Amplifier Panel
Remote Control
FUNCTIONS OF THE REMOTE CONTROL
1. Stop the MP3 player
2. Switch between USB / SD /Bluetooth
3. Mute the sound of the MP3 player
4. Skip to previous track
5. Skip to next track
6. Play/Pause MP3 player
7. Decrease volume
8. Increase volume
9. EQ to control the tone level
10. Choosing music by numbers
Features :
1. SD card input
2. USB input
3. MP3 Control
MENU
MP3 Player
Repeat
USB /SD SWITCH
Equalizer
MODE
EQ
Last Folder
Next Folder
FOLDER -
FOLDER+
Last Music Song
Next Music Song
Stop/Play
TRACK
TRACK
4. LEVEL : Control the volume of USB /SD
5. LEVEL : Control for Microphone input
6. LEVEL : Control the volume of AUX
7. VOLUME :Master Volume , Control the general volume
8. TREBLE: Control for high frequency
9. BASS: Control for low frequency
10. CLIP LED: LED indicator audio output saturation .This LED lit when the applied input
signal reaches to distortion. Reduce the input level in order to eliminate the distortion.
Power Indicator:This LED Light when the power is working.
11. MIC INPUT : XLR connector to connect microphone
12. 1/4 connector to connect microphone
13. LINE INPUT: RCA connector to control Line input , RCA right channel input ; RCA left
channel input ; Allows you to connect an external audio device (CD,radio,DVD,etc.),
with a Cannon connector.
14. XLR connector to control Line input , Allows you to connect an external audio device
(CD,radio,DVD,etc.), with a Cannon connector.
15. LINE OUT : 1/4 connector to control Line out ; connect other amplifier or even
another powered speaker cabinet in cascade
16. XLR connector to control Line out ; connect other amplifier or even another powered
speaker cabinet in cascade
17. POWER SWITCH : This switch turns on/off the power of speaker
18. AC CONNECTOR :The AC input voltage ,switch automatically from 95V-250V /
50-60Hz , and fuse IEC main inlet
PPHP127AI and PPHP157AI have same features on amplifier .
|