Rolls Power Supply PB223 User Guide

LIMITED WARRANTY  
This product is warranted to the original consumer purchaser to be free from  
defects in materials and workmanship under normal installation, use and service for a  
period of one (1) year from the date of purchase as shown on the purchaser’s receipt.  
The obligation of Rolls Corporation under this warranty shall be limited to  
repair or replacement (at our option), during the warranty period of any part which proves  
defective in material or workmanship under normal installation, use and service, provided  
the product is returned to Rolls Corporation, TRANSPORTATION CHARGES PRE-  
PAID. Products returned to us or to an authorized Service Center must be accompanied  
by a copy of the purchase receipt. In the absence of such purchase receipt, the warranty  
period shall be one (1) year from the date of manufacture.  
This warranty shall be invalid if the product is damaged as a result of deface-  
ment, misuse, abuse, neglect, accident, destruction or alteration of the serial number,  
improper electrical voltages or currents, repair, alteration or maintenance by any person  
or party other than our own service facility or an authorized Service Center, or any use  
violative of instructions furnished by us.  
This one-year warranty is in lieu of all expressed warranties, obligations or  
liabilities. ANY IMPLIED WARRANTIES, OBLIGATIONS, OR LIABILITIES, IN-  
CLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANT-  
ABILITY AND FITNESS FOR A PARTICULAR PURPOSE, SHALL BE LIMITED IN  
DURATION TO THE ONE YEAR DURATION OF THIS WRITTEN LIMITED WAR-  
RANTY. Some states do not allow limitations on how long an implied warranty lasts, so  
the above limitation may not apply to you.  
IN NO EVENT SHALL WE BE LIABLE FOR ANY SPECIAL, INCIDEN-  
TAL OR CONSEQUENTIAL DAMAGES FOR BREACH OF THIS OR ANY OTHER  
WARRANTY, EXPRESSED OR IMPLIED, WHATSOEVER. Some states do not allow  
the exclusion or limitation of special, incidental or consequential damages so the above  
limitation or exclusion may not apply to you. This warranty gives you specific legal  
rights, and you may also have other rights which vary from state to state.  
PB223  
MIC POWER II  
Dual 48 Volt Phantom  
Power Supply  
PB223 Mic Power II  
Dual 48 Volt Phantom Power Supply  
- Power condenser microphones requiring phantom  
power  
- Operates on the included Rolls PS27 12VDC adapter  
- High frequency switching power supply to  
eliminate noise  
The PB223 is for powering two phantom powered microphones. The unit  
uses a 100kHz switching power supply to eliminate noise generated by  
common power supplies. The unit has pull-down resistors so it will work  
with any mixer.  
Rolls Corporation  
Salt Lake City, UT  
10/04  
User Guide  
 

Radio Shack Caller ID Box CID 2904 User Guide
RCA Camcorder Pro942 User Guide
RightWay GPS Receiver Mini S3 User Guide
Roper Range FGS326R User Guide
Samsung Cell Phone GH68 05976A User Guide
Samsung Clothes Dryer DV350AE User Guide
Samsung Digital Camera VP D30i User Guide
Sanyo Air Conditioner C3082 User Guide
Sanyo Digital Camera VPC T1284 User Guide
Sebo Vacuum Cleaner K2 KOMBI and K2 TURBO User Guide