Radio Shack Car Video System PLD187V User Guide

PLD187V  
OWNER'S MANUAL  
Mobile Video System  
Anti Theft Flip Down Detachable Panel  
VFD Moving Display  
Car DVD/VCD/CD/MP3 Player  
AM/FM Digital Pll Tuning Radio  
Auxiliary Input Function  
Parental Control  
Remote Control  
 
SAFETY INFORMATION  
CAUTION:  
THIS DVD PLAYER IS A CLASS I LASER PRODUCT. HOWEVER THIS DVD  
PLAYER USES A VISIBLE/INVISIBLE LASER BEAM WHICH COULD CAUSE .  
HAZARDOUS RADIATION EXPOSURE IF DIRECTED. BE SURE TO OPERATE  
THE DVD PLAYER CORRECTLY AS INSTRUCTED.  
USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF  
PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN  
HAZARDOUS RADIATION EXPOSURE.DO NOT OPEN COVERS AND DO NOT  
REPAIR YOURSELF. REFER SERVICING TO QUALIFIED PERSONNEL.  
WARNING:  
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS  
EQUIPMENT TO RAIN OR MOISTURE.  
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, AND ANNOYING  
INTERFERENCE, USE ONLY THE RECOMMENDED ACCESSORIES.  
THIS DEVICE IS INTENDED FOR CONTINUOUS OPERATION.  
This product incorporates copyright protection technology that is protected  
by method claims of certain U.S. Patents and other intellectual property rights  
owned by Macrovision Corporation and other rights owners.Use of this  
copyright protection technology must be authorized by Macro vision Corporation,  
and is intended for home and other limited viewing uses only unless  
otherwise authorized by Macrovision Corporation. Reverse engineering or  
disassembly is prohibited.  
REGION MANAGEMENT INFORMATION:  
This DVD Player is designed and manufactured to respond to the Region  
Management Information that is recorded on a DVD disc. If the Region number  
described on the DVD disc does not correspond to the Region number of this  
DVD Player, this DVD Player cannot play this disc.  
2
 
DISC NOTES  
unusable) depending on your handle it  
and conditions in the usage environment.  
Note these scratches are not an  
Disc formats supported by this  
player  
DVD  
12 cm disc  
V I D E O  
indication of any problem with the player.  
Label side  
up  
(Single-sided disc only)  
Video CD  
12 cm disc  
CD  
Do not touch  
the  
underside  
of the disc  
12 cm disc  
MP3  
12 cm disc  
MP3  
CD-RW  
Do not  
bend  
Discs which cannot be played  
with this player  
DVD-ROM  
DVD-R/DVD-RAM  
CDV  
Wipe the disc from  
center  
toward the outside  
edge  
CD-G  
Handling and Cleaning  
Dirt, dust, scratches and warping disc  
will cause misoperation.  
Do not place stickers or make  
scratches on discs.  
Preparing New Discs with Rough  
Spots  
A new disc may have rough edges on  
its inside and outside edges.If a disc  
with rough edges is used, the proper  
setting will not be performed and the  
player will not play the disc.Therefore,  
remove the rough edges in advance  
by using a ball point pen or pencil as  
shown on the right.To remove the  
rough edges, press the side of the pen  
or pencil against the inside and outside  
edges of the disc.  
Do not warp discs.  
A disc should always be kept in its  
case when not in use to prevent from  
damaging.  
Do not place discs in the following  
places:  
1.Direct sunlight  
2.Dirty, dusty and damp areas  
3.Near car heaters  
4.On the seats or dashboard  
Rough spots  
on  
outside edge  
Disc Cleaning  
Use a dry soft cloth to wipe the surface.  
If the disc is quite dirty, use a soft cloth  
slightly moistured with isopropyl (rubbing)  
alcohol. Never use solvents such as  
benzine, thinner or conventional record  
cleaners as they may mar the surface of  
the disc.  
Ball point pen  
or pencil  
Rough spots  
on inside  
edge  
Note:  
A disc may become somewhat scratched  
(although not enough to make it  
3
 
INSTALLATION  
NOTES:  
Choose the mounting location where the unit will not interfere with the normal  
driving function of the driver.  
Before finally installing the unit, connect the wiring temporarily and make sure  
it is all connected up properly and the unit and the system work properly.  
Use only the parts included with the unit to ensure proper installation. The use  
of unauthorized parts can cause malfunctions.  
Consult with your nearest dealer if installation requires the drilling of holes or  
other modifications of the vehicle.  
Install the unit where it does not get in the driver's way and cannot injure the  
passenger if there is a sudden stop, like an emergency stop.  
If installation angle exceeds 30 from horizontal, the unit might not give its  
optimum performance.  
30  
Avoid installing the unit where it would be subject to high temperature, such  
as from direct sunlight, or from hot air, from the heater, or where it would be  
subject to dust, dirt or excessive vibration.  
DIN FRONT/REAR-MOUNT  
This unit can be properly installed either from "Front"(conventional DIN  
Front-mount) or "Rear"(DIN Rear-mount installation, utilizing threaded  
screw holes at the sides of the unit chassis). For details, refer to the following  
illustrated installation methods.  
4
 
INSTALLATION  
DASH BOARD  
METAL MOUNTING  
STRAP  
HEX NUT  
SPRING WASHER  
PLAIN WASHER  
TAPPING SCREW  
CONSOLE  
SLIDE BRACKET  
HOUSING  
HEX BOLT  
KEY PLATE  
PLASTIC TRIM OUT  
KEY PLATE  
1.WHILE INSTALLING THE FRONT PANEL, PLEASE MOUNT THE LEFT SIDE FIRST,  
AND MAKE THE DIRECTION HOLE ON THE FRONT PANEL AIM AT THE LEFT GUIDE  
ON THE UNIT  
2.THAN PUSH THE RIGHT SIDE TO MOUNT THE RIGHT GUIDE  
3.PUSH IT TO INSTALL THE  
FRONT PANEL COMPLETELY .  
5
 
INSTALLATION  
CAUTION: DO NOT INSTALL THE DETACHABLE PANEL BEFORE  
CONNECTING THE WIRE.  
1. The unit is designed for negative terminal of the battery which is connected to the  
vehicle metal. Please confirm it before installation.  
2. If the car interior is extremely hot, as after being parked in the sun, do not use the  
player until the car has been driven for a while to cool off the interior.  
3. Press the OPEN button to flip down the front panel (see fig.1), Slide the guide knob  
to remove the right side first, then take away the front panel. (see fig.2) and put it in the  
protective case (see fig.3) for safe keeping.  
4. Install the front panel back into its bracket and then push it back to the position for  
playing (see fig.4).  
FRONT PANEL  
GUIDE KNOB  
OPEN BUTTON  
(FIG.1)  
(FIG.2)  
PROTECTIVE CASE  
FRONT PANEL  
FRONT PANEL  
(FIG.3)  
(FIG.4)  
6
 
ELECTRIC CONNECTION  
WIRING CONNECTION  
MAIN UNIT  
AUX(optional)  
RCA CABLE  
VIDEO IN YELLOW  
RCH IN RED  
ANTENNA CONNECTOR  
IGNITION RED  
SWITCH(B+)  
LCH IN WHITE  
GREY SUBWOOFER  
VIDEO OUT 2 YELLOW  
COAXIAL OUT BROWN  
RCH RED  
REAR RCA OUTPUT  
CABLE (optional)  
CHOKE  
BOX  
MEMORY  
BACK-UP(B+)  
YELLOW  
BLACK  
LCH WHITE  
FRONT RCA OUTPUT  
CABLE  
FRONT RCA RED  
VIDEO OUT 1 YELLOW  
FRONT RCA WHITE  
R
GROUND(B-)  
L
(FOR RCA LINE OUT VERSION ONLY)  
FUSE  
AUTO  
ANTENNA  
BLUE  
GREY  
WHITE  
FRONT  
FRONT  
Rch SPK.  
Lch SPK.  
WHITE/BLACK  
GREY/BLACK  
VIOLET  
REAR  
GREEN  
REAR  
Rch SPK.  
Lch SPK.  
GREEN/BLACK  
VIOLET/BLACK  
7
 
REMOTE CONTROL  
16  
3
1
17  
2
15  
14  
23  
12  
18  
19  
5
6
8
22  
4
9
20  
10  
25  
7
21  
11  
24  
13  
Press it to change the display to clock display.  
Press it to change between RADIO ,DISC and AUX IN mode.  
Press it to stop playback.  
1. CLK  
2. MODE  
3. STOP  
4. SETUP  
5. MO/ST(AUDIO)  
Display the SETUP menu.  
In radio mode, press it to select STEREO or MONO mode (In disc  
mode,press it to changing of the AUDIO soundtrack on multi-  
audio soundtrack DVD disc. Changing of the sound mode of the  
VCD/CD disc)  
Changing of the SUBTITLE language on multi-subtitle language  
DVD disc. In radio mode,.Press this button for distance reception  
when you are located at weak signal location, depress it for  
stronger signal.  
6. SUBTITLE  
LO/DX  
Switch the Repeat mode of DVD/VCD/CD/MP3 disc.  
Disc search button, cooperatively used with numeric buttons  
7. REPEAT  
8. GOTO  
Press  
to skip to the next track & press  
to skip back one track.  
9.  
/
(Note: In DVD mode, press continually the twice to skip back one)  
Press it repeatedly to change mode through volume ,bass, treble,  
balance and fader modes.  
10. SEL  
Press it to adjust volume level  
In case of the SETUP MENU mode,  
11. VOL+/VOL-  
12.  
/
/
/
buttons served as  
/
/
/
cursor buttons to select item left/right,ahead/back.  
Press it to display the root menu of the DVD disc.Press and hold  
for more than 2 seconds can have SUBWOOFER, press it again  
for more than 2 seconds to release this mode.  
Display statistical disc information during playback (To change  
the band in radio stations)  
13.MENU  
SUB WOOFER  
14.BAND(OSD)  
Press it to turn on the unit ,press it again to turn off.  
Press once to pause a play, press again to resume playback.  
Press it to mute down sound.  
15.POWER  
16.PLAY/PAUSE  
17.MUTE  
Display the TITLE menu that is stored in DVD disc changing  
between PBC ON and PBC OFF on the VCD disc.(Auto store  
and preset scan function in radio stations .)  
18.TITLE/PBC  
(A/P)  
Changing for slow forward/reverse playback motion  
Changing of the view angle on multi-angle DVD disc.  
Press it to turn to equalization function.  
19. SLOW  
20.ANGLE  
21.EQ  
22. /  
23.ENTER  
Press  
to start forward rapidly &  
to reverse rapidly.  
Confirm the Track/Chapter selected with the number key or  
selected with the cursor buttons on TV screen.  
Numeric buttons.  
24. 0 - 9  
25.+10  
Tens digit select button, cooperatively used with numeric buttons.  
8
 
REMOTE CONTROL  
Preparing the Remote Control  
Inserting the Batteries  
1.First push to inside as the direction indicated by the arrow (See )And then  
1
Remove the battery holder as the direction indicated by the arrow (See ).  
2
2.Replace the battery Set a new battery property with (+)side up as illustrated  
(See ).  
3
3.Insert the battery holder. Push in the holder to the original position(See 4 ).  
Using the Remote Control  
Face the remote control towards the player front face IR mark (remote control signal  
receiver).  
Operation angle: About 30 degree in each the direction of the front of the IR mark.  
To prevent damage to the unit, be sure to follow the connection diagram  
(page 7).  
9
 
BASIC OPERATION  
5
1
13  
2
17  
15  
22 18  
4
12 16 14  
6
7
8
10  
11  
3
9
20 21  
19  
EJ  
1.OPEN BUTTON  
Press it to flip down the front panel then you can insert the cd disc into the cd  
compartment. And you can find the (EJECT)button .Press it to eject the disc.  
2-3.VOL+/VOL- & SEL BUTTON  
Press it to change audio mode through volume, bass, treble, balance, and fader  
modes. Rotate VOL + /VOL- knob to adjust the selected mode.(The correspon-  
ding value will show on the display.)  
A.Volume:Adjust volume level by  
using VOL + / VOL - knob..  
Note: The unit is initially set to  
volume mode.  
B.Bass:Press SEL button one time.  
Adjust bass level by using VOL + / VOL -  
knob.  
VOLUME 6  
BASS +8  
..........................  
C.Treble:Press SEL button two times.  
Adjust treble level by using VOL + / -  
knob.  
D.Balance:Press SEL button three times.  
Adjust sound balance between left and  
right speakers by using VOL + / VOL -  
knob.  
TREBLE -2  
..........................  
Balance  
-2  
E.Fader:Press SEL button four times.  
Adjust sound balance between front  
and rear speakers by using VOL + /  
VOL - knob.  
Fader  
0
10  
 
BASIC OPERATION  
4.BAND BUTTON  
In RADIO mode, press the BAND button on the front panel or on the remote  
control to select your desired radio band and word which band is selected will be  
displayed on LCD. Press it to change the bands as below :  
FM  
MW  
LW  
FM  
MW  
FM  
AM  
For 3 Bands (Europe)  
For 2 Bands (Europe)  
For 2 Bands (USA)  
5.EQ BUTTON  
Press it to turn to equalization function and to select desired audio mode.  
There are four kinds of mode as below:  
JAZZ  
CLAS  
POP  
ROCK  
6-7-8-9-10-11.PRESET STATION  
A.To memorize the current frequency, press any one of the six preset buttons[1-6]  
on the front panel or on the remote controller hold for more than 2 seconds.  
B.To recall the preset memory, press one of the preset buttons [1-6].  
C.Press 1/TOP button to select the first track/chapter to play.  
a.In the state of VCD/CD/MP3 disc playing, press the button on the front panel  
to select the first track/chapter to play.(depend on the disc used for VCD)  
b.In the state of DVD disc playing, the 1TOP button is not available.  
D.Long press 2/RPT button to select repeat mode as follow.  
VCD/CD:  
REP-ONE  
REP-ALL  
DVD:  
CHAPTER REPEAT ON  
TITLE REPEAT ON  
REPEAT OFF  
a.Continuously repeat at the current chapter/track, when selected  
REP-ONE mode.  
b.Select REP-ALL mode to continuously repeat all chapter/track on the  
current disc.  
c.REPEAT feature does not support VCD2.0 (with PBC ON).  
E.Long press 3/INT button to scan disc.  
a.In the state of CD disc playing,press the 3/INT button on the front panel  
to play the previous 6 seconds part of each track/chapter on disc.  
b.In the state of DVD/MP3 disc playing, the 3/INT button is not available.  
c.In the state of VCD disc playing , long press the 3/INT button, the screen will  
display as follow (long press it again will release this mode.):  
SELECT DIGEST TYPE:  
TRACK DIGEST  
DISC INTERVAL  
TRACK INTERVAL  
11  
 
BASIC OPERATION  
/
and then press the ENTER button to confirm .  
/
/
1). You can use the  
buttons on the remote control to select the item,  
2). In Track Digest OR Disc/Track Interval MODE.  
/
/
/
You can use the  
ENTER to confirm .  
buttons to select the items ,and then press the  
You can also select the items using the corresponding number buttons, and  
then press the ENTER to confirm .  
d.In the state of DVD disc playing , long press the 3/INT button, the screen will  
display as follow (long press it again will release this mode.):  
SELECT DIGEST TYPE:  
TITLE DIGEST  
CHAPTER DIGEST  
TITLE INTERVAL  
CHAPTER INTERVAL  
/
/
and then press the ENTER button to confirm .  
/
1). you can use the  
buttons on the remote control to select the item,  
2). In Title/Chapter Digest OR Title/Chapter Interval MODE.  
/
/
/
You can use the  
ENTER to confirm .  
buttons to select the items ,and then press the  
You can also select the items using the corresponding number buttons, and  
then press the ENTER to confirm .  
F. Long press 4/RDM to play disc in random.  
In the DVD/VCD/CDdisc playing, press the 4/RDM button on the front panel  
to play in random (depend on the disc used for VCD).  
12.AS/PS BUTTON  
When shortly pressing the APS button on the front panel or the A/P button on the  
remote controller, the radio searches for each preset station. When the field  
strength level is more than the threshold level of stop level, the radio is holding at  
that preset number for few seconds with releasing mute, and then searches again.  
In FM band, FM 1,FM 2 and FM 3 is checked one at a time When long pressing the  
APS or A/P button (more than 1 second), the radio searches from the current  
frequency and checks the signal strength level until 1 cycle search is finished.  
And then 6 strongest stations are preset to the corresponding preset number.  
The AS operation is implemented in the each band of selected band. When the  
AS operation is finished, the radio executes the preset scan.  
13.MU BUTTON  
Press it to mute down sound. Press it again to release this mode and recover  
previous volume level.  
14.CLK BUTTON  
Press it to change the display to clock display. Press it again to return to previous  
display. In clock display, press and hold for about 2 seconds until the hour display  
flashes. Rotate VOL+/- button to adjust hours ,press CLK button to flash minute  
then Rotate VOL+/- button to adjust minutes.  
12  
 
BASIC OPERATION  
15.PWR BUTTON  
Press it to turn on the unit. Press it again to turn off.  
16.  
BUTTON  
Pressing  
press  
during playback will stop play temporary. Return to normal playback,  
once again.  
17.  
/
A.When long Pressing the  
BUTTONS  
/
button (more than 2 seconds ) during play.The  
speed of rapid forward/reverse changes according to the disc as follow.  
DVD/VCD/CD/MP3:  
Normal Playback 2x  
4x  
8x  
16x  
B.Shortly press the  
/
button during playback to skip to next track or back  
one track.(Note: In DVD mode, press continually the  
back one track.)  
Note:For some VCD 2.0 dics (PBC-playback control),  
may be unavailable.  
C.Press UP or DN button on the remote controller or  
button twice to skip to  
and buttons  
on the fornt panel  
/
to manually tune up or down for your desired station. Press them hold for more  
than 2 seconds to automatically tune up or down for the stronger station.  
18.MOD BUTTON  
Press it repeatedly select DISC ,AUX IN , RADIO mode.  
19.EJECT BUTTON  
In CDP playing ,Press the eject button to eject the disc form the disc slot.  
20.FLASHING LED  
If the front panel is not on the main unit, LED will be flashing.  
21.RESET BUTTON  
RESET button is placed on the housing and must be activated with either a  
ballpoint pen or thin metal object. The RESET button is to be activated for  
the following reasons:  
A. Initial installation of the unit when all wiring is completed.  
B. All the function buttons do not operate.  
C. Error symbol on the display.  
Note:If press RESET button , the unit can't work yet, please use a cotton swab  
soaked in isopropyl alcohol to clean the socket on the back of the front panel.  
22.ST BUTTON  
Press ST button to select stereo or mono reception for radio stations.  
13  
 
BASIC OPERATION  
MP3/WMA/JPEG DISC PLAY  
1.When inserting an MP3/WMA/JPEG disc  
Ex: When Mp3 file is detected.  
4
5
6
1 .Current track(file)(highlighted bar)  
.Current track (file) number/total  
number of tracks(files) in the current  
folder.  
2
00:56  
04:07  
3
2
Repeat one  
003/112  
.Elapsed playing time of the current  
track(not available for JPEG disc)  
.total playing time.( not available for  
JPEG disc)  
3
4
Mp3  
K
P
Mp3  
Mp3  
1
woman 1  
ton  
.Selected playback mode  
.Operation mode icon.  
5
6
..........n..e.w.  
(Play),  
(stop), (pause), (forward)  
(reverse).  
In stop mode , use  
/
/
/
on the remote control to select the item or folder,  
then press ENTER button to confirm.  
Pressing REPEAT button repeatedly can select two kinds of repeat play mode.  
2. REP-ONE:  
Play the same song over and over again.  
3. REP-ALL:  
Play all songs in the discover and over again.  
In the playback, use  
In the playback, when long pressing the  
than2 seconds ) or short press  
reverse.  
or  
to skip an item ahead or back.  
button on the front panel (more  
on the remote control to rapid forward/  
/
/
AUX OPERATION  
When the unit connect external A/V , you can press MODE to switch the AUX  
input mode.  
14  
 
BASIC OPERATION  
ON-SCREEN DISPLAY FUNCTION  
Press the OSD button during  
playback to display the contents of the  
current disc on the screen.  
Example :  
2.Example for VCD/SVCD/CD:  
A.Press OSD for the first time:  
SINGLE ELAPSED  
1. DVD:  
A.Press OSD for the first time:  
TRACK 01/16  
00:49  
TITLE ELAPSED  
B.Press OSD for the second time:  
TT 01/01 CH 01/38  
0:02:06  
SINGLE REMAIN  
Title Number, Total Title Number,  
Chapter Number, Total Chapter Number  
of this Title of the disc currently being  
played will be shown on the screen,  
along with the elapsed time.  
TRACK 01/16  
02:45  
C.Press OSD for the third time:  
B.Press OSD for the second time:  
TOTAL ELAPSED  
TRACK 01/16  
00:60  
TITLE REMAIN  
D.Press OSD for the fourth time:  
TT 01/01 CH 01/38 3:24:36  
TOTAL REMAIN  
C.Press OSD for the third time:  
TRACK 01/16  
78:46  
CHAPTER ELAPSED  
TT 01/01 CH 01/38 0:02:56  
E.Press OSD for the fifth time:  
The message on the screen will be  
cleared for SVCD and VCD.  
D.Press OSD for the fourth time:  
NOTE:  
For CD and MP3,the message will  
always display on the screen.  
CHAPTER REMAIN  
3.Example for MP3:  
Each time OSD is pressed, the message  
displayed on screen changes as follows:  
TT 01/01 CH 01/38 0:04:32  
E.Press OSD for the fifth time:  
The message on the screen will be  
cleared.  
SINGLE ELAPSED  
SINGLE REMAIN  
15  
 
BASIC OPERATION  
Multi-audio Language Function  
- When no different subtitle language  
are recorded, will be displayed  
at screen left top corner.  
For DVD:  
Press AUDIO during playback.  
Each time the button is pressed,  
number of the audio soundtrack  
language changes on sequential order.  
NOTES:  
- The language number is different  
according to the disc.  
- Some disc only contain one language  
soundtrack  
- When no different language  
Multi-angle Function  
(for DVD Only)  
Press ANGLE during playback. Each  
time the button is pressed, number of  
the angle changes in sequential order.  
Notes:  
- The angle number is different  
according to the disc.  
soundtrack are recorded  
will be  
- The function only work for disc having  
scenes recorded at different angles.  
- When no different angle are recorded,  
will be displayed at screen left top  
corner.  
display at screen left top corner.  
For VCD/CD:  
Press AUDIO during playback. It is  
possible to switch the sound between  
monaural and stereo sound.  
MONO LEFT  
MONO RIGHT  
STEREO  
MIX-MONO  
Title Menu Function  
For DVD:  
If the DVD has multiple titles recorded  
on the disc. It can select preferred title  
from the title menu to start playback.  
- Press TITLE during playback.The title  
menu is display.  
- Press the cursor button shown in TV  
screen, select preferred title by the  
cursor button and confirmed by  
ENTER key.  
For VCD:  
Press TITLE/PBC button on the remote  
control while the disc is playing, you can  
switch between "PBC on"and "PBC off"  
mode.  
Multi-subtitle Language Function  
(for DVD Only)  
Press SUBTITLE during playback.  
Each time the button is pressed, number of  
the subtitle language changes in  
sequential order.  
Notes:  
- The language number is different  
according to the disc.  
- Some discs only contain one subtitle  
language.  
16  
 
SETUP  
GENERAL SETUP  
--- GENERAL PAGE ---  
DOLBY  
DOLBY  
-----General setup page----  
-----General setup page----  
TV Display  
Normal/PS  
Normal/LB  
Wide  
TV Display  
LB  
ON  
Angle Mark  
OSD Lang  
Spdif Output  
Captions  
Angle Mark  
OSD Lang  
Spdif Output  
Captions  
ENG  
SPDIF/RAW  
ON  
Screen Saver  
Last Memory  
Screen Saver  
Last Memory  
ON  
ON  
Set TV Display Mode  
Go To General Setup Page  
TV Screen  
Video  
Material  
1. Press SETUP button on the remote  
control .  
Wide(16:9)  
Pan Scan  
Normal  
Letter-box  
4:3  
2.The SETUP menu is displayed.  
3.Select the preferred item by using the  
/
/
/
buttons  
4.Press ENTER button.  
a.GENERAL SETUP  
1.TV DISPLAY SETUP  
This setup page includes the item  
of TV display & audio output feature.  
The detail please refer to  
This is to select the appropriate TV  
aspect (4:3 or 16:9) according to the  
connected TV set.  
GENERAL SETUP MENU.  
b.SPEAKER SETUP  
Normal/PS (For 4:3 TV)  
Played back in the PAN & SCAN style.  
(If connected to wide-screen TV, the  
left and right edges are cut off.)  
Normal/LB (For 4:3 TV)  
This is to activate the audio output  
from DOLBY AC3 5.1 DOWNMIX  
to 2 channel mode. Please refer to  
SPEAKER SETUP MENU.  
c.DOLBY DIGITAL SETUP  
Please refer to DOLBY DIGITAL  
SETUP.  
Played back in letterbox style.  
(If connected to wide-screen TV, black  
bands appear at top and bottom of the  
screen.)  
d.PREFERENCE SETUP  
This setup page includes all the  
configuration of support feature.  
The detail please refer to  
Wide (For 16:9 TV)  
Select when a wide-screen TV set is  
connected.  
PREFERENCES SETUP MENU.  
17  
 
SETUP  
DOLBY  
DOLBY  
-----General setup page----  
TV Display  
-----General setup page----  
TV Display  
ON  
Angle Mark  
OSD Lang  
Spdif Output  
Captions  
Angle Mark  
Osd Lang  
OFF  
SPDIF OFF  
SPDIF/RAW  
SPDIF/PCM  
Spdif Output  
Captions  
Screen Saver  
Last Memory  
Set Angle Mark  
Screen Saver  
Last Memory  
Setup SPDIF  
2.ANGLE MARK DISPLAY SETUP  
If it is set to ON, when the multi-angle  
4.SPDIF OUTPUT  
This is to activate the audio output  
from SPDIF OFF mode to SPDIF/RAW  
mode to SPDIF/PCM mode.  
DVD disc is playing,  
(the angle  
mark) will appears on the screen; if is  
set to OFF, the mark will not appear.  
DOLBY  
DOLBY  
-----General setup page----  
TV Display  
-----General setup page----  
TV Display  
English  
French  
Angle Mark  
OSD Lang  
Spdif Output  
Captions  
Angle Mark  
OSD Lang  
German  
Spanish  
Italian  
ON  
Spdif Output  
OFF  
Captions  
Screen Saver  
Last Memory  
Screen Saver  
Last Memory  
Closed Caption  
Portuguese  
Set OSD Language  
5.CAPTIONS SETUP  
3.OSD LANG TYPE SETUP  
Select the preferred OSD language  
Activate the CAPTIONS feature by  
selecting ON. And release this feat-  
ure by selecting OFF.  
by using the  
/
buttons.  
18  
 
SETUP  
SPEAKER SETUP  
--- SPEAKER SETUP PAGE ---  
DOLBY  
DOLBY  
-----General setup page----  
TV Display  
-----Speaker Setup Page----  
Angle Mark  
OSDLang  
Spdif Output  
Captions  
DOWNMIX  
LT/RT  
STEREO  
ON  
Screen Saver  
Last Memory  
Screen Saver  
OFF  
Set Downmix Mode  
This is to activate the audio output from  
DOLBYAC3 5.1 DOWNMIX to 2 channel  
mode. Select the preferred SPEAKER  
connection by using the cursor buttons.  
Select the LT/RT to activate the Dolby  
surround compatible output.  
6.SCR SAVER SETUP  
Select the SCR SAVER output  
ON/OFF.  
Select the STEREO to activate simple  
stereo mode.  
DOLBY  
DOLBY DIGITAL SETUP  
DOLBY  
-----General setup page----  
TV Display  
-----Dolby Digital Setup----  
Angle Mark  
OSD Lang  
Spdif Output  
Captions  
FULL  
6/8  
DYNAMIC  
4/8  
2/8  
ON  
Screen Saver  
OFF  
OFF  
Last Memory  
Set Last Memory State  
Set DRC OFF  
DYNAMIC RANGE CONTROL  
Select DRC and adjust the dynamic  
range of a Doby Digital encoded  
7.LAST MEMORY SETUP  
Select the LAST MEMORY output  
ON/OFF.  
program. There are 8 steps between  
full compression and off compression.  
19  
 
SETUP  
PREFERENCES SETUP  
--- PREFERENCES PAGE ---  
DOLBY  
DOLBY  
-----Preference Page----  
-----Preference Page----  
TV Type  
PAL  
TV Type  
English  
French  
Spanish  
German  
AUTO  
NTSC  
Audio  
Audio  
Subtitle  
Disc Menu  
Parental  
Password  
Default  
Subtitle  
Disc Menu  
Parental  
Password  
Default  
Italian  
Portuguese  
OFF  
Set TV standard  
Preferred Subtitle Language  
1.TV TYPE SETUP  
3.SUBTITLE LANGUAGE SETUP  
Select the preferred SUBTITLE  
language by using the cursor buttons.  
This player can play discs recorded  
in either PAL or NTSC format.Select  
NTSC format, when you connected to  
NTSC TV.Select PAL format, when  
you connected to PAL TV.Select AUTO  
format, the player TV output format  
will according to the DVD disc format..  
DOLBY  
-----Preference Page----  
TV Type  
DOLBY  
-----Preference Page----  
TV Type  
Audio  
English  
French  
Subtitle  
Disc Menu  
Parental  
Password  
Default  
English  
Audio  
French  
Spanish  
German  
Italian  
Subtitle  
Spanish  
Disc Menu  
German  
Parental  
Portuguese  
Italian  
Password  
Portuguese  
Default  
Preferred Menu Language  
4.DISC MENU LANGUAGE SETUP  
Select the preferred DISC MENU  
language by using the cursor  
buttons.  
Preferred Audio Language  
2.AUDIO LANGUAGE SETUP  
Select the preferred AUDIO sound-  
track by using the cursor buttons.  
20  
 
SETUP  
DOLBY  
DOLBY  
-----Preference Page----  
-----Preference Page----  
TV Type  
1KID SAF  
2G  
TV Type  
Audio  
Audio  
3PG  
Subtitle  
Disc Menu  
Parental  
Password  
Default  
Subtitle  
4PG13  
5PGR  
6R  
Disc Menu  
Parental  
Password  
Default  
7NC 17  
8 ADULT  
OFF  
RESET  
Load Fcatory Setting  
Set Parental Control  
7.DEFAULTS  
Select reset to become factory initial  
setting.  
5.PARENTAL  
Select suitable parental guidance by  
the cursor buttons and conformed by  
pressing ENTER button.  
DEFAULTS TABLE  
DOLBY  
TV DISPLAY  
NORMAL/LB  
ON  
-----Preference Page----  
TV Type  
ANGLE MARK  
OSD LANGUAGE  
ENGLISH  
SPDIF/RAM  
ON  
GENERAL SETUP  
Audio  
SPDIF OUPUT  
CAPTIONS  
Subtitle  
Disc Menu  
Parental  
SCR SAVER  
ON  
LAST MEMORY  
ON  
DOWNMIX  
SPEAKER SETUP  
DOLBY DIGITAL  
STEREO  
OFF  
Password  
Default  
CHANGE  
DYNAMIC  
TV TYPE  
AUDIO  
AUTO  
ENGLISH  
OFF  
Change Password  
SUBTITLE  
6.PASSWORD  
DISC MENU  
Select the change and press ENTER  
button. Type the old password (The  
initial factory code is 1379) and key  
in 4 characters password now you  
want to use, and retype again to  
confirm key in correctly.  
PREFERENCES  
ENGLISH  
8 ADULT  
1379  
PARENTAL  
PASSWORD  
21  
 
SPECIFICATION  
GENERAL  
Supply Voltage  
Current Consumption  
SIGNAL SYSTEM  
:12v Dc (11v-15v)  
:More Then 10 A  
:Compositive Video 1.0vp-p 75  
DISCS PLAYED  
(1)Dvd-video Disc  
5"(12 Cm) Single-sided, Single-layer  
5"(12 Cm) Single-sided, Double-layer  
(2)Compact Disc (cd-da, Video Cd)  
5"(12cm) Disc  
AUDIO SIGNAL OUTPUT  
CHARACTERISTICS  
:2ch&4ch Line Out  
(1)Frequency Response 20 Hz - 20 Khz  
(2)S/n Ratio  
90 Db (jis)  
(3)Wow And Flutter  
Below Measurable Limits  
RADIO  
FM TUNER SECTION  
Tuning Range  
:87.5-107.9MHz  
:10.7MHz  
IF Range  
Usable sensitivity(30dB)  
AM TUNER SECTION  
Frequency Range  
IF Range  
:15dB  
:530-1710KHz  
:450KHz  
Usable sensitivity(30dB)  
:45dB  
NOTE:  
Specifications and design are subject to modification, without notice, due to  
improvements in technology.  
22  
 
TROUBLE SHOOTING  
Before going through the check list, check wiring connection. If any of the problems  
persist after check list has been made, consult your nearest service dealer.  
SYMPTOM  
CAUSE  
SOLUTION  
If the power supply is properly  
connected to the car accessory  
terminal,switch the ignition key  
to "ACC"  
The car ignition switch is  
not on  
No power  
The fuse is blown  
Replace the fuse  
Presence of disc inside the Remove the disc in the player,  
player.  
then put a new one  
Inserting the disc in reverse Insert the compact disc with  
direction  
Disc can not be  
loaded or ejected  
the label facing upward  
Clean the disc or try to play a  
new one  
The disc is extremely dirty  
or defective  
Temperature inside the car  
is too high  
Cool off or until the ambient  
temperature return to normal  
The color system is  
set incorrectly  
Television/video  
imageappears  
black-white  
Please switch to correct color  
system from menu  
Make proper connection  
The unit is not connected  
to the parking brake  
detection switch  
No television/video  
image appears  
according towire connection”  
For safety reasons no television  
/video images are displayed while  
the vehicle is moving.  
The parking brake is not  
engaged  
Engaging the parking brake will  
cause images to be displayed.  
Please the television mode of  
the choice accommodation  
The disc format is not  
accordingto the TV-set  
used (PAL/NTSC)  
No color in picture  
No JPEG files are recorded  
on the disc.  
JPEG disc can  
not be played  
back  
Change the disc  
Change the disc  
Record JPEG files using a  
compliant application  
JPEG files are not recorded  
in a compliant formant  
The built-in microcomputer Press the RESET button.  
is not operating properly  
due to noise  
The operation keys  
do not work  
Front panel is not properly fixed  
into its place  
The antenna cable is not  
connected  
The radio does not  
work  
Insert the antenna cable firmly  
The signals are too weak  
Select a station manually  
888-J9080-05  
23  
 

QVS Switch KVM 102U User Guide
RCA Flat Panel Television RLDED3258A B User Guide
Realistic Scanner 20 25 User Guide
Rival Can Opener CN762 User Guide
RocketFish Video Gaming Accessories RF GWII015 User Guide
Rosen Entertainment Systems Computer Drive DVA 3210 User Guide
Samson Speaker DB1500A User Guide
Samsung DVD Player M301 User Guide
Samsung Home Theater System 20051111103302296 User Guide
Schwinn Elliptical Trainer 438 User Guide