Connect an HDMI cable (not supplied) from the HDMI OUT jack on the back of the product  
to the HDMI IN jack on your receiver.  
Best quality (Recommended)  
Broadband modem  
(with integrated router)  
method 2 Connecting to an AV receiver with dolby digital or a dTS decoder  
Broadband  
service  
Or  
Using a digital Coaxial cable (not supplied), connect the Coaxial Digital Audio Out jack on the  
product to the Digital Coaxial In jack of the receiver.  
Good quality  
You will hear sound only through the front two speakers with Digital Output set to PCM.  
Router  
Broadband  
service  
Broadband  
modem  
Method 1  
Audio  
Method 2  
Audio  
NOTES  
`
`
Internet access to Samsung's software update server may not be allowed, depending on the router you use or your  
ISP's policy. For more information, contact your ISP (Internet Service Provider).  
DSL users, please use a router to make a network connection.  
8
 
Wireless Network  
Settings  
`
If you leave the player in the stop mode for  
more than 5 minutes without using it, a screen  
saver will appear on your TV. If the player is  
left in the screen saver mode for more than 25  
minutes, the power will automatically turn off.  
The Initial Settings Procedure  
The Home screen will not appear if you do not  
configure the initial settings.  
The OSD (On Screen Display) may change in this  
player after you upgrade the software version.  
Menu Navigation  
Wireless Router  
The access steps may differ depending on the  
menu you selected.  
1
2
After the initial settings process is complete, you can  
then operate the panel buttons and remote control.  
Broadband service  
The Initial Settings Procedure appears when  
you turn on player for the first time and lets you  
set the OSD and menu languages, configure  
the connection to your home network, and  
choose the aspect ratio output (screen size  
and format) that is correct for your TV. Follow  
the directions that appear on the screen.  
3
4
NOTES  
`
If your wireless router supports DHCP, this player can use a DHCP or static IP address to connect to the wireless  
network.  
`
`
Set your wireless router to Infrastructure mode. Adhoc mode is not supported.  
The player supports only the following wireless security key protocols:  
HOME Button : Press to move to the Home  
1
menu.  
NOTES  
-
WEP (OPEN/SHARED), WPA-PSK (TKIP/AES), WPA2-PSK (TKIP/AES)  
RETURN Button : Return to the previous menu.  
2
3
4
`
`
The Home menu will not appear if you do not  
`
`
`
Select a channel on the wireless router that is not currently being used. If the channel set for the wireless router is  
configure the initial settings except as noted below.  
currently being used by another device nearby, it will result in interference and communication failure.  
(Enter) / DIRECTION Button :  
v
If you press the BLUE (D) button during  
In compliance with the newest Wi-Fi certification specifications, Samsung Blu-ray players do not support WEP or  
TKIP security encryption in networks running in the 802.11n mode.  
Move the cursor or select an item.  
Activate the currently selected item.  
Confirm a setting.  
network setup, you can access the Home menu  
even if the network setup is not completed yet.  
Wireless LAN, by its nature, may cause interference, depending on the operating conditions (router performance,  
`
`
When you return to the Home menu, the full  
screen mode is cancelled automatically.  
distance, obstacles, interference by other radio devices, etc).  
EXIT Button : Press to exit the current menu.  
If you want to display the Initial Setting screen  
again to make changes, press the button on  
Home menu  
@
the front panel of the player for more than 5  
seconds with no disc inserted. This resets the  
player to its default settings.  
6
1
2
Videos  
Photos  
Music  
Settings  
`
`
After the initial settings process is complete, you  
can operate the HDMI-CEC function.  
5
If you want to use the Anynet+(HDMI-CEC)  
function to aid in the initial set up process,  
please follow the instructions below.  
4
HD Movies  
CinemaNow  
Netflix  
VUDU  
CinemaNow  
Pandora  
1) Connect the player to an Anynet+(HDMI-  
CEC) compliant Samsung TV using HDMI Cable.  
No Disc  
a
Change Device  
d
View Devices  
"
Enter  
3
2) Set the Anynet+(HDMI-CEC) feature to On in  
both the TV and the player.  
3) Set the TV to the Initial Settings Procedure.  
9
 
NOTES  
NOTES  
Resolution  
Selects Music.  
Selects Settings.  
1
2
`
The access steps may differ depending on  
`
If the TV you connected to the player does not  
Lets you set the output resolution of the HDMI  
video signal to Auto, 1080p, 1080i, 720p or  
480p. The number indicates the number of  
lines of video per frame. The i and p indicate  
interlaced and progressive scan, respectively.  
The more lines, the higher the quality.  
the menu you selected. The OSD (On Screen  
Display) may change in this player after you  
upgrade the software version.  
support Movie Frame or the resolution you  
selected, the message "If no pictures are shown  
after selecting ‘Yes’, please wait for 15 seconds  
to return to the previous resolution. Do you  
want to change the resolution?" appears. If you  
select Yes, the TV’s screen will go blank for 15  
seconds, and then the resolution will revert to  
the previous resolution automatically.  
Displays the buttons you can use on the  
3
remote to access functions.  
Display Settings  
Selects applications.  
Selects Videos.  
Selects Photos.  
4
5
6
Resolution according to the output  
You can configure various display options  
such as the TV Aspect Ratio, Resolution, etc. mode  
`
If the screen stays blank after you have  
changed the resolution, remove all discs,  
TV Aspect Ratio  
Blu-ray disc/E-contents/digital Contents  
and then press and hold the button on the  
@
playback  
NOTES  
front of the player for more than 5 seconds.  
All settings are restored to the factory default.  
Follow the steps on the previous page to  
access each mode and select the Display Setup  
that your TV will support.  
Depending on the type of television you have,  
you may want to adjust the screen size setting.  
`
The Videos, Photos, and Music options require  
that you have an appropriate disc inserted into  
the player or a USB flash device attached to  
the player.  
HDMI / connected  
HDMI Mode  
Output  
NOTES  
E-contents/  
Setup  
`
`
Depending on the disc type, some aspect  
ratios may not be available.  
Blu-ray Disc  
Digital  
`
`
When the factory default settings are restored,  
all stored user BD data is deleted.  
contents  
If you select an aspect ratio and option which is  
different than the aspect ratio of your TV screen,  
the picture might appear to be distorted.  
Accessing the Settings Menu  
The Blu-ray Disc must have the 24 frame feature  
for the player to use the Movie Frame (24Fs) mode.  
Resolution of  
BD Wise  
1080p  
Blu-ray Disc  
To access the Settings menu and sub-menus,  
Max. Resolution Max. Resolution  
follow these steps:  
Auto  
movie Frame (24Fs)  
Bd Wise (Samsung TVs only)  
of TV input  
1080@60F  
of TV input  
1080@60F  
1.  
2.  
3.  
Press the pOWER button.  
1080p@60F  
Setting the Movie Frame (24Fs) feature to  
Auto allows you to adjust the players HDMI  
output to 24 frames per second for improved  
picture quality.  
BD Wise is Samsungs latest inter-connectivity  
feature.  
The Home Menu appears.  
(Movie Frame : Off)  
Press the ◄► buttons to select Settings,  
Movie Frame :  
Auto (24Fs)  
When you connect a Samsung player and a  
Samsung TV with BD Wise to each other via  
HDMI, and BD Wise is on in both the player  
and TV, the player outputs video at the video  
resolution and frame rate of the Blu-ray Disc/  
DVDs.  
1080@24F  
1080p@24F  
and then press the  
button.  
v
You can enjoy the Movie Frame (24Fs) feature  
only on a TV supporting this frame rate.  
You can select Movie Frame only when the  
player is in the HDMI 1080i or 1080p output  
resolution modes.  
1080i  
720p  
480p  
1080i  
720p  
480p  
1080i  
720p  
480p  
Press the ▲▼ buttons to select the  
desired submenu, and then press the  
button.  
v
4.  
5.  
Press the ▲▼ buttons to select the desired  
dVd playback  
item, and then press the  
button.  
v
NOTES  
HdmI Color Format  
Output  
Setup  
HDMI / connected  
Press the ExIT button to exit the menu.  
`
When BD Wise is on, the Resolution setting  
automatically defaults to BD Wise and BD Wise  
appears in the Resolution menu.  
HDMI Mode  
Lets you set the color space format for  
BD Wise  
Auto  
480i  
HDMI output to match the capabilities of the  
`
`
If the player is connected to a device that does not  
support BD Wise, you cannot use the BD Wise function.  
cHodnnmecIteddedeevpiceC(oTVl,omronitor, etc).  
Max. Resolution of TV input  
1080p  
1080i  
1080p  
1080i  
720p  
480p  
For proper operation of BD Wise, set the BD  
Wise menu of both the player and the TV to On.  
720p  
Lets you output video from the HDMI OUT jack with  
Deep Color. Deep Color provides more accurate  
color reproduction with greater color depth.  
480p  
10  
 
* If Source Stream is 2ch, "Re-encoded  
Dolby D" Settings are not applied.  
progressive mode  
pCm downsampling  
Lets you improve picture quality when viewing DVDs.  
Lets you choose to have 96KHz PCM signals  
downsampled to 48KHz before they are  
outputted to an amplifier. Choose only if your  
amplifier or receiver is not compatible with a  
96KHz signal.  
Blu-ray Discs may include three audio streams :  
-
-
Main Feature Audio : The audio soundtrack  
of the main feature.  
Audio Settings  
BONUSVIEW audio : An additional  
soundtrack such as the director or actors  
commentary.  
digital Output  
dynamic Range Control  
Lets you select the digital audio output format that is suitable for your TV or AV Receiver. For  
more details, please refer to the Digital Output Selection table below.  
-
Navigation Sound Effects : When you  
choose a menu navigation selection, a  
Navigation Sound Effect may sound.  
Navigation Sound Effects are different on  
each Blu-ray Disc.  
Lets you apply dynamic range control to  
Dolby Digital, Dolby Digital Plus, and Dolby  
True HD audio.  
digital Output Selection  
Auto : Automatically controls the dynamic  
range of Dolby TrueHD audio, based  
on information in the Dolby TrueHD  
soundtrack.  
Bitstream  
(Re-encoded  
DTS)  
Bitstream  
(Re-encoded  
Dolby D)  
Bitstream  
NOTES  
Setup  
PCM  
(Unprocessed)  
`
`
Be sure to select the correct Digital Output or  
you will hear no sound or just loud noise.  
HDMI supported  
AV receiver or  
Coaxial  
Also turns dynamic range control on for  
Dolby Digital and Dolby Digital Plus.  
HDMI  
HDMI  
HDMI Receiver or  
Connection  
Coaxial  
Coaxial  
Receiver  
Receiver  
Coaxial  
Re-encoded DTS  
If the HDMI device (AV receiver, TV) is not  
compatible with compressed formats (Dolby  
Digital, DTS), the audio signal outputs as PCM.  
Off : Leaves the dynamic range uncompressed,  
Re-encoded  
Dolby Digital *  
Re-encoded  
Dolby Digital *  
Re-encoded  
Dolby Digital *  
Re-encoded  
Dolby Digital *  
Re-encoded  
Dolby Digital *  
PCM  
Dolby Digital  
Up to 7.1ch PCM 2ch  
PCM  
PCM 2ch  
letting you hear the original sound.  
On : Turns dynamic range control on for  
all three Dolby formats. Quieter sounds  
are made louder and the volume of loud  
sounds is reduced.  
PCM 2ch PCM 2ch Dolby Digital Dolby Digital Re-encoded DTS  
Dolby Digital  
`
`
`
Regular DVDs do not have BONUSVIEW audio  
and Navigation Sound Effects.  
Dolby Digital Plus PCM 2ch PCM 2ch  
Dolby Digital Re-encoded DTS  
Plus  
Some Blu-ray Discs do not have BONUSVIEW  
audio and Navigation Sound Effects.  
Audio Stream  
on Blu-ray  
Disc  
Dolby TrueHD  
DTS  
PCM 2ch PCM 2ch Dolby TrueHD Dolby Digital Re-encoded DTS  
If you play MPEG audio soundtracks, the audio  
signal outputs as PCM regardless of your  
Digital Output selections (PCM or Bitstream).  
downmixing mode  
PCM 2ch PCM 2ch  
DTS  
DTS  
Re-encoded DTS  
Re-encoded DTS  
Re-encoded DTS  
PCM 2ch  
Dolby Digital  
DTS  
DTS-HD High  
Resolution  
Audio  
Lets you select the multi-channel downmix  
method that is compatible with your stereo  
system. You can choose to have the player  
downmix to normal stereo or to surround  
compatible stereo.  
DTS-HD High  
Re-encoded  
PCM 2ch PCM 2ch  
DTS  
Resolution Audio  
Dolby Digital *  
`
`
If your TV is not compatible with compressed  
multi-channel formats (Dolby Digital, DTS), the  
player may output PCM 2ch downmixed audio  
even though you selected Bitstream (either Re-  
encoded or Unprocessed) in the setup menu.  
DTS-HD Master  
DTS-HD  
Re-encoded  
Dolby Digital *  
PCM 2ch  
PCM 2ch PCM 2ch  
PCM 2ch PCM 2ch  
DTS  
PCM 2ch  
Audio  
Master Audio  
PCM 2ch  
PCM  
Audio Stream  
on DVD  
Dolby Digital  
DTS  
PCM 2ch PCM 2ch Dolby Digital Dolby Digital  
Dolby Digital  
PCM 2ch PCM 2ch  
DTS  
DTS  
DTS  
If your TV is not compatible with PCM sampling  
rates over 48kHz, the player may output 48kHz  
downsampled PCM audio even though you set  
PCM Downsampling to Off.  
Decodes main  
feature audio and  
BONUSVIEW audio  
stream together into  
PCM audio and add  
Navigation Sound  
Effects, then re-  
encodes the PCM  
audio into Dolby  
Digital bitstream  
Decodes main feature  
Outputs only main feature audio and BONUSVIEW  
audio stream so that your audio stream together  
Decodes main feature  
audio and BONUSVIEW AV receiver can decode the  
into PCM audio  
Definition for  
Blu-ray Disc  
Any  
audio stream together  
audio bitstream.  
and add Navigation  
into PCM audio and add You will not hear BONUSVIEW Sound Effects, then  
Navigation Sound Effects. audio and Navigation Sound  
Effects.  
re-encodes the  
PCM audio into DTS  
bitstream  
11  
 
5.  
Select Connect button, and then press  
the v button. The product detects the  
wired connection, verifies the network  
connection and then connects to the  
network.  
NOTE  
Internet provider.  
When finished entering all the values,  
select OK, and then press the v  
button. The player verifies the network  
connection and then connects to the  
network.  
Network Settings  
Network Setting  
`
You can get the Network values from your  
Wireless network  
setup  
Please contact your ISP to find out if your IP  
address is static or dynamic. If it is dynamic  
- and most are - we recommend using the  
Auto procedure for network setup. This is  
easiest and will work in the majority of cases.  
If it is static, you must use the manual set up  
procedure.  
iptime23  
8.  
You can connect your Blu-ray  
player to the internet. Please  
select which wireless network  
to use.  
setup  
solugen_edu#1  
Ğ
Wired - manual  
WPS(PBC)  
Search  
If you have a static IP address or the Automatic  
procedure does not work, you'll need to set  
the Network Settings values manually.  
m
Move  
"
Select  
'
Return  
Network setup directions start below.  
Wireless Network  
5.  
6.  
Select the desired network, and then  
Follow Steps 1 and 2 in Wired Network, and  
press the v button.  
Configuring your Network  
You can setup a wireless network connection  
in four ways:  
then follow these steps:  
On the Security screen, enter your  
network's Security Code or Pass  
Phrase.  
Connection  
1.  
2.  
Select Network Status. The player  
searches for a network, and then  
displays the connection failed message.  
-
-
-
-
Wireless Automatic  
Wireless Manual  
WPS(PBC)  
Before you begin, contact your ISP to find out  
if your IP address is static or dynamic. If it is  
dynamic, and you have a wired or wireless  
network, we recommend using the Automatic  
configuration procedures described below.  
Enter numbers directly using the number  
buttons on your remote control. Enter  
letters by selecting a letter with an arrow  
button, and then pressing v button.  
On the bottom of the screen, select Ip  
Settings, and then press the v button.  
The IP Settings screen appears.  
WPS(PIN)  
When you configure the wireless network  
connection, any wireless network devices  
currently connected through the player  
or, if applicable, the player's current wired  
connection, will be disconnected.  
NOTE  
If you are connecting to a wired network,  
connect the player to your router using a  
LAN cable before you start the configuration  
procedure.  
3.  
4.  
5.  
Select the IP Setting field, and then  
`
To view the password as you enter it, use the  
arrow buttons to select Show Password on  
the right side, and then press v button.  
press the v button.  
Select Enter manually in the IP Setting  
field, and then press the v button.  
If you are connecting to a wireless network,  
disconnect any wired network connection  
before you begin.  
7.  
When done, select done and then press  
the v button. The player verifies the  
network connection and then connects  
to the network.  
Ğ
Wireless - Automatic  
Select a value to enter (Ip Address,  
for example), and then press the v  
button.  
1.  
2.  
3.  
4.  
In the Home screen, select Settings,  
To begin configuring your network connection,  
follow these steps:  
and then press the v button.  
Use the number keypad on your remote  
control to enter the numbers for the  
value. You can also enter numbers using  
the ▲▼ buttons. Use the ◄► buttons  
on the remote control to move from  
entry field to entry field within a value.  
When done with one value, press the  
v button.  
8.  
When verification is complete, select  
Select Network, and then press the v  
OK, and then press the v button.  
button.  
Wired Network  
NOTES  
Select Network Settings, and then  
press the v button.  
`
You should be able to find the Security Code or  
Pass Phrase on one of the set up screens you  
used to set up your router or modem.  
Ğ
Wired - Automatic  
Select Wireless in the Network Settings  
screen, and then press the v button.  
The player searches for and then  
1.  
2.  
3.  
4.  
In the Home screen, select Settings,  
and then press the v button.  
Ğ
Wireless - manual  
6.  
7.  
Press the ▲ or ▼ button to move  
to another value, and then enter the  
numbers for that value following the  
instructions in Step 5.  
displays a list of the available networks.  
Select Network, and then press the v  
If you have a static IP address or the  
Automatic procedure does not work, you'll  
need to set the Network Settings values  
manually.  
button.  
Select Network Settings, and then  
press the v button.  
Repeat Steps 5 and 6 until you have  
Select Wired in the Network Settings  
filled in all values.  
1.  
Follow the directions in Wireless -  
screen, and then press the v button.  
Automatic through Step 5.  
12  
 
2.  
3.  
The player searches for a network,  
and then displays the connection failed  
message.  
11. When finished, select done at the right  
of the screen, and then press the v  
button.  
2.  
3.  
4.  
Select Network, and then press the v Allow (All) : The Internet connection is  
button.  
allowed for all BD-LIVE contents.  
Allow (Valid Only) : The Internet  
connection is allowed only for BD-LIVE  
contents containing a valid certificate.  
Select Network Settings, and then  
The player verifies the network  
connection and then connects to the  
network.  
On the bottom of the screen, select  
Ip Settings, and then press the v  
button.  
press the v button.  
Select Wireless in the Network Settings  
screen, and then press the v button.  
The player searches for and then  
prohibit : No Internet connection is allowed  
The IP Settings screen appears.  
12. After the player verifies the network,  
select OK, and then press the v  
button.  
for any BD-LIVE content.  
4.  
5.  
6.  
Select the IP Setting field, and then  
displays a list of the available networks.  
NOTES  
press the v button.  
5.  
6.  
Select the desired network, and then  
`
What is a valid certificate?  
Select Enter manually in the IP Setting  
Ğ
WpS(pBC)  
press the ► button.  
When the player uses BD-LIVE to send the  
disc data and a request to the server to certify  
the disc, the server uses the transmitted data  
to check if the disc is valid and sends the  
certificate back to the player.  
field, and then press the v button.  
Select the WpS(pIN), and then press  
the v button. The PIN pop-up  
appears.  
1.  
In the Home screen, select Settings,  
Select a value to enter (Ip Address, for  
example), and then press v button.  
Use the number keypad on your remote  
control to enter the numbers for the  
value. You can also enter numbers using  
the ▲▼ buttons. Use the ◄► buttons  
on the remote control to move from  
entry field to entry field within a value.  
When done with one value, press the  
v button.  
and then press the v button.  
2.  
3.  
4.  
5.  
Select Network, and then press the v  
7.  
Enter the PIN into the WPS PIN entry  
field in the router's Set Up screen and  
then save the the screen.  
button.  
`
The Internet connection may be restricted  
Select Network Settings, and then  
while you are using BD-LIVE contents.  
press the v button.  
NOTES  
Using Bd-LIVE™  
Select Wireless in the Network Settings  
`
Contact the manufacturer of the router for  
instructions explaining how to access the  
route's Set Up screens or refer to the router's  
user's manual.  
screen, and then press the v button.  
Once the player is connected to the network,  
you can enjoy various movie-related service  
contents using a BD-LIVE compliant disc.  
Press the ▲ button on your remote, and  
then press the ► button to select the  
WpS(pBC).  
7.  
Press the ▲ or ▼ button to move  
to another value, and then enter the  
numbers for that value following the  
instructions in Step 6.  
`
For WPS connection, set your wireless router’s  
security encryption to AES. Setting to WEP  
security encryption does not support WPS  
1.  
Attach a USB memory stick to the  
USB jack on the front of the player, and  
then check its remaining memory. The  
memory device must have at least 1GB  
of free space to accommodate the BD-  
LIVE services.  
6.  
7.  
Press the v button on your remote.  
The "Press the PBC button" message  
appears.  
NetwcoornknecTtieons. t  
8.  
Repeat Steps 6 and 7 until you have  
Press the WPS(PBC) button on your  
router within two minutes. Your player  
automatically acquires all the network  
settings values it needs and connects to  
your network.  
filled in all values.  
NOTES  
Use this menu item to check whether your  
`
You can get the Network values from your  
Internet provider.  
2.  
3.  
Insert a Blu-ray Disc that supports BD-  
nNeetwtworkocroknSnetcatitounsis working or not.  
LIVE.  
The Network Status screen appears.  
The player connects to the network after  
the network connection is verified.  
9.  
When finished, select OK, and then  
press the v button. The Security  
Screen appears.  
Select an item from various BD-LIVE  
service contents provided by the disc  
manufacturer.  
Use to check whether a connection to a  
Ğ
10. On the Security screen, enter your  
network's Security Code or Pass  
Phrase. Enter numbers directly using the  
number buttons on your remote control.  
Enter letters by selecting a letter with the  
▲▼◄► buttons, and then pressing the  
v button.  
WpS(pIN)  
nBedtw-oLrkivaendItnheteInrtnerentetChaosnbneeencetsitoabnlished.  
NOTES  
Before you begin, open the router's setup  
menu on your PC and access the screen with  
the WPS PIN entry field.  
1.  
`
The way you use BD-LIVE and the provided  
contents may differ, depending on the disc  
manufacturer.  
Set to allow or prohibit an Internet connection  
when you use the BD-LIVE service.  
In the Home screen, select Settings,  
and then press the v button.  
13  
 
You can turn on the power quickly by  
decreasing the boot time.  
Enables you to manage the downloaded  
contents you accessed through a Blu-ray disc  
that supports the BD-LIVE service and stored  
on a flash drive.  
buttons. To change the PIN, use the Change  
PIN function (page 15). Each time you access  
the Security Settings hereafter, you must  
enter that four digit PIN. If you don’t change  
the PIN, continue using the default PIN.  
The dLNA Function  
DLNA lets you play music, video, and photo  
files located in your PC or NAS on the player.  
NOTES  
`
If this function is set to On, Standby power  
You can check the devices information  
including the storage size, delete the BD data,  
or change the Flash memory device.  
To use DLNA with your player, you must  
connect the player to your network.  
(See pages 12~13).  
consumption will be increased.  
Bd parental Rating  
Anynet+ (HdmI-CEC)  
To use DLNA with your PC, you must install  
DLNA software on your PC.  
NOTES  
Prevents playback of Blu-ray Discs with  
specific age ratings unless the 4 digit PIN is  
Anynet+ is a convenient function that offers  
linked operations with other Samsung players  
that have the Anynet+ feature.  
`
In the external memory mode, disc playback  
may be stopped if you disconnect the USB  
device in the middle of playback.  
If you have NAS, you can use DLNA without  
any additional software.  
ednVtedredp. arental Rating  
To operate this function, connect this player to  
an Anynet+ Samsung TV with an HDMI cable.  
With Anynet+ on, you can operate this player  
using a Samsung TV remote control and start  
disc playback simply by pressing the pLAy  
`
Your player supports the FAT16, FAT32, and  
NTFS file systems. We recommend you use  
USB devices that support USB 2.0 protocol  
with 4 MB/sec or faster read/write speed.  
To download dLNA software  
This function works in conjunction with DVDs  
that have been assigned an age rating or  
numeric rating that indicates the maturity level  
of the content. These numbers help you control  
the types of DVDs that your family can watch.  
1.  
Go to Samsung.com  
2.  
Click Support, enter your players  
product number in the field that  
appears, and then click Product.  
(
) button on the TVs remote control.  
`
`
The Resume Play function may not work after  
For more information, please see the TV user  
you format the storage device.  
manual.  
Select the rating level you want to set.  
For example, if you select Level 6, discs rated  
above 6 - Level 7 and 8 - will not play.  
The total memory available to BD Data  
Management may differ, depending on the  
conditions.  
NOTES  
3.  
On the next screen, click Get downloads  
under Downloads.  
`
`
`
This function is not available if the HDMI cable  
does not support CEC.  
4.  
5.  
Click Software on the next page.  
A larger number indicates more mature content.  
If your Samsung TV has an Anynet+ logo, then  
it supports the Anynet+ function.  
When the DVD Parental Rating function is on,  
you must enter the 4 digit PIN to play discs  
with restricted rating levels.  
Click the icon in the DLNA line under File  
Language Settings  
to start the download.  
Depending on your TV, certain HDMI output  
resolutions may not work.  
For instructions explaining how to play content  
located on your PC, see page 17.  
You can select the language you prefer for the  
Home menu, disc menu, audio, and subtitles.  
Change pIN  
Please refer to the user manual of your TV.  
`
If you have Anynet+ turned on, when you  
turn off the product, disconnect, and then  
reconnect the power cable, the product turns  
on automatically to re-establish the Anynet+  
connection. After about 15 seconds, it turns off  
again automatically.  
NOTES  
Change the 4-digit password used to access  
security functions.  
System Settings  
`
The selected language will only appear if it is  
supported on the disc.  
To change the PIN, follow these steps:  
Initial Settings  
1.  
Select Change PIN, and then press the  
Security Settings  
When you access this function for the first  
time, the PIN screen appears. Enter the  
default PIN - 0000 - using the number  
button. The Enter old PIN screen  
v
By using the Initial Settings function, you can  
set the language, Network Settings, etc.  
For more information about the Initial Settings  
function, refer to the Initial Settings section of  
`
Some Samsung TVs, when connected to this  
product using the Anynet+ function will, when  
you turn them on, display a warning popup  
message saying no connection has been  
found. Never-the-less, the Anynet+ connection  
appears.  
2.  
Enter the old PIN. If you never changed  
the PIN, enter the default PIN: 0000.  
The Enter new PIN screen appears.  
tQhius iucskerSmtaanrutal (page 9).  
3.  
4.  
Enter the new PIN in the Enter new PIN  
Bd dias tparopmerlyaenstaabglisehemd aennd tavailable to use.  
fields.  
Re-enter the new PIN in the Confirm  
new PIN fields. The "PIN is changed  
successfully." message appears.  
14  
 
5.  
Press the  
button.  
automatically before restarting.  
(Never turn the player on or off manually  
during an upgrade.)  
`
The update is complete when the player turns  
off after restarting. Press the POWER button to  
turn on the updated player for your use.  
v
NOTES  
`
`
`
`
No disc should be in the product when you  
If you forget your password  
upgrade the software using the USB Host jack.  
`
`
Never turn the player off or on manually during  
the update process.  
4.  
The update progress popup will appear.  
When the update is completed, the  
player will turn off automatically.  
When the software upgrade is done, check the  
1.  
Remove any discs.  
software details in the software Upgrade menu.  
Samsung Electronics takes no legal  
2.  
Press and hold the @ button on the  
front panel for 5 seconds or more.  
All settings will revert to the factory settings.  
Do not turn off the player during the software  
upgrade. It may cause the player to malfunction.  
responsibility for player malfunction caused by  
an unstable Internet connection or consumer  
negligence during software upgrade.  
5.  
Press the pOWER button to turn on the  
player.  
Software upgrades using the USB Host jack  
must be performed with a USB flash memory  
stick only.  
NOTES  
NOTES  
`
When the factory default settings are restored,  
all the user stored BD data will be deleted.  
Contact Samsung  
`
The Update is complete when the player turns  
off after restarting. Press the POWER button to  
turn on the updated player for your use.  
Provides contact information for assistance  
Auto Upgrade Notification  
wTeithrmyosuropflaSyeer.rvice Agreement  
General Settings  
`
`
Never turn the player off or back on manually  
If you have connected the player to your  
network, and then set Auto Upgrade  
Notification on, the player automatically  
notifies you when a new software version is  
available for the player.  
during the update process.  
Time Zone  
Samsung Electronics takes no legal  
Lets you view the general disclaimer regarding  
third party contents and services.  
responsibility for player malfunction caused by  
an unstable Internet connection or consumer  
negligence during a software upgrade.  
Lets you specify the time zone that is  
applicable to your area.  
To set Auto Upgrade Notification on, follow  
Reset  
these steps:  
Support Settings  
By USB  
Returns all settings to their factory defaults  
except for the network settings.  
1.  
2.  
Select Auto Upgrade Notification, and  
then press the  
button.  
v
To upgrade by USB, follow these steps:  
Software Upgrade  
Use the ▲▼ buttons to select On, and  
1.  
then press the  
button.  
v
The Software Upgrade menu allows you to  
upgrade the players software for performance  
improvements or additional services.  
2.  
Download the latest USB software  
If there is a new software version available,  
upgrade zip archive to your computer.  
the player notifies you with a popup message.  
3.  
Unzip the zip archive to your computer.  
You should have a single RUF file with  
the same name as the zip file.  
1.  
To upgrade the firmware, select yes  
in the Pop-up. The player turns off  
automatically, then restarts, and begins  
the download. (Never turn the player on  
or off manually during an upgrade.)  
By Online  
To upgrade By Online, follow these steps:  
4.  
5.  
Copy the RUF file to a USB flash drive.  
1.  
Select By Online, and then press the  
Make sure there is no disc in the player,  
and then insert the USB flash drive into  
the USB port of the player.  
button. The Connecting to Server  
v
2.  
3.  
4.  
The update progress popup appears.  
message appears.  
When the update is complete, the player  
turns off again automatically.  
2.  
3.  
A popup message will appear if an  
6.  
7.  
In the players menu, go to Settings >  
update is available.  
Press the pOWER button to turn on the  
Support > Software Upgrade.  
player.  
If you select yes, the player will turn off  
Select By USB.  
NOTES  
15  
 
9.  
Use the ◄►▲▼ buttons to select a file  
Playing a Disc with User Recorded  
Content  
to view or play, and then press the  
v
Media Play  
button.  
NOTES  
You can play multimedia files you have  
Playing a Commercially Recorded  
recorded on Blu-ray, DVD, or CD discs.  
Videos  
Photos  
Music  
Settings  
Disc  
`
Even though the player will display folders for  
all content types, it will only display files of the  
Content Type you selected in Step 6 or Step  
6-1.  
1.  
2.  
Place a user recorded disc into the  
disc tray with the discs label facing  
up, and then close the tray. The Device  
Connected pop-up appears.  
1.  
2.  
3.  
Press the  
tray.  
button to open the disc  
8
No Disc  
123  
For example, if you selected music, you will  
only be able to see music files. You can change  
this selection by returning to the Home screen  
and following the directions from Step 4.  
Place a disc gently into the disc tray  
HD Movies  
CinemaNow  
VUDU  
CinemaNow  
Pandora  
a
Use the ◄► buttons to select the type  
of content you want to view or play -  
Videos, Photos, or Music - and then  
with the disc's label facing up.  
123  
a
Change Device  
c
Safely Remove USB  
d
View Devices  
"
Enter  
Press the  
button to close the disc  
8
tray. Playback starts automatically.  
6.  
press the  
button.  
10. Press the RETURN button one or more  
times to exit a current screen, exit a  
folder, or to return to the Home screen.  
Press the ExIT button to return directly  
to the Home Screen.  
v
music, or photos, and then press the  
NOTES  
button. Go to Step 7.  
v
Playing Files on a USB Device  
`
Even though the player will display folders for  
all content types, it will only display files of  
the Content Type you selected in Step 2. For  
example, if you selected music, you will only  
be able to see music files. You can change this  
selection by returning to the Home screen and  
repeating Step 2.  
-1  
5 . Press the ◄► buttons to select USB,  
then press the  
button.  
v
You can play multimedia files located on a  
USB storage device.  
11. The controls and tools you use to  
control and play videos, music, and  
pictures located on a USB device are  
identical to those you use to play videos,  
music, and pictures on a disc.  
123  
a
Settings  
1.  
2.  
Move to the Home menu.  
In Stop mode, connect the USB storage  
device to the USB port on the front  
panel of the player.  
3.  
A screen appears listing the contents  
of the disc. Depending on how the  
contents are arranged, you will see  
either folders, individual files, or both.  
Go to pages 17~18 for instructions.  
The message "Do you want to access  
HD Movies  
CinemaNow  
NOTES  
the device?" is displayed.  
Netflix  
VUDU  
CinemaNow  
Pandora  
`
You must remove the USB storage device  
safely by performing the "Safely Remove USB"  
function in order to prevent possible damage  
to the USB memory. Press the MENU button to  
move to the Home menu, select the YELLOW  
123  
d
Home  
"
Enter  
3.  
4.  
Press the ◄► button to select yes, and  
4.  
5.  
6.  
If necessary, use the ▲▼◄►buttons to  
then press the  
button.  
v
-1  
6 . Videos
select a folder, and then press the  
v
If you have a disc in the Blu-ray player,  
press the REd (A) or BLUE (d) button.  
If you do not, go to Step 6.  
music or photos, and then press the  
button.  
button.  
v
Use the ◄►▲▼ buttons to select a file  
(C) button, and then press the  
button.  
v
7.  
8.  
A screen appears listing the contents  
of the device. Depending on how the  
contents are arranged, you will see  
either folders, individual files, or both.  
to view or play, and then press the  
If you pressed the REd (A) button, go to  
Step 5.  
v
`
If you insert a disc when playing a USB storage  
device, the device mode changes to Blu-ray,  
DVD or CD automatically.  
button.  
If you pressed the BLUE (d) button, go  
Press the RETURN button one or more  
times to exit a current screen, exit a  
folder, or to return to the Home screen.  
Press the ExIT button to return directly  
to the Home Screen.  
-1  
to Step 5 .  
If necessary, use the ▲▼◄►buttons to  
5.  
Press the ▲▼ buttons to select USB,  
select a folder, and then press the  
v
and then press the  
button.  
v
button.  
7.  
Go to pages 17~18 for instructions  
that explain how to control playback of  
videos, music, and pictures on a disc.  
16  
 
8.  
9.  
Press the RETURN button one or more  
times to exit a current screen, exit a  
folder, or to return to the Home screen.  
Press the ExIT button to return directly  
to the Home Screen.  
Playing Content Located in Your PC  
Controlling Music Playback  
button  
button  
button  
Starts playback.  
Stops playback.  
6
5
7
To play content located in your PC on your  
Blu-ray disc player, you must connect the  
Blu-ray player to you network. (See pages  
12~13.) and install DLNA Software on your  
You can control the playback of music located  
on a Blu-ray disc, DVD, CD, USB device, or  
Pauses playback.  
During playback, press the  
yBouurttcoomnspuotenr. the Remote Control  
Go to pages 17~18 for instructions  
that explain how to control playback of  
videos, music, and pictures on a PC.  
or  
3
PToC.play Content From your pC  
button.  
4
Fast Motion  
Play  
Each time you press the  
or  
used for music playback  
3
button, the playback speed  
4
will change.  
1.  
2.  
Go to the Home Menu.  
Controlling Video Playback  
In pause mode, press the  
4
Press the BLUE (d) button on your  
1
button.  
You can control the playback of video content  
located on a Blu-ray disc, DVD, CD, USB  
device, or you computer. Depending on the  
media, some of the functions described in this  
manual may not be available.  
remote (Device).  
Slow Motion  
Play  
Each time you press the  
4
3.  
4.  
In the Device screen that appears, select  
button, the playback speed will  
your PC, and then press the  
button.  
v
change.  
4
5
Use the ◄► buttons to select the type  
of content you want to view or play -  
Videos, Photos, or Music - and then  
In pause mode, press the  
7
2
Step Motion  
Play  
button.  
Buttons on the Remote Control  
Each time you press the  
7
press the  
button.  
3
v
6
used for Video playback  
button, a new frame appears.  
NOTES  
NUMBER buttons (Audio CD (CD-DA) only) :  
During Playlist playback, press the desired  
track number.  
During playback, press the  
or  
2
1
`
Even though the player will display folders for  
all content types, it will only display files of  
the Content Type you selected in Step 4. For  
example, if you selected music, you will only  
be able to see music files. You can change this  
selection by returning to the Home screen and  
repeating Step 4.  
button.  
2
Skip Motion  
Play  
1
Each time you press the  
or  
1
The selected track is played.  
button, the disc moves to the  
2
1
previous or next chapter or file.  
Skip : During playback, press the  
the playlist.  
or  
1
2
button to move to the previous or next file of  
2
3
Using the disc menu, title menu,  
wq  
popup menu, and title list  
5.  
A screen appears listing the contents  
on your PC. Depending on how the  
contents are arranged, you will see  
either folders, individual files, or both.  
button : Stops a track.  
5
playback related buttons  
qq  
DISC MENU  
During playback, press this button  
Fast Play (Audio CD (CD-DA) only)  
The player does not play sound in Search,  
Slow or Step mode.  
button  
to start the disc menu function.  
During playback, press the  
button.  
or  
3
4
6.  
7.  
If necessary, use the ▲▼◄►buttons to  
TITLE MENU  
During playback, press this button  
to start the title menu function.  
4
To return to normal speed playback, press  
select a folder, and then press the  
v
button  
Each time you press the  
or  
button,  
3
4
the  
button.  
6
button.  
the playback speed will change.  
POPUP MENU  
button  
During playback, press this button  
Use the ◄►▲▼ buttons to select a file  
to start the popup menu function.  
Pause : Pauses a track.  
5
6
to view or play, and then press the  
v
button.  
button : Plays the currently selected  
6
track.  
17  
 
NOTES  
Repeat an Audio Cd (Cd-dA)/  
playlist  
`
`
You can create a playlist with up to 99 tracks  
mp3  
on Audio CDs (CD-DA).  
1.  
To move to the Music List, press the  
5
or RETURN button.  
If you remove all the tracks from a play list and  
1.  
During Playlist playback, press the  
The Music List screen appears.  
then press the  
button, the player lists and  
v
TOOLS button.  
plays all the tracks on the disc.  
1/2 Page  
Music  
TRACK 001  
Tools  
TRACK 0
TRACK 001  
Repeat Mode  
?
Off  
\
TRACK 002  
02:38  
02:38  
Playing Photo Contents  
You can control the playback of photo content  
located on a Blu-ray disc, DVD, CD, USB  
device, or your computer.  
Inform
a
ti  
on  
TRACK 003  
TRACK 004  
02:38  
<
Adjust  
>
Move  
'
Return  
02:38  
TRACK 005  
TRACK 006  
03:17  
TRACK 005  
02:38  
TRACK 006  
02:38  
TRACK 007  
TRACK 008  
02:38  
+
00:08 / 05:57  
02:38  
TRACK 009  
02:38  
TRACK 010  
02:38  
03:35  
"
Pause  
Tools  
'
Return  
c
Select  
(
)
Jump Page  
'
Return  
CD  
CD  
Using the Tools menu  
During playback, press the TOOLS button.  
2.  
2.  
3.  
Press the ◄► buttons to select Track,  
to a desired track, and then press the  
yELLOW (C) button. A check appears  
on the track.  
All, Shuffle, or Off.  
Start Slide Show/ Select to start or stop the slide  
Stop Slide Show show.  
Press the  
button.  
v
Repeat this procedure to select  
additional tracks.  
Slide Show Speed Select to set a slide show's speed.  
Songs are played in the order  
Off  
in which they were recorded.  
Background  
Select to listen to music while  
3.  
4.  
To remove a track from the list, move to  
the track, and then press the yELLOW  
(C) button again.  
Music  
viewing a slide show.  
(
(
) Track  
The current song is repeated.  
All songs are repeated.  
Select to enlarge the current  
picture. (Enlarge up to 4 times)  
) All  
Zoom  
The check on the track is cancelled.  
Shuffle plays songs in random  
When done, press the  
button.  
v
Select to rotate the picture. (This  
(
) Shuffle  
order.  
The tracks you selected are displayed  
on the right side of the screen. The  
player plays the first track.  
Rotate  
will rotate the picture either  
clockwise or counter clockwise.)  
Information  
NOTES  
Shows the picture information.  
5.  
6.  
To change the play list, press the  
RETURN button to return to the Music  
List. Repeat Steps 2, 3, and 4.  
`
`
Depending on the disc or storage device, the  
Tools menu may differ.  
To cancel the play list and return to the  
Home screen, press the RETURN or  
ExIT button.  
To enable the background music function, the  
photo file must be in the same storage media  
as the music file.  
However, the sound quality can be affected  
by the bit rate of the MP3 file, the size of the  
photo, and the encoding method.  
`
You can't enlarge the subtitle and PG graphic  
in the full screen mode.  
18  
 
PROBLEM  
Forgot password  
SOLUTION  
Appendix  
Press the @ button (on front panel) for more than 5 seconds with no disc  
inside. All settings including the password will revert to the factory settings.  
Don’t use this unless absolutely necessary.  
Troubleshooting  
Before requesting service, please try the following solutions.  
When the factory default settings are restored, all stored user BD data is  
deleted.  
PROBLEM  
No operation can be  
performed with the remote  
control.  
SOLUTION  
The picture is noisy or  
distorted  
Make sure that the disc is not dirty or scratched.  
Clean the disc.  
Check the batteries in the remote control. They may need replacing.  
Operate the remote control at a distance of no more than 20 feet from the  
player.  
No HDMI output.  
Check the connection between the TV and the HDMI jack of the player.  
Remove batteries and hold down one or more buttons for several minutes  
to drain the microprocessor inside the remote control to reset it. Reinstall  
batteries and try to operate the remote control again.  
Check if your TV supports 480p, 720p, 1080i, or 1080p HDMI input  
resolutions.  
Abnormal HDMI output  
screen.  
If random noise appears on the screen, it means that TV does not support  
HDCP (High-bandwidth Digital Content Protection).  
Disc does not play.  
Ensure that the disc is installed with the label side facing up.  
Check the region number of the Blu-ray Disc/DVD.  
If you experience other  
problems.  
Go to the contents and find the section of the user manual that contains the  
explanations regarding the current problem, and follow the procedure once  
again.  
Disc Menu does not appear.  
Ensure that the disc has disc menus.  
The prohibition message  
appears on the screen.  
This message appears when an invalid button is pressed.  
If the problem still cannot be solved, please contact your nearest Samsung  
authorized service center.  
The Blu-ray Disc/DVD’s software doesn’t support the feature (e.g., angles).  
You’ve requested a title or chapter number or search time that is out of range.  
DLNA function  
I can see folders shared  
through DLNA, but I cannot  
see the files.  
Play mode differs from the  
Setup Menu selection.  
Some of the functions selected in the Setup Menu may not work properly if  
the disc is not encoded with the corresponding function.  
DLNAs shows only files corresponding to the Image, Music, and Movie  
categories. Files that do not correspond to these categories are not displayed.  
The screen ratio cannot be  
changed.  
The Screen Ratio is fixed on your Blu-ray Disc/DVD.  
This is not a problem with the player.  
Video is played intermittently.  
Check if the network is stable.  
Check if the network cable is properly connected and if the network is  
overloaded.  
No audio.  
Make sure you have selected the correct Digital Output in the Audio Options  
Menu.  
DLNA connection between  
Player and PC is unstable.  
The IP address under the same subnetwork should be unique. If they are not,  
IP interference can cause this phenomenon.  
The screen is blank.  
If the HDMI output is set to a resolution your TV cannot support (for example,  
1080p), you may not see a picture on your TV.  
Check if you have a firewall enabled.  
If so, disable the firewall function.  
Press the @ button (on front panel) for more than 5 seconds with no disc  
inside. All settings will revert to the factory settings.  
When the factory default settings are restored, all stored user BD data is  
deleted.  
19  
 
Specifications  
PROBLEM  
BD-LIVE  
SOLUTION  
Power Requirements  
Power Consumption  
Weight  
AC110-120V 50/60Hz  
12W  
2.2 Ibs  
I cannot connect to the BD-  
Check whether the network connection is working or not by using the  
Network Status menu.  
LIVE server.  
Check whether the USB memory device is connected to the player.  
General  
USB  
Dimensions  
10.6 (W) X 7.6 (D) X 1.6 (H) inches  
+41°F to +95°F  
10 % to 75 %  
USB 2.0  
The memory device must have at least 1GB of free space to accommodate  
the BD-LIVE service.  
Operating Temperature Range  
Operating Humidity Range  
Type A  
You can check the available size in BD Data Management.  
Check whether the BD-LIVE Internet Connection menu is set to Allow(All).  
If all above fails, contact the contents provider or update the player to the  
latest firmware.  
DC output  
Video  
Audio  
Digital Audio Output  
Ethernet  
5V 500mA Max.  
1080p, 1080i, 720p, 480p  
PCM, Bitstream  
Coaxial  
100BASE - TX Terminal  
Bulit-in  
When using the BD-LIVE  
service, an error occurs.  
The memory device must have at least 1GB of free space to accommodate  
the BD-LIVE service.  
HDMI  
You can check the available size in BD Data Management.  
Audio Output  
Network  
NOTES  
`
When the factory default settings are restored, all stored user BD data is deleted.  
Wireless LAN  
-
-
-
-
Network speeds equal to or below 10Mbps are not supported.  
Design and specifications are subject to change without prior notice.  
Weight and dimensions are approximate.  
Repairs  
If you contact us to repair your player, an administration fee may be charged if either:  
1.  
An engineer is called out to your home at your request and there is no defect in the  
Dispose unwanted electronics through an approved recycler.  
or call, (877) 278 - 0799  
product.  
2.  
You bring the unit to a repair center and there is no defect in the product.  
We will provide you with the amount of the administration fee before we make a home visit or  
begin any work on your player.  
We recommend you read this manually thoroughly, search for a solution on line at www.  
samsung.com, or contact Samsung Customer Care at 1-800-SAMSUNG (726-7864) before  
seeking to repair your player.  
20  
 
For Blu-ray disc player progressive scan output : CONSUMERS SHOULD NOTE THAT  
NOT ALL HIGH DEFINITION TELEVISION SETS ARE FULLY COMPATIBLE WITH THIS  
product AND MAY CAUSE ARTIFACTS TO BE DISPLAYED IN THE PICTURE. IN CASE OF  
PROGRESSIVE SCAN PICTURE PROBLEMS, IT IS RECOMMENDED THAT THE USER  
SWITCH THE CONNECTION TO THE ‘STANDARD DEFINITION’ OUTPUT. IF THERE ARE  
QUESTIONS REGARDING OUR TV SET COMPATIBILITY WITH THIS product, PLEASE  
CONTACT OUR CUSTOMER SERVICE CENTER.  
Compliance and Compatibility Notice  
NOT ALL discs are compatible  
Subject to the restrictions described below and those noted throughout this Manual,  
including the Disc Type and Characteristics section of this user manual, disc types that can  
be played are: pre-recorded commercial BD-ROM, DVD-VIDEO, and Audio CD (CD-DA)  
discs; BD-RE/-R, DVD-RW/-R discs; and CD-RW/-R discs.  
Discs other than those listed above cannot be and are not intended to be played by this  
player. Some of the discs listed above may not play due to one or more reasons provided  
below.  
Copy protection  
Because AACS (Advanced Access Content System) is approved as the content protection  
system for the Blu-ray Disc format, similar to use of CSS (Content Scramble System) for  
the DVD format, certain restrictions are imposed on playback, analog signal output, etc., of  
AACS protected contents.  
Samsung cannot assure that this player will play every disc bearing the BD-ROM, BD-RE/-R,  
DVD-VIDEO, DVD-RW/-R, DVD+RW/+R and CD-RW/-R logos, and this player may not  
respond to all operating commands or operate all features of every disc. These and other  
disc compatibility and player operation issues with new and existing format discs are  
possible because:  
The operation of this product and restrictions on this product may vary depending on your  
time of purchase as those restrictions may be adopted and/or changed by AACS after the  
production of this product. Furthermore, BD-ROM Mark and BD+ are additionally used as  
content protection systems for the Blu-ray Disc format, which imposes certain restrictions  
including playback restrictions for BD-ROM Mark and/or BD+ protected contents. To obtain  
additional information on AACS, BD-ROM Mark, BD+, or this product, please contact  
SAMSUNG customer care center.  
-
Blu-ray is a new and evolving format and this player may not operate all features of Blu-  
ray Discs because some features may be optional, additional features may have been  
added to the Blu-ray Disc format after the production of this player, and certain available  
features may be subject to delayed availability;  
-
-
not all new and existing disc format versions are supported by this player;  
new and existing disc formats may be revised, changed, updated, improved and/or  
supplemented;  
Many Blu-ray Disc/DVDs are encoded with copy protection. Because of this, you should  
only connect your Player directly to your TV, not to a VCR. Connecting to a VCR results in a  
distorted picture from copy-protected Blu-ray Disc/DVDs.  
-
-
some discs are produced in a manner that allows specific or limited operation or restricts  
features during playback;  
Under the U.S. Copyright laws and Copyright laws of other countries, unauthorized  
recording, use, display, distribution, or revision of television programs, videotapes, Blu-ray  
Discs, DVDs, and other materials may subject you to civil and/or criminal liability.  
some discs bearing the BD-ROM, BD-RE/-R, DVD-VIDEO, DVD-RW/-R, DVD+RW/+R  
and CD-RW/-R logos may still be non-standardized discs;  
Cinavia Notice : This product uses Cinavia technology to limit the use of unauthorized  
copies of some commercially-produced film and videos and their soundtracks. When  
a prohibitet use of an unauthorized copy is detected, a message will be displayed and  
playback or copying will be interrupted. More information about Cinavia technology is  
To request additional information about Cinavia by email, send a postcard with your mailing  
address to: Cinavia Consumer Information Center, P.O. Box 86851, San Diego CA, 92138,  
USA.  
-
-
some discs may not be played depending on their physical state or recording conditions;  
problems and errors can occur during the creation of Blu-ray Disc or DVD software and/or  
the manufacture of discs;  
-
-
this player operates differently than a standard DVD player or other AV equipment; and/or  
for reasons noted throughout this user manual and for other reason(s) discovered and  
posted by SAMSUNG customer care center.  
If you encounter disc compatibility or player operation problems, please contact SAMSUNG  
customer care center.  
This product incorporates proprietary technology under licence from Verance Corporation  
and is protected by U.S. Patent 7,369,677 and other U.S. and worldwide patens issued  
and pending as well as copyright and trade secret protection for certain aspects of such  
technology. Cinavia is a trademark of Verance Corporation. Copyright 2004-2010 Verance  
Corporation. All right reserved by Verance. Reverse engineering or disassembly is prohibited.  
You may also contact SAMSUNG customer care center for possible updates on this player.  
For additional information on playback restrictions and disc compatibility, refer to the  
Precautions, Before Reading the user manual, Disc Types and Characteristics, and Before  
Playing sections of this user manual.  
21  
 
Network Service disclaimer  
License  
All content and services accessible through this device belong to third parties and are  
protected by copyright, patent, trademark and/or other intellectual property laws. Such  
content and services are provided solely for your personal noncommercial use. You may not  
use any content or services in a manner that has not been authorized by the content owner or  
service provider. Without limiting the foregoing, unless expressly authorized by the applicable  
content owner or service provider, you may not modify, copy, republish, upload, post, transmit,  
translate, sell, create derivative works, exploit, or distribute in any manner or medium any  
content or services displayed through this device.  
Manufactured under license from Dolby Laboratories. Dolby and the  
double-D symbol are trademarks of Dolby Laboratories.  
Manufactured under license under U.S. Patent Nos: 5,956,674; 5,974,380;  
6,487,535 & other U.S. and worldwide patents issued & pending. DTS, the  
Symbol & DTS and the Symbol together are registered trademarks & DTS  
2.0+Digital Out is a trademark of DTS, Inc. Product includes software. © DTS, Inc. All Rights  
Reserved.  
THIRD PARTY CONTENT AND SERVICES ARE PROVIDED "AS IS." SAMSUNG DOES NOT  
WARRANT CONTENT OR SERVICES SO PROVIDED, EITHER EXPRESSLY OR IMPLIEDLY,  
FOR ANY PURPOSE. SAMSUNG EXPRESSLY DISCLAIMS ANY IMPLIED WARRANTIES,  
INCLUDING BUT NOT LIMITED TO, WARRANTIES OF MERCHANTABILITY OR FITNESS FOR  
A PARTICULAR PURPOSE. SAMSUNG DOES NOT GUARANTEE THE ACCURACY, VALIDITY,  
TIMELINESS, LEGALITY, OR COMPLETENESS OF ANY CONTENT OR SERVICE MADE  
AVAILABLE THROUGH THIS DEVICE AND UNDER NO CIRCUMSTANCES, INCLUDING  
NEGLIGENCE, SHALL SAMSUNG BE LIABLE, WHETHER IN CONTRACT OR TORT,  
FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL OR CONSEQUENTIAL DAMAGES,  
ATTORNEY FEES, EXPENSES, OR ANY OTHER DAMAGES ARISING OUT OF, OR IN  
CONNECTION WITH, ANY INFORMATION CONTAINED IN, OR AS A RESULT OF THE USE  
OF ANY CONTENT OR SERVICE BY YOU OR ANY THIRD PARTY, EVEN IF ADVISED OF THE  
POSSIBILITY OF SUCH DAMAGES.  
The terms HDMI and HDMI High-Definition Multimedia Interface, and  
the HDMI Logo are trademarks or registered trademarks of HDMI  
Licensing LLC in the United States and other countries.  
Oracle and Java are registered trademarks of Oracle and/or its affiliates.  
Other names may be trademarks of their respective owners  
Open Source License Notice  
Third party services may be terminated or interrupted at any time, and Samsung makes no  
representation or warranty that any content or service will remain available for any period  
of time. Content and services are transmitted by third parties by means of networks and  
transmission facilities over which Samsung has no control. Without limiting the generality of  
this disclaimer, Samsung expressly disclaims any responsibility or liability for any interruption or  
suspension of any content or service made available through this device.  
-
In the case of using open source software, Open Source Licenses are available on the  
product menu.  
Blu-ray Disc™, Blu-ray™ and the logos are trademarks of the Blu-ray Disc Association.  
DLNA®, the DLNA Logo and DLNA CERTIFIED® are trademarks,  
service marks, or certification marks of the Digital Living Network  
Alliance.  
Samsung is neither responsible nor liable for customer service related to the content and  
services. Any question or request for service relating to the content or services should be made  
directly to the respective content and service providers.  
22  
 
LImITEd WARRANTy TO ORIGINAL pURCHASER  
This SAMSUNG brand product, as supplied and distributed by SAMSUNG and delivered new, in the original carton to the original consumer purchaser, is warranted by SAMSUNG against  
manufacturing defects in materials and workmanship for a limited warranty period of:  
One (1) year parts and Labor*  
(*90 days parts and Labor for Commercial Use)  
This limited warranty begins on the original date of purchase, and is valid only on products purchased and used in the United States. To receive warranty service, the purchaser must contact  
SAMSUNG for problem determination and service procedures. Warranty service can only be performed by a SAMSUNG authorized service center. The original dated bill of sale must be presented  
upon request as proof of purchase to SAMSUNG or SAMSUNG's authorized service center. Transportation of the product to and from the service center is the responsibility of the purchaser.  
SAMSUNG will repair or replace this product, at our option and at no charge as stipulated herein, with new or reconditioned parts or products if found to be defective during the limited warranty  
period specified above. All replaced parts and products become the property of SAMSUNG and must be returned to SAMSUNG. Replacement parts and products assume the remaining original  
warranty, or ninety (90) days, whichever is longer.  
SAMSUNGs obligations with respect to software products distributed by SAMSUNG under the SAMSUNG brand name are set forth in the applicable end user license agreement. Non-SAMSUNG  
hardware and software products, if provided, are on an "AS IS" basis.  
Non-SAMSUNG manufacturers, suppliers, publishers, and service providers may provide their own warranties.  
This limited warranty covers manufacturing defects in materials and workmanship encountered in normal, and except to the extent otherwise expressly provided for in this statement, noncommercial  
use of this product, and shall not apply to the following, including, but not limited to: damage which occurs in shipment; delivery and installation; applications and uses for which this product was not  
intended; altered product or serial numbers; cosmetic damage or exterior finish; accidents, abuse, neglect, fire, water, lightning or other acts of nature; use of products, equipment, systems, utilities,  
services, parts, supplies, accessories, applications, installations, repairs, external wiring or connectors not supplied and authorized by SAMSUNG, or which damage this product or result in service  
problems; incorrect electrical line voltage, fluctuations and surges; customer adjustments and failure to follow operating instructions, cleaning, maintenance and environmental instructions that are  
covered and prescribed in the instruction book; product removal or reinstallation; reception problems and distortion related to noise, echo, interference or other signal transmission and delivery  
problems. SAMSUNG does not warrant uninterrupted or error-free operation of the product.  
THERE ARE NO EXPRESS WARRANTIES OTHER THAN THOSE LISTED AND DESCRIBED ABOVE, AND NO WARRANTIES WHETHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED  
TO, ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, SHALL APPLY AFTER THE EXPRESS WARRANTY PERIODS STATED ABOVE, AND NO  
OTHER EXPRESS WARRANTY OR GUARANTY GIVEN BY ANY PERSON, FIRM OR CORPORATION WITH RESPECT TO THIS PRODUCT SHALL BE BINDING ON SAMSUNG. SAMSUNG SHALL  
NOT BE LIABLE FOR LOSS OF REVENUE OR PROFITS, FAILURE TO REALIZE SAVINGS OR OTHER BENEFITS, OR ANY OTHER SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES  
CAUSED BY THE USE, MISUSE OR INABILITY TO USE THIS PRODUCT, REGARDLESS OF THE LEGAL THEORY ON WHICH THE CLAIM IS BASED, AND EVEN IF SAMSUNG HAS BEEN  
ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. NOR SHALL RECOVERY OF ANY KIND AGAINST SAMSUNG BE GREATER IN AMOUNT THAN THE PURCHASE PRICE OF THE PRODUCT  
SOLD BY SAMSUNG AND CAUSING THE ALLEGED DAMAGE. WITHOUT LIMITING THE FOREGOING, PURCHASER ASSUMES ALL RISK AND LIABILITY FOR LOSS, DAMAGE OR INJURY TO  
PURCHASER AND PURCHASER’S PROPERTY AND TO OTHERS AND THEIR PROPERTY ARISING OUT OF THE USE, MISUSE OR INABILITY TO USE THIS PRODUCT SOLD BY SAMSUNG  
NOT CAUSED DIRECTLY BY THE NEGLIGENCE OF SAMSUNG. THIS LIMITED WARRANTY SHALL NOT EXTEND TO ANYONE OTHER THAN THE ORIGINAL PURCHASER OF THIS PRODUCT,  
IS NONTRANSFERABLE AND STATES YOUR EXCLUSIVE REMEDY.  
Some states do not allow limitations on how long an implied warranty lasts, or the exclusion or limitation of incidental or consequential damages, so the above limitations or exclusions may not apply  
to you. This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.  
To obtain warranty service, please contact SAMSUNG customer care center.  
 
QUESTIONS OR COMMENTS?  
COUNTRy  
CALL  
OR VISIT US ONLINE AT  
WRITE  
Samsung Electronics America, Inc.  
85 Challenger Road Ridgefield Park,  
NJ 07660-2112  
1-800-SAMSUNG  
IN THE US  
(726-7864)  
AK68-02285U  
 

RCA Projection Television HDTV DVD Monitor User Guide
Renesas Network Card R5H30101 User Guide
Ricoh Universal Remote FOCUS 3 MODE User Guide
RIDGID Cordless Saw R3020 User Guide
Samson Power Supply PowerBrite Pro7 User Guide
Samson Speaker DB1500A User Guide
Samsung Flat Panel Television LA32R8 User Guide
Sanus Systems Cookware VMPO User Guide
Sanyo Air Conditioner 000 31 User Guide
Sanyo Camcorder VEM S 1 P User Guide