Remington Hair Dryer DC 1880 User Guide

®
Model DC-1880  
Please Read Prior to Use  
 
1. Should the ALCI safety device trip (i.e., reset  
button pops out) during use, press the reset  
button. Should the air styler fail to reset, call  
Remington Customer Service at 800-736-4648.  
Never operate this appliance if it has been  
dropped in water; contact Remington Customer  
Service at 800-736-4648.  
ALCI SAFETY DEVICE  
This hair dryer is provided with an  
appliance leakage circuit interrupter  
(ALCI) safety device built into the plug.  
This device is designed to make the unit  
inoperable under some abnormal  
This message about  
Ground Fault Circuit  
Interrupters  
conditions, such as accidental immersion  
in water. The ALCI safety device is  
equipped with a test button so that its  
operation can be checked. This unit  
should be tested before each use to con-  
firm that the safety device is operational.  
2. The dryer is designed to work on ordinary  
household current only, 125 volts A.C.,  
60 Hz. It is not intended for commercial use.  
can save a life!  
If you must use your hair dryer in  
the bathroom, install a GFCI* now!  
Your local electrician can help you decide which  
type is best for you–a portable unit that plugs into  
the electrical outlet or a permanent unit installed  
by your electrician. The National Electrical Code  
now requires GFCI’s in bathrooms, garages, and  
outdoor outlets of all new homes.  
To test:  
After plugging in your hair dryer:  
3. This appliance is equipped with an automatic  
thermal limiter, which will cycle off when over-  
heated and come back on when cooled down.  
If the unit cycles off, unplug the cord for several  
minutes before restarting.  
1. Press the reset button on the  
ALCI device.  
2. Press the test button. The reset button  
will pop out. This verifies that the  
safety device is operating properly.  
Why do you need a GFCI?  
3. Press the reset button to reactivate  
your ALCI safety device.  
4. This appliance has a polarized plug (one  
blade is wider than the other). As a safety fea-  
ture, this plug will fit in a polarized outlet only  
one way. If the plug does not fit fully in the out-  
let, reverse the plug. If it still does not fit, con-  
tact a qualified electrician. Do not attempt to  
defeat this safety feature.  
Electricity and water don’t mix. If your hair dryer  
falls in water while it’s plugged in, the electric  
shock can kill youeven if the switch is “off.”  
A regular fuse or circuit breaker won’t protect  
you under these circumstances. A GFCI  
offers you greater protection.  
4. Your hair dryer is now ready for use.  
Note: This unit may automatically trip  
when unplugged. If so, the unit must be  
reset after it is plugged in. After  
following the above testing procedure,  
should the indicator device not function  
properly, call Remington Customer  
Service at 800-736-4648.  
A GFCI can save your life!  
Compared to that, the price is small!  
Don’t wait…  
install one now!  
*GFCI is a sensitive device that reacts immedi-  
ately to a small electric current leak by stopping  
the electricity flow.  
 
ProAir® Ionic Features  
Hair Type  
Recommended Settings  
BASIC DRYING TECHNIQUES  
Low Heat  
1. Gently towel dry hair to remove excess water.  
Avoid rubbing hair with towel this creates split  
ends and frizziness. Detangle hair with a wide-  
toothed comb.  
Low Heat  
Medium Heat  
Medium Heat  
High Heat  
High Heat  
High Heat  
1875 Watts  
2. Set dryer to a high heat and speed.Remove some  
of the additional moisture from your hair by briskly  
blow drying it all over, using your fingers to "comb"  
through hair.  
COOL SHOT  
Once you fully dry your hair and fashion the style, press  
the cool shot button to setthe style.  
3. When hair is almost dry, lower the heat and speed  
settings and begin to style.  
4. Divide hair into manageable sections.Begin at the  
nape of your neck and brush hair, following the  
movement of the brush with the dryer. Continue  
working your way up your scalp,then to the sides  
and the front,drying small sections at a time.  
Air intake  
grille  
Cool shot  
HAIR CARE TIPS  
Keep the dryer about 8 inches away from your head  
to avoid burning scalp or damaging hair.  
Heat settings  
Always keep the dryer pointed down the hair shaft  
5. Once your desired style is achieved,push the Cool  
Shot button to set the style with a cool flow of air.  
Speed settings  
to smooth the cuticle and create a silky, shiny style.  
To help prevent heat damage and add shine,spritz  
damp hair with a heat protection spray before blow  
drying.  
To create a style with lots of body, apply volumizing  
mousse to towel-dried hair. Distribute it evenly from  
roots to ends,then blow dry as usual.Hair will be  
soft,shiny and full of volume.  
For a super smooth,salon-like blow dry, finish by  
running a straightening iron over dried hair.  
For a quick touch-up between shampoos,mist hair  
6-foot cord  
with  
hang loop  
FOR STRAIGHT, SMOOTH HAIR  
Use a large, round brush or paddle brush to brush hair  
from underneath. Pull hair down until the hair is fully  
extended and taut. With the dryer on a high heat and  
speed, aim the dryer nozzle down the length of the hair.  
Repeat with all sections of hair until it is completely  
dried. Lock in the style with the Cool Shot button.  
• Ionic conditioning  
Ergonomic handle for  
comfortable grip  
Separate heat and speed  
switches for maximum  
styling flexibility  
Safety plug with test  
and retest features  
for immersion shock  
protection  
FOR CURLY HAIR  
-3 heat settings  
-2 speed settings  
to dampen it,then style with dryer.  
Use dryer on a low heat and speed setting and move  
it quickly about your head. As you dry your hair,  
scrunch it with your favorite styling product or twirl  
strands of hair around your fingers to add definition.  
When finished drying,lock in the style with the Cool  
Shot button.  
Cool Shot  
• 1875 watts  
Aerodynamic design with  
high quality finish  
• 6-foot cord with  
hang loop  
 
MAINTENANCE INSTRUCTIONS  
1.Do not attempt to repair the appliance yourself.  
2.Keep air intake grille clear of dust accumulation.  
See Cleaning Instructionsbelow. No other  
Full Two-Year Warranty  
Remington Products Company, L.L.C. warrants this product  
against any defects that are due to faulty material or work-  
manship for a two-year period from the original date of con-  
sumer purchase. This warranty does not include damage to  
the product resulting from accident or misuse.  
maintenance or lubrication is required.  
3.If the cord becomes twisted due to use,periodically  
straighten.Store appliance and cord where they will  
not be damaged.Do not wrap cord around dryer.  
If the product should become defective within the warranty  
period, we will repair it or elect to replace it free of charge.  
Please call 800-736-4648.  
REMINGTON® SHALL NOT BE RESPONSIBLE FOR ANY  
INCIDENTAL, SPECIAL OR CONSEQUENTIAL DAMAGES.  
CLEANING INSTRUCTIONS  
This warranty gives you specific legal rights, and you may  
also have other rights that vary from state to state. Some  
states do not allow the exclusion or limitation of incidental,  
special or consequential damages.  
1.The ProAir® dryer needs minimum maintenance  
to ensure best performance and long life.  
2.The air intake grille should be cleaned regularly  
since a dirty or clogged grille will impair the  
efficiency of the dryer.  
®
REMINGTON MONEY-BACK OFFER  
If within 30 days after you have purchased your Remington®  
dryer, you are not satisfied and would like a refund, take the  
dryer and sales slip indicating purchase price and date of  
purchase to the retailer from whom the dryer was purchased.  
Remington® will reimburse all retailers who accept this item  
within 30 days from date of purchase. If you have any  
questions concerning the money-back guarantee, please  
call 800-736-4648.  
3. To clean air intake grille,make sure dryer is turned  
off and plug is pulled out of socket.If unit is dirty  
wipe clean with a damp cloth.  
STORAGE  
When not in use,unplug the unit.Allow it to cool,and  
store out of reach of children in a safe,dry location.  
125 VAC, 60Hz, 1875W  
Questions or comments:  
Call 800-736-4648 or visit  
Never wrap the cord around the appliance,as this will  
cause the cord to wear prematurely and break.Handle  
cord carefully, and avoid jerking,twisting, or straining  
it,especially at plug connections.  
Remington and ProAir are trademarks of Remington Products Company, L.L.C.  
©2004 R.P.C.,L.L.C.Rev.1.04 Job# WPC03-146 Part# 15155  
This product is listed by Underwriters  
Laboratories,Inc. and bears the mark.  
Remington Products Company, L.L.C.  
800-736-4648  
MADE IN CHINA  
 

QVS Surge Protector PP103 12C User Guide
Radio Shack Cordless Telephone ET 153 User Guide
Raypak Electric Heater Finned Water Tube Water Heaters User Guide
RCA Conference Phone 25201RE1 User Guide
RocketFish Computer Hardware RF PHD35 User Guide
Rosewill Switch RHUB 300 User Guide
Samsung DVD VCR Combo V70 User Guide
Samsung Laptop Q30 User Guide
Samsung Satellite Radio SADPCI 202 User Guide
Sanyo Refrigerator MBR 704G User Guide