Samsung Air Conditioner Model AW089AB User Guide

OWNER’S  
INSTRUCTIONS  
AW069AB  
AW078AA  
AW088AA  
AW089AB  
AW108AA  
AW109AB  
AW128AA  
AW129AB  
AW1480A  
AW1880A  
AW2480C  
AW2490D  
WINDOW-TYPE  
ROOM AIR CONDITIONER  
( Cool )  
E
S
DB98-04272A(1)  
 
Contents  
PREPARING YOUR AIR CONDITIONER  
Safety Precautions .........................................................................................  
Description of Each Component ....................................................................  
Remote Control - Buttons ..............................................................................  
Getting Started ...............................................................................................  
Inserting the Remote Control Batteries ..........................................................  
2
4
5
6
7
OPERATING YOUR AIR CONDITIONER  
Cooling Your Room ........................................................................................  
Ventilating Your Room ....................................................................................  
8
9
Adjusting the Air Flow Direction Horizontally .................................................. 10  
Adjusting the Air Flow Direction Vertically ...................................................... 10  
PROGRAMMING YOUR AIR CONDITIONER  
Setting the On Timer ...................................................................................... 11  
Setting the Off Timer ...................................................................................... 12  
Setting the Sleep Timer .................................................................................. 13  
Selecting Energy Saving mode ...................................................................... 14  
RECOMMENDATIONS FOR USE  
Temperature and Humidity Ranges ................................................................ 15  
Cleaning Your Air Conditioner ........................................................................ 16  
Solving Common Problems ............................................................................ 17  
Technical Specifications ................................................................................. 17  
E-3  
 
Description of Each Component  
The design and shape are subject to  
change, depending on the model.  
Inner air flow blades  
(right/left orientation)  
Air outlet  
Air inlet (inside)  
Outer air flow blades  
(up/down orientation)  
Air filter  
(The air filter is  
located inside)  
Air inlet (Outside)  
Ventilation lever  
Power plug  
(The type of the power  
plug may differ, depending  
on the local power supply.)  
Fan speed indicators  
(LOW, MED, HIGH)  
Air flow blade swing indicator  
Temperature/Timer  
Energy Saver indicator  
Timer setting button  
settings  
Temperature adjustment  
buttons  
Sleep timer setting button  
Timer indicator  
Operating mode indicators  
(COOL, FAN)  
Remote Control sensor  
Air flow blade swing button  
Energy Saver button  
Fan speed adjustment  
button  
Operating mode selection  
button (COOL, FAN)  
ON/OFF button  
E-4  
 
Remote Control - Buttons  
Timer setting button  
Temperature adjustment  
buttons  
Sleep timer setting button  
Operating mode  
selection buttons  
Fan speed  
adjustment buttons  
Energy Saver button  
Air flow blade swing button  
ON/OFF button  
E-5  
 
Getting Started  
You have just purchased a Sam sung w indow -type room air conditioner w hich should be installed  
follow ing your installation m anual.  
Your Ow ners Instructions contain m uch valuable inform ation on using your air conditioner.  
Please take the tim e to read them as they w ill help you take full advantage of the units features.  
The booklet is organized as follow s.  
The follow ing figures are show n on pages 4 and 5:  
-
-
Description of Each Com ponent  
Rem ote control (buttons)  
They w ill help you find the buttons and understand the sym bols displayed.  
In the m ain part of the docum ent, you w ill find a series of step-by-step procedures for each  
function available.  
The illustrations in the step-by-step procedures use four different sym bols:  
NOTE  
IMPORTANT  
PRESS  
PUSH  
E-6  
 
Inserting the Remote Control Batteries  
You m ust insert or replace the rem ote control batteries w hen :  
You purchase the air conditioner  
The rem ote control does not w ork correctly  
Use two AAA, LR03 1.5V batteries.  
Do not use old batteries or different kinds of batteries together.  
Batteries may be completely discharged after 12 months, even  
if they have not actually been used.  
1
2
Push the battery cover on the rear of the remote control with your thumb  
in the direction of the arrow and remove it.  
Insert the two batteries, taking care to respect the polarities :  
+ on the battery with + on the remote control.  
- on the battery with - on the remote control.  
3
Close the cover by sliding it back until it clicks into place.  
E-7  
 
Cooling Your Room  
You m ust select the Cool m ode if you w ish to low er the tem perature  
in your room . You can also set the fan speed.  
Remote Control  
Control Panel  
Press the  
(On/Off) button.  
1
Result: The air conditioner starts up in the mode selected when the  
unit was last used.  
The unit beeps twice.  
The air conditioner is fitted with a protection mechanism to prevent  
the unit from being damaged when it is started immediately after  
being:  
Plugged in  
Stopped  
It will start up normally after three minutes.  
2
If the COOL indicator is not lit on the unit:  
Press the COOL button on the remote control  
or  
Press the Mode button on the unit one or more times until the COOL  
indicator lights up  
Result: The unit beeps each time you press the COOL/Mode button.  
The air conditioner starts up in the Cool mode.  
You can change modes at any time.  
3
To adjust the temperature, press the Temperature buttons on the remote  
control or unit one or more times until the desired temperature is displayed.  
The temperature can be set between 64°F and 86°F.  
Result: Each time you press the temperature buttons:  
– The temperature is adjusted by 1°F and displayed on  
the control panel  
– The unit beeps  
The air conditioner starts cooling if the room temperature is  
higher than the selected temperature.  
4
To set the fan speed:  
Press the HIGH, MED or LOW button on the remote control as desired.  
or  
Press the Fan Speed button on the unit one or more times until the  
desired Fan speed indicator lights up.  
5
To control the direction of the air flow, refer to page 10.  
E-8  
 
Ventilating Your Room  
If the air in your room is stale, you can air the room using the Fan feature.  
1
If you wish to discharge stale air, push the ventilation lever on the front of the  
unit to the right and open position ( ).  
Result: The air inside the room circulates and stale air is discharged  
outside.  
Otherwise, push the ventilation lever to the left and closed position (  
).  
Result: The air simply circulates inside the room.  
Remote Control  
Control Panel  
2
If necessary, press the  
(On/Off) button.  
Result: The air conditioner starts up in the mode selected when  
the unit was last used.  
The unit beeps twice.  
3
If the FAN indicator is not lit on the unit:  
Press the FAN button on the remote control  
or  
Press the Mode button on the unit one or more times until the FAN  
indicator lights up  
Result: The unit beeps each time you press the FAN/Mode button.  
The air conditioner starts up in Fan mode.  
You can change modes at any time.  
When the air conditioner is in the Fan mode, the temperature  
cannot be set or displayed.  
You cannot use Fan mode in the energy saving mode  
4
To set the fan speed:  
Press the HIGH, MED or LOW button on the remote control as desired.  
or  
Press the Fan Speed button on the unit one or more times until the  
desired Fan speed indicator lights up.  
5
To control the direction of the air flow, refer to page 10.  
E-9  
 
Adjusting the Air Flow Direction Horizontally  
Depending on the position of the unit in your room , you can adjust  
the orientation of the inner air flow blades on the right-hand side of  
the unit, thus increasing the efficiency of the air conditioner.  
Remote Control  
Control Panel  
Press the Swing button on the remote control or unit.  
Result: The inner blades swing automatically left and right.  
1
2
In the Energy Saving mode, the blades may stop when the  
compressor is off. For details on the Energy Saving mode, refer to  
page 14.  
To stop the blades moving left and right, press the Swing button again.  
To stop the blades in a specific position and orient the air flow in  
the corresponding direction, simply press the Swing button when  
the blades are in the desired position.  
Adjusting the Air Flow Direction Vertically  
The outer air flow blades can be adjusted to control the vertical air  
flow direction.  
RECOMMENDATION  
When...  
Adjust the blades to face...  
Cooling  
Upwards.  
Adjust the air flow blades to the desired position, by pushing them upwards or  
downwards.  
If you orient the air flow blades downwards and the unit operates in the Cool  
mode for long periods of time, dew may:  
Form on the surface of the blades  
Drip from the blades  
E-10  
 
Setting the On Timer  
The On Timer enables you to switch on the air conditioner automatically after  
a given time. You can select the On timer only when the air conditioner is off.  
Remote Control  
Control Panel  
1
Check that the air conditioner has been switched off; if necessary,  
press the (On/Off) button.  
2
Set the required mode by pressing the appropriate button:  
Cool or Fan on the remote control  
Mode button on the unit (press it one or more times until the  
appropriate operating mode indicator lights up)  
3
Set the operating time by pressing the Timer button on the remote control  
or unit one or more times until the desired time is displayed. The operating  
time can be set between 1 and 24 hours.  
Result: Each time you press the Timer button:  
– The time is adjusted by 1 hour and displayed on the control  
panel  
– The unit beeps  
The operating time is displayed and decreases automatically to  
indicate the remaining time.  
The air conditioner switches on automatically when the  
operating time reaches zero.  
You can change the setting mode, fan speed, and air flow direction  
after setting the On timer.  
To Cancel the On Timer  
To cancel the timer, press:  
Timer on the remote control or unit one or more times until "  
" is  
displayed.  
or  
on the remote control or unit (The air conditioner operates in the mode  
selected when the unit was last used.)  
E-11  
 
Setting the Off Timer  
The Off Tim er enables you to sw itch off the air conditioner  
autom atically after a given tim e. You can select the Off tim er only  
w hen the air conditioner is on.  
Remote Control  
Control Panel  
1
Check that the air conditioner has been switched on; if necessary,  
press the (On/Off) button.  
2
Set the operating time by pressing the Timer button on the remote control  
or unit one or more times until the desired time is displayed. The operating  
time can be set between 1 and 24 hours.  
Result: Each time you press the Timer button:  
– The time is adjusted by 1 hour and displayed on the control  
panel  
– The unit beeps  
The operating time is displayed and decreases automatically to  
indicate the remaining time.  
The air conditioner switches off automatically when the  
operating time reaches zero.  
You can change the setting mode, fan speed, and air flow direction  
after setting the Off timer.  
To Cancel the Off Timer  
To cancel the timer, press:  
Timer on the remote control or unit one or more times until "  
" is  
displayed.  
or  
on the remote control or unit (The air conditioner operates in the mode  
selected when the unit was last used.)  
E-12  
 
Setting the Sleep Timer  
The Sleep Tim er can be used w hen you are cooling your room to  
sw itch the air conditioner off autom atically after 8 hours.  
Remote Control  
Control Panel  
If you wish to switch the unit off at a specific time, refer to page 12.  
1
Make sure that you have selected either COOL mode.  
2
Press the Sleep button on the remote control  
or  
Press the Sleep button on the unit.  
Result:  
Each time you press a button, the unit beeps.  
The “SLEEP” passes through the control panel for about  
15 seconds and the "  
" will be displayed.  
The remaining time is displayed and decreased by 1 hour  
automatically to indicate the remaining time.  
The air conditioner will be controlled as illustration below.  
Cooling When the temperature has  
been increased by 2°F (after 1  
hour), it is maintained  
for 7 hours.  
To Cancel the Sleep Timer  
To cancel the timer, press:  
Sleep on the remote control.  
or  
Sleep on the unit.  
Result:  
The unit beeps.  
The SLEEP indicator is no longer displayed.  
The air conditioner operates in the mode selected last.  
If you select the Energy Saving mode in the Sleep Timer mode,  
the Sleep Timer will be cancelled and the air conditioner will start up  
in the Energy Saving mode.  
E-13  
 
Selecting Energy Saving Mode  
If you w ish to save energy w hen using your air conditioner,  
select the energy saving m ode w ith the Energy Saver button.  
Remote Control  
Control Panel  
To select the energy saving mode, press the Energy Saver button on the  
remote control or unit one or more times until the Energy Saver indicator  
lights up.  
1
Result:  
The fan and compressor cycle on and off together.  
The fan will continue to run for a short time after the  
compressor cycles off.  
If you would like the air conditioner to run in Fan mode, do not press  
the Energy Saver button. You cannot use the Fan mode in the  
energy saving mode.  
2
To stop the energy saving mode, press the Energy Saver button on the  
remote control or unit again.  
Result: The fan runs at all times, while the compressor cycles on and off.  
If you select the Sleep Timer in the Energy Saving mode, the Energy  
Saving will be cancelled and the air conditioner will start up in the  
Sleep Timer mode.  
E-14  
 
Temperature and Humidity Ranges  
The follow ing table indicates the temperature and humidity ranges  
w ithin w hich the air conditioner can be used.  
Mode  
Indoor Temperature  
Outdoor Temperature  
Indoor Humidity  
Cooling  
70°F to 90°F approx.  
70°F to 110°F approx.  
80% or less  
If the air conditioner is used at...  
Then...  
Higher temperature  
The automatic protection feature may be triggered and the air  
conditioner stopped.  
Lower temperature  
A water leakage or some other malfunction may happen if the  
heat exchanger freezes.  
Higher humidity levels  
Water may condense on and drip from the surface of the unit  
if it is used for long periods.  
E-15  
 
Cleaning Your Air Conditioner  
Be sure to clean the air filter periodically to m aintain the air conditioner  
in the best condition for a long period of tim e.  
When cleaning the air conditioner, turn it off and pull out the  
pow er plug.  
1
Open the front grille by pulling on the tabs of the unit.  
The removal of the front grille makes it easier to clean the air  
conditioner. After opening the front grille, lift it up as much as possible,  
then pull down to release it.  
2
3
Grasp the handle on the air filter and lift it slightly and then out to the front.  
Remove all dust on the air filter with a vacuum cleaner or brush.  
Front grille  
4
5
When you have finished, insert the air filter back into its original position.  
Wipe the surface of the unit with a neutral detergent  
and then wipe it again with dry cloth.  
(Be sure not to use benzene, solvent or other chemical products.)  
Front grille  
Grille groove  
Body guide  
If you...  
Then...  
Set the fan to “FAN” and let it for a few  
hours to dry the inside of the air  
conditioner thoroughly.  
Will not be using the  
air conditioner for a  
long period of time  
Switch the air conditioner off and  
unplug it from the wall socket.  
Clean the filter and outer surfaces.  
Set the fan to “FAN” and let it run for  
a few hours to dry the inside of the air  
conditioner thoroughly.  
Have not used the air  
conditioner for a long  
period of time  
E-16  
 
Solving Common Problems  
Before contacting an authorized service center, perform the follow ing sim ple checks.  
They m ay save you the tim e and expense of an unnecessary call.  
Problem  
Explanation / Solution  
Check that the circuit breaker used for the air conditioner has not been  
triggered.  
Check that the power cable is plugged into a wall socket and the socket is  
switched on, if necessary.  
The air conditioner does  
not operate at all  
Check that the temperature indicator on the unit is lit; if necessary,  
press (On/Off) on the remote control or unit.  
Check that there are no obstacles between you and the unit.  
Replace the remote control batteries if necessary.  
Check that you are close enough to the unit (seven metres/yards or less).  
The air conditioner does not  
operate with the remote  
control  
Check that you are pointing the remote control at the remote control sensor  
on the unit.  
Replace the remote control batteries if necessary.  
No beep is heard when you  
press (On/Off) on the  
remote control  
Check that the correct operating mode has been selected(COOL).  
The room temperature may be too low.  
The air conditioner does not  
cool  
Dust may be blocking the air filter; refer to page 14 for cleaning instructions.  
Check that there is no obstacle blocking the air flow into or out of the unit.  
Check that the air conditioner has been switched on; if necessary, press  
The air flow direction does  
not change when you press  
the Swing button  
(On/Off) on the remote control or unit.  
The blades may not move when the air conditioner runs in the Energy Saving mode.  
Check that the timer has been programmed correctly; refer to page 11~13.  
The timer is not correctly  
triggered  
Odors are permeating the  
room during air conditioning  
◆◆ Ventilate the room.  
Technical Specifications  
Design and specifications are subject to change w ithout notice.  
Model  
Power Supply  
115V~, 60Hz  
AW069AB AW109AB  
AW078AA AW128AA  
AW088AA AW129AB  
AW089AB AW1480A  
AW108AA  
AW1880A  
AW2480C  
AW2490D  
230 - 208V~, 60Hz  
E-17  
 
SAMSUNG ROOM AIR CONDITIONER (6000 BTU and Larger)  
LIMITED WARRANTY TO ORIGINAL PURCHASER  
This SAMSUNG brand product, as supplied and distributed by SAMSUNG ELECTRONICS AMERICA, INC. (SAM-  
SUNG) and delivered new, in the original carton to the original consumer purchaser, is warranted by SAMSUNG against  
manufacturing defects in materials and workmanship for a limited warranty period of:  
One (1) Year Parts and Labor, Five (5) Years Parts Warranty for Compressor  
This limited warranty begins on the original date of purchase, and is valid only on products purchased and used in the United  
States. Warranty repairs must be performed by SAMSUNG's authorized service center. To receive warranty service, the original  
dated bill of sale must be presented upon request as proof of purchase to SAMSUNG or SAMSUNG's authorized service center.  
SAMSUNG will repair or replace any part found to be defective at no charge, as stipulated herein, with new or reconditioned  
parts during the limited warranty period specified above. To request warranty service, the purchaser must contact SAMSUNG for  
problem determination and service procedures. SAMSUNG does not warrant uninterrupted or error-free operation of the prod-  
uct. All replaced parts and products become the property of SAMSUNG and must be returned to SAMSUNG. Replacement  
parts and products assume the remaining original warranty, or ninety(90) days, whichever is longer.  
In - Home Service: During the warranty labor period, in-home service will be provided subject to availability within the contigu-  
ous United States. In-home service is not available in all areas. If during in-home service repair can not be completed, it may be  
necessary to remove, repair and return the product. If in-home service is unavailable, SAMSUNG may elect, at our option, to  
provide for transportation of our choice to and from a SAMSUNG authorized service center. Otherwise, transportation to and  
from the SAMSUNG authorized service center is the responsibility of the purchaser.  
This limited warranty covers manufacturing defects in materials and workmanship encountered in normal, noncommercial use of  
this product and shall not apply to the following, including, but not limited to: delivery and installation; damage which occurs in  
shipment; applications and uses for which this product was not intended; failures or problems which are caused by products or  
equipment not supplied by SAMSUNG; accidents, misuse, abuse, neglect, misapplication, fire, water, lightning or other acts of  
nature; incorrect electrical line voltage, fluctuations or surges; damage caused by improper or faulty installation; product alter-  
ation or modification; improper or unauthorized repair; cosmetic damage or exterior finish; product with altered serial numbers;  
failure to follow operating and environmental instructions that are covered and prescribed in the instruction book; customer  
adjustments, routine maintenance and cleaning; consumable items such as filters; use of non-SAMSUNG or unauthorized parts,  
supplies, accessories or equipment which damage this product or result in service problems.  
THERE ARE NO EXPRESS WARRANTIES OTHER THAN THOSE LISTED AND DESCRIBED ABOVE, AND NO WAR-  
RANTIES WHETHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTIES OF MER-  
CHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, SHALL APPLY AFTER THE EXPRESS WARRANTY PERI-  
ODS STATED ABOVE, AND NO OTHER EXPRESS WARRANTY OR GUARANTY GIVEN BY ANY PERSON, FIRM OR  
CORPORATION WITH RESPECT TO THIS PRODUCT SHALL BE BINDING ON SAMSUNG. SAMSUNG SHALL NOT BE  
LIABLE FOR LOSS OF REVENUE OR PROFITS, FAILURE TO REALIZE SAVINGS OR OTHER BENEFITS, OR ANY  
OTHER SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES CAUSED BY THE USE, MISUSE OR INABILITY TO USE  
THIS PRODUCT, REGARDLESS OF THE LEGAL THEORY ON WHICH THE CLAIM IS BASED, AND EVEN IF SAMSUNG  
HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. NOR SHALL RECOVERY OF ANY KIND AGAINST  
SAMSUNG BE GREATER IN AMOUNT THAN THE PURCHASE PRICE OF THE PRODUCT SOLD BY SAMSUNG AND  
CAUSING THE ALLEGED DAMAGE. WITHOUT LIMITING THE FOREGOING, PURCHASER ASSUMES ALL RISK AND LIA-  
BILITY FOR LOSS, DAMAGE OR INJURY TO PURCHASER AND PURCHASERS PROPERTY AND TO OTHERS AND  
THEIR PROPERTY ARISING OUT OF THE USE, MISUSE OR INABILITY TO USE THIS PRODUCT SOLD BY SAMSUNG  
NOT CAUSED DIRECTLY BY THE NEGLIGENCE OF SAMSUNG. THIS LIMITED WARRANTY SHALL NOT EXTEND TO  
ANYONE OTHER THAN THE ORIGINAL PURCHASER OF THIS PRODUCT, IS NONTRANSFERABLE AND STATES YOUR  
EXCLUSIVE REMEDY.  
Some states do not allow limitations on how long an implied warranty lasts, or the exclusion or limitation of incidental or conse-  
quential damages, so the above limitations or exclusions may not apply to you. This warranty gives you specific legal rights, and  
you may also have other rights which vary from state to state.  
To obtain warranty service, please contact SAMSUNG at:  
SAMSUNG ELECTRONICS AMERICA, INC. - CONSUMER ELECTRONICS CUSTOMER SERVICE  
400 Valley Road, Suite 201 Mount Arlington, NJ 07856  
Tel: 973-601-6000, Fax: 973-601-6001  
1-800-SAMSUNG (1-800-726-7864)  
 

Radio Shack Model Vehicle 60 4382 User Guide
RCA Microcassette Recorder 34000 User Guide
Ricoh All in One Printer 2590 User Guide
Ryobi Trimmer RY26000 User Guide
Samsung Air Conditioner DB98 15114B5 User Guide
Samsung Blood Pressure Monitor BF 180M User Guide
Samsung Flat Panel Television LC750 QSG User Guide
Samsung Range FTQ307 User Guide
Samsung Tablet GT P7310 User Guide
Seagate Computer Drive Enterprise Value User Guide