Samson Stereo Amplifier Servo 260 User Guide

POWER  
SERVO 260  
A M P L I F I E R  
CLIP  
CLIP  
IDLE  
S A M S O N  
SERVO - 260  
STUDIO AMPLIFIER 120 WATT STEREO  
PROTECTION  
IDLE  
POWER  
MAX  
MAX  
SERVO 260 STUDIO AMPLIFIER  
S A M S O N  
CAUTION  
FUSE  
6A/250V  
RISK OF ELECTRIC SHOCK  
DO NOT OPEN  
!
TO PREVENT SHOCK DO NOT  
OPEN. NO USER SERVICABLE  
PARTS INSIDE. REFER SERVICING  
CAUTION  
T
O
Q
U
A
L
I
F
I
E
D
S
E
R
V
I
C
E
HEATSINK MAY BE HOT!  
DO NOT BLOCK AIRFLOW  
OR OVERHEATING MAY  
OCCUR.  
PERSONNEL. TO PREVENT FIRE  
OR SHOCK HAZARD DO NOT  
EXPOSE TO RAIN OR MOISTURE.  
CAUTION  
;
REPLACE WITH  
THE SAME TYPE FUSE AS  
INDICATED. UTILISER UN  
FUSIBLE DE RECHANGE DE  
MEME TYPE.  
~AC INPUT  
115V/60Hz, 490W  
R
L
S/N  
(UNBALANCED 10K/0dBM)  
RIGHT LEFT  
USE CLASS 2 WIRING MINIMUM LOAD IMPEDANCE 4  
LEFT  
RIGHT  
+RIGHT  
GROUND  
LEFT+  
INPUTS  
(BALANCED 10K/0dBM)  
• Rack-mount stereo power amplifier (2-space).  
• 130 watts per channel into 4 ohms (stereo).  
• 20 Hz to 50 kHz frequency response.  
The Servo 260 power amplifier is designed for  
fixed installations, recording and live performance use.  
Easily installed, this compact, 2-space rack-mount stereo  
power amplifier delivers 130 watts per channel into a 4  
ohm load, over a bandwidth of 20 Hz to 50 kHz. The  
260 features high-current output power transistors with  
a bipolar design and servo circuitry that continuously  
keeps DC output during idling at or near 0 volts. It also  
features balanced 1/4" Tip-Ring-Sleeve inputs as well as  
push-spring terminal outputs, front-panel clip, idle and  
protection lights and thermal and overcurrent protec-  
tion circuitry. The Servo 260 is convection cooled for  
silent operation, eliminating both fan noise and the  
need for filter maintenance. Housed in a rugged steel  
chassis, the Servo 260 uses high-quality component to  
ensure safe, reliable performance in all applications.  
Balanced 1/4TRS and unbalanced RCA inputs and push-  
spring terminal outputs.  
1/4and push-spring terminal outputs.  
Turn-on muting to prevent speaker thumps.”  
Servo protection circuitry continuously keeps DC output  
during idling at or near 0 V (thus keeping idle speakers at  
their 0 point).  
Protection circuitry against overheating and  
overcurrent.  
High-current output power transistors.  
Unique bipolar circuit design.  
Front-panel clip, idle and protection lights.  
Independent left- and right-channel input controls with  
41-position detents.  
Contact:  
Convection cooled (No Fan).  
All-steel chassis with new black matte titanium finish and  
anodized aluminum heat sink.  
Samson Technologies Corp., P.O. Box 9031, Syosset, NY 11791-9031 Phone: (516) 364-2244 Fax: (516) 364-3888 www.samsontech.com  
 

QSC Audio Thermometer DSP 4 User Guide
Raymarine GPS Receiver 530 User Guide
RedMax Saw SGCZ2450S User Guide
Renesas Network Card PCA7426G02 User Guide
Ryobi Outdoor Trimmer BC30 ZR30004 User Guide
Ryobi Saw R10633 User Guide
Sanyo Camcorder VCC 9300 User Guide
Sanyo Flat Panel Television CE22LD90DV B User Guide
Savin Printer SLP38C User Guide
Schneider Electric Outboard Motor Altivar 12 User Guide