Roland Electronic Keyboard F 50 User Guide

®ÂØÒňή  
F-50  
TurboStart  
digital piano  
It’s a Fact…  
Adjusting the Keyboard Touch  
Use the following procedure to adjust the keyboard  
touch:  
1. Press the LIGHT button until lit to select a light  
touch; press the LIGHT button until unlit to return  
to a medium touch.  
2. Press the HEAVY button until lit to select a  
heavy touch; press the HEAVY button until unlit  
to return to a medium touch.  
3. Simultaneously press the LIGHT and HEAVY  
buttons until lit to select a FIXED touch;  
simultaneously press the LIGHT and HEAVY  
buttons until unlit to return to a medium touch.  
The F-50 is a stylish and compact first piano for the  
modern home. The F-50 includes:  
20 CD-quality GM2/©sounds  
64-note polyphony  
88-key progressive hammer action keyboard  
1-track recorder  
Reverb, Chorus, Sympathetic Resonance  
Selecting Tones  
Use the following procedure to select a tone:  
1. Press a tone button (e.g. Piano, E.Piano,  
Harpsichord, etc.) to select a tone.  
2. Press the VARIATION button to select a tone  
variation.  
Refer to the Owner’s Manual, pg. 19 for more  
information.  
Refer to the Owner’s Manual, pg. 15 for more  
information.  
Playing a Demo Song  
Use the following procedure to play a demo song:  
Selecting Dual Tones  
Use the following procedure to select dual tones:  
1. Simultaneously press two tone buttons (e.g.  
Piano + Strings, E.Piano + Strings, etc.)  
2. Press any tone button to cancel dual tones.  
1. While holding down the DEMO button, press a  
key on the keyboard that corresponds to the  
song you want to hear  
Note: The first key on the left of the keyboard = Song  
#1, the second key on the left of the keyboard = Song  
#2, etc.  
Refer to the Owner’s Manual, pg. 16 for more  
information.  
2. Press the DEMO button until unlit to silence the  
instrument.  
Adding Reverb to a Tone  
Use the following procedure to add reverb to a tone:  
Refer to the Owner’s Manual, pp. 28–29 for more  
information.  
1. Select a tone as described under “Selecting  
Tones” or “Selecting Dual Tones.”  
2. Press the REVERB button until lit to add reverb  
to the tone.  
3. Press the REVERB button until unlit to turn-off  
the reverb effect  
Refer to the Owner’s Manual, pg. 17 for more  
information.  
TBS208 ©2004 Roland Corporation U.S., 5100 S. Eastern Ave., Los Angeles CA 90040 Faxback # 20241 Page 1  
 

Pyramid Car Audio Car Stereo System CDR27DX User Guide
Rangemaster Electric Heater U105510 01 User Guide
Renesas Computer Hardware FP 144 User Guide
Roberts Gorden Patio Heater POP ECA PGP ECA 015 to 0100 User Guide
Roland Computer Monitor DM 5 User Guide
Rosewill Computer Hardware RX81U ES User Guide
Samson Musical Instrument Amplifier 112C User Guide
Samsung Headphones BN68 01171B 03 User Guide
Samsung Microwave Oven M1713NCE User Guide
Samsung Printer SCX 1100 User Guide